INNOREL P364C Carbon Fiber Shooting Tripod Instruction Manual

Introduction

This manual provides detailed instructions for the proper setup, operation, and maintenance of your INNOREL P364C Carbon Fiber Shooting Tripod. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

The INNOREL P364C Carbon Fiber Shooting Tripod is designed for stability and versatility in various outdoor and shooting environments.

Package Contents

Verify that all items listed below are included in your package:

• P364C Tripod x 1
• Extra Quick Release Plate x 1
• Tripod Bag x 1
• Allen Key x 3
• Stainless Steel Spike x 3

Illustration of the complete package contents for the P364C tripod.

Product Features

• High Load Capacity: Constructed from carbon fiber, the tripod supports a maximum load of 77lb/35kg, ensuring stability for heavy camera setups.
• Large Ball Head: Features a 55mm/2.17" diameter ball head with a low center of gravity design for enhanced stability. It offers a ±45-degree tilting angle and 360-degree rotation with a quick locking mechanism.
• Arca Swiss Compatibility: The quick release plate is compatible with the Arca Swiss dovetail system, including a safety stop function to prevent accidental equipment drops.
• Adjustable Leg Angles: The tripod legs can be independently adjusted to three angles (21°, 60°, 82°) for versatile positioning on uneven terrain.
• Interchangeable Spikes: Equipped with screw-in rubber feet and stainless steel spikes for adaptability to various surfaces.
• Compact and Durable Design: Folded length of 26in/66cm and a net weight of 5.3lb/2.4kg, making it portable. The 4-section legs use twist locks for secure adjustment.

Key features and specifications of the INNOREL P364C tripod.

Setup Instructions

1. Unfolding the Tripod

1. Place the tripod on a flat, stable surface.
2. Release the leg angle adjustment buckles on each leg.
3. Extend the legs outwards until they are fully spread or set to your desired angle.
4. Secure the leg angle adjustment buckles.

The quick angle adjustment button allows for easy changes to leg positioning.

2. Adjusting Leg Height

1. Rotate the twist locks on each leg section counter-clockwise to loosen.
2. Extend the leg sections to the desired height.
3. Rotate the twist locks clockwise to secure each section firmly.

Twist locks provide secure and quick adjustment of leg sections.

3. Attaching the Quick Release Plate to Your Camera

1. Locate the quick release plate.
2. Align the screw on the quick release plate with the tripod mount thread on your camera.
3. Tighten the screw securely using the D-ring or an appropriate tool.

4. Mounting Your Camera to the Ball Head

1. Ensure the quick release clamp knob on the ball head is loosened.
2. Slide the quick release plate (with camera attached) into the Arca Swiss dovetail slot on the ball head.
3. Push the safety stop button (if present) and fully insert the plate.
4. Tighten the quick release clamp knob firmly to secure the camera.

The Arca Swiss compatible quick release system ensures secure camera mounting.

5. Changing Spikes

1. Unscrew the rubber feet from the bottom of the tripod legs.
2. Screw in the stainless steel spikes for use on soft ground or ice.
3. Ensure spikes are tightened securely using the provided Allen key if necessary.

Interchangeable spikes provide stability on various terrains.

Operating Instructions

1. Adjusting Ball Head Angle

1. Loosen the main locking knob on the ball head.
2. Adjust your camera to the desired angle (up to ±45 degrees tilt).
3. Tighten the main locking knob firmly to secure the camera position.

The large ball head allows for precise camera positioning and smooth movement.

2. Panning (Horizontal Rotation)

1. Ensure the main locking knob for the ball head is tightened to prevent tilting.
2. Loosen the panning lock knob (usually located at the base of the ball head).
3. Rotate the camera horizontally to the desired position.
4. Tighten the panning lock knob to secure the horizontal position.

Maintenance

• Cleaning: Wipe down the tripod with a soft, damp cloth after each use, especially if used in dusty, sandy, or wet environments. Avoid harsh chemicals.
• Lubrication: Periodically check the twist locks and ball head for smooth operation. If necessary, apply a small amount of silicone-based lubricant to moving parts, avoiding excessive application.
• Inspection: Regularly inspect all screws, bolts, and connections to ensure they are tight. Do not overtighten.
• Storage: Store the tripod in its protective bag in a dry, cool place away from direct sunlight and extreme temperatures.

Troubleshooting

• Tripod is unstable:
  • Ensure all leg sections are fully extended and twist locks are securely tightened.
  • Verify that the leg angle adjustment buckles are locked.
  • Check if the quick release plate is properly seated and clamped on the ball head.
  • Ensure the ground surface is suitable for the chosen feet (rubber for hard surfaces, spikes for soft/uneven ground).
• Ball head movement is stiff or loose:
  • Adjust the main locking knob on the ball head. If it's too stiff, loosen it slightly. If it's too loose, tighten it.
  • Clean any dust or debris from the ball head mechanism.
• Leg sections slide down:
  • Ensure all twist locks are fully tightened. If they continue to slip, inspect for wear or damage.

Specifications

Visual representation of the tripod's key specifications.

Various working heights achievable with the P364C tripod.

Warranty and Support

The INNOREL P364C tripod comes with a 2-year warranty service. For any assistance, questions, or warranty claims, please contact INNOREL customer support.

Contact information can typically be found on the official INNOREL website or through your purchase platform.