Fujifilm INSTAX Wide Evo Instant Film Camera User Manual

1. Introduction

The Fujifilm INSTAX Wide Evo is a hybrid instant camera designed to combine the best of analog and digital photography. It allows users to capture images with a 16-megapixel sensor, apply various film and lens effects, and print high-quality 3" x 5" instant photos. This manual provides detailed instructions on setting up, operating, maintaining, and troubleshooting your INSTAX Wide Evo camera.

2. Setup

2.1 Unboxing and Included Components

Upon opening the package, ensure all components are present:

• INSTAX Wide Evo Camera Body
• Shoulder Strap
• Lens Cap
• USB Type-C Cable
• Quick Start Guide
• 1 AA Battery (included)

Figure 2.1: Included components with the Fujifilm INSTAX Wide Evo camera.

2.2 Battery Installation

The camera requires one AA battery. To install:

1. Locate the battery compartment cover on the side of the camera.
2. Slide the cover open.
3. Insert the AA battery, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Close the battery compartment cover securely.

2.3 Loading INSTAX WIDE Film

The INSTAX Wide Evo uses INSTAX WIDE instant film (sold separately). Each film pack contains 10 prints.

1. Open the film compartment door on the back of the camera.
2. Align the yellow mark on the film pack with the yellow mark inside the camera's film compartment.
3. Gently push the film pack in until it clicks into place.
4. Close the film compartment door. The camera will automatically eject the black film cover. Do not open the film compartment door until all 10 photos have been taken and ejected.

2.4 Inserting a Micro SD Card (Optional)

While the camera has internal memory, a Micro SD card (sold separately) is recommended for storing a larger number of images.

1. Locate the Micro SD card slot, typically near the battery compartment.
2. Insert the Micro SD card with the contacts facing down until it clicks into place.
3. To remove, push the card in again until it springs out.

3. Operating Instructions

3.1 Power On/Off

To power on the camera, rotate the ON/OFF dial located on the side of the camera. To power off, rotate the dial back to the OFF position.

Figure 3.1: Location of the ON/OFF dial.

3.2 Taking Photos

The INSTAX Wide Evo features a 16-megapixel camera for capturing high-quality digital images before printing.

1. Aim the camera at your subject.
2. Press the Shutter Button to capture the image. The image will be displayed on the 3.5" LCD Monitor.
3. You can choose to print the image immediately or save it to the camera's memory/SD card for later printing.

Figure 3.2: Front view of the camera, showing the lens and shutter button area.

Figure 3.3: Rear view of the camera, displaying the LCD screen.

3.3 Applying Film and Lens Effects

The INSTAX Wide Evo offers 10 lens effects and 10 film effects, along with 5 creative film styles, to enhance your photos.

• Film Style Button: Press the Film Style button (located near the shutter) to cycle through 6 creative film style options.
• Film Effect Dial: Turn the Film Effect Dial (on the side of the camera) to select from 10 striking film effects (e.g., Normal, Monochrome, Vivid, Sepia, Amber, Sky Blue, Summer, Light Green, Magenta, Warm).
• Lens Effect Dial: Turn the Lens Effect Dial (on the other side of the camera) to apply one of 10 unique lens effects (e.g., Normal, Vignette, Soft Glow, Monochrome Blur, Light Leak, Light Prism, Double Exposure, Color Shift, Color Gradient, Beam Flare).
• Degree Control Dial: Adjust the degree of your chosen settings using the Degree Control Dial for subtle or dramatic results.

Figure 3.4: Film Effect Dial.

Figure 3.5: Lens Effect Dial.

3.4 Wide-Angle Mode

The camera features a Wide-Angle Lens to capture more of the scene. To activate or deactivate Wide-Angle Mode, use the dedicated switch located near the lens.

Figure 3.6: Wide-Angle Switch.

3.5 Smartphone App Integration (INSTAX WIDE Evo App)

Download the free INSTAX WIDE Evo Smartphone App to your device to unlock additional features:

• Direct Print: Print any image from your smartphone's camera roll directly to the INSTAX Wide Evo camera via Bluetooth.
• Remote Control: Use the app to control your camera remotely, ideal for group photos or self-portraits.
• Image Transfer: Save your favorite INSTAX framed shots from the camera to your smartphone camera roll for easy sharing on social media.
• Discover Feed: Explore creative inspiration within the app.

Figure 3.7: INSTAX WIDE Evo Smartphone App interface.

3.6 Printing Photos

After capturing or selecting an image, you can print it using the Print Crank.

1. Select the image you wish to print on the LCD screen.
2. Turn the Print Crank (located on the side of the camera) to initiate the printing process.
3. The camera will eject a 3" x 5" INSTAX WIDE instant photo. Development time is approximately 90 seconds.

Figure 3.8: Print Crank.

Figure 3.9: Examples of INSTAX Wide instant photos.

4. Maintenance

4.1 Cleaning the Camera

• Use a soft, dry cloth to wipe the camera body.
• For the lens, use a lens cleaning cloth and lens cleaning solution if necessary. Avoid touching the lens directly with your fingers.
• Do not use abrasive cleaners or solvents.

4.2 Storage

• Store the camera in a cool, dry place away from direct sunlight and extreme temperatures.
• Remove the battery if the camera will not be used for an extended period.
• Keep film packs in their original packaging and store them according to the instructions on the film box.

5. Troubleshooting

If you encounter issues not listed here, please refer to the official Fujifilm support resources.

6. Specifications

7. Warranty and Support

The Fujifilm INSTAX Wide Evo Instant Film Camera comes with a 1 Year Limited Warranty.

For detailed warranty information, technical support, or service inquiries, please visit the official Fujifilm website or contact their customer service department.

Official Fujifilm Store: Fujifilm Amazon Store