1. Introduction
Welcome to the user manual for your new Roborock Q10 S5 Robot Vacuum and Mop. This advanced cleaning device is designed to provide efficient and thorough cleaning for your home, combining powerful vacuuming with intelligent mopping capabilities. Please read this manual carefully to understand the product's features, operation, and maintenance procedures to ensure optimal performance and longevity.
Image: The Roborock Q10 S5 Robot Vacuum and Mop, shown in white with its accompanying mobile app interface.
2. Key Features
The Roborock Q10 S5 is equipped with a range of innovative features to enhance your cleaning experience:
- Ultra-powerful 10,000 Pa Suction: Experience deep cleaning with extreme suction power that effectively lifts dust, crumbs, pet hair, and debris from both hard floors and carpets.
- Tangle-Free Cleaning: Featuring a JawScrapers Comb main brush and an arc side brush, the robot effortlessly handles pet hair and long strands without tangling, ensuring consistent performance.
- VibraRise 2.0 Mopping System: The advanced mopping system delivers 3,000 vibrations per minute and active dual-zone vibration to effectively remove stubborn stains and minimize water streaks.
- Automatic Mop Lifting (8mm): The mop module automatically lifts by 8mm when detecting carpets, allowing for seamless transitions between hard floors and carpets without wetting the latter.
- PreciSense LiDAR Navigation: The LiDAR system performs a 360° scan to create detailed and accurate maps of your home, enabling optimal navigation and multi-floor mapping for up to 4 levels.
- Reactive Tech Obstacle Avoidance: Powered by structured light, the robot detects and bypasses obstacles effortlessly, even in cluttered environments, preventing it from getting stuck.
- Whole-Home Cleaning Duration: Equipped with a 200ml water tank for extended mopping (up to 130m²) and a 500ml dustbin, it offers up to 150 minutes of continuous runtime, automatically recharging and resuming cleaning.
- Ultimate Smart Control: Seamlessly connect via the Roborock App for full customization of cleaning schedules, modes, and map management. Enjoy smart home integration with Alexa, Google Home, and Siri voice commands.
Image: The Roborock Q10 S5 powerfully vacuuming various types of debris, highlighting its 10,000 Pa suction capability.
Image: An illustration of the Roborock Q10 S5's anti-tangle brush system, showing how it prevents hair from wrapping around the brushes.
Image: The Roborock Q10 S5 actively mopping a liquid spill on a hard floor, demonstrating the effectiveness of the VibraRise 2.0 system.
Image: A side view of the Roborock Q10 S5 showing its mop lifting by 8mm as it moves from a hard floor onto a carpet.
Image: The Roborock Q10 S5 emitting a laser beam to map its surroundings, demonstrating its PreciSense LiDAR navigation.
Image: The Roborock Q10 S5 intelligently avoiding objects on the floor, showcasing its Reactive Tech obstacle avoidance system.
Image: A smartphone displaying the Roborock app, illustrating various smart cleaning features like temporary cleaning, auto-boost on carpet, high-intensity mopping, and cleaning along floor grain.
3. Setup Guide
3.1 Unpacking
Carefully remove the robot vacuum, charging dock, and all accessories from the packaging. Ensure all protective films and packing materials are removed from the robot and the dock.
3.2 Charging Dock Placement
- Place the charging dock on a hard, flat surface against a wall.
- Ensure there is at least 0.5 meters (1.6 feet) of clear space on both sides of the dock and 1.5 meters (4.9 feet) in front of it.
- Keep the area free from obstacles, power cords, and reflective surfaces that might interfere with the robot's navigation.
- Connect the power cable to the charging dock and plug it into a wall outlet.
3.3 Initial Charge
Place the robot onto the charging dock. The robot will automatically align itself and begin charging. For optimal battery life, ensure the robot is fully charged before its first use. The indicator light on the robot will change to solid white when fully charged.
4. Operating Instructions
4.1 Connecting to the Roborock App
- Download the 'Roborock' app from the App Store (iOS) or Google Play Store (Android).
- Open the app and create an account or log in.
- Tap '+' to add a new device and follow the in-app instructions to connect your Roborock Q10 S5 to your Wi-Fi network.
4.2 Starting a Clean
- Manual Start: Press the Power button on the robot once to start a full cleaning cycle. Press it again to pause.
- App Control: Use the Roborock app to start, pause, or stop cleaning. You can also select specific rooms, zones, or set custom cleaning modes.
4.3 Mopping Function
- Fill the water tank with clean water. Do not use cleaning solutions not approved by Roborock.
- Attach the mop pad securely to the mop module.
- Insert the mop module into the robot.
- Select a mopping mode in the Roborock app (e.g., Standard, Deep, Custom).
4.4 Customizing Cleaning
The Roborock app allows for advanced customization:
- No-Go Zones & Virtual Walls: Draw virtual boundaries on the map to restrict the robot from entering certain areas.
- Scheduled Cleaning: Set daily or weekly cleaning schedules for automated cleaning.
- Room-Specific Cleaning: Select specific rooms to clean and adjust suction power or water flow for each.
- Carpet Boost: The robot automatically increases suction power when it detects carpet for deeper cleaning.
5. Maintenance
Regular maintenance is crucial for the optimal performance and longevity of your Roborock Q10 S5. Always power off the robot before performing any maintenance.
5.1 Dustbin and Filter Cleaning
- Frequency: After each use.
- Procedure: Remove the dustbin, empty its contents. Remove the filter and tap it against a trash can to remove dust. Rinse the filter with water if necessary, and allow it to air dry completely before reinserting.
5.2 Main Brush Cleaning
- Frequency: Weekly or as needed.
- Procedure: Remove the main brush cover and the main brush. Use the cleaning tool to cut and remove any tangled hair or debris.
5.3 Side Brush Cleaning
- Frequency: Monthly or as needed.
- Procedure: Check the side brush for tangled hair or debris. Remove any obstructions. If the brush is damaged, replace it.
5.4 Mop Pad Cleaning
- Frequency: After each mopping session.
- Procedure: Remove the mop pad from the module and wash it thoroughly with water. Air dry completely before reuse.
5.5 Sensor Cleaning
- Frequency: Monthly or as needed.
- Procedure: Gently wipe all sensors (cliff sensors, wall sensor, charging contacts) on the robot and charging dock with a soft, dry cloth.
5.6 Maintenance Schedule
| Component | Frequency | Action |
|---|---|---|
| Dustbin | After each use | Empty |
| Filter | Weekly / As needed | Clean / Rinse |
| Main Brush | Weekly / As needed | Clean hair/debris |
| Side Brush | Monthly / As needed | Clean / Replace if damaged |
| Mop Pad | After each mopping | Wash |
| Sensors & Charging Contacts | Monthly / As needed | Wipe clean |
6. Troubleshooting
If you encounter any issues with your Roborock Q10 S5, please refer to the table below for common problems and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot not charging | Charging contacts dirty; Power cable disconnected; Robot not properly docked. | Clean charging contacts on robot and dock; Ensure power cable is securely plugged in; Re-dock the robot manually. |
| Robot not moving or stuck | Obstacles blocking path; Wheels tangled; Low battery. | Clear obstacles; Clean wheels and brushes; Charge the robot. |
| Poor suction performance | Dustbin full; Filter clogged; Main brush tangled. | Empty dustbin; Clean or replace filter; Clean main brush. |
| Mopping not effective | Water tank empty; Mop pad dirty or not properly attached. | Fill water tank; Clean or replace mop pad; Ensure mop pad is securely attached. |
| Robot offline in app | Wi-Fi disconnected; Router issues. | Check Wi-Fi connection; Restart router; Reconnect robot to app. |
7. Specifications
Below are the technical specifications for the Roborock Q10 S5 Robot Vacuum and Mop:
| Feature | Specification |
|---|---|
| Brand | roborock |
| Model Name | Roborock Q10 S5 Blanc |
| Item Model Number | Roborock Q10 S5 |
| Color | Roborock Q10 S5 White |
| Product Dimensions (L x W x H) | 41 x 35.3 x 10.1 cm (16.1 x 13.9 x 4.0 inches) |
| Item Weight | 6.69 Kilograms (14.75 lbs) |
| Suction Power | 10,000 Pa |
| Water Tank Capacity | 200 ml |
| Dustbin Capacity | 500 ml |
| Battery Composition | Lithium-ion |
| Surface Recommendation | Hard floor, carpet, wood, tile |
| Controller Type | App Control, Voice Control, Button Control |
| Special Features | Smart Mapping, Smart Mop Lifting, LiDAR Navigation, Advanced Customized Cleaning, Obstacle Avoidance |
8. Warranty and Support
Your Roborock Q10 S5 Robot Vacuum and Mop comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including warranty duration and coverage details.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Roborock Customer Service. You can typically find contact information on the official Roborock website or through the Roborock app.
When contacting support, please have your product model number (Roborock Q10 S5) and purchase information readily available.
