1. Introduction
This manual provides comprehensive instructions for the installation, care, and maintenance of your Bruni Screen Protector, specifically designed for the Topicon MDT865. Our screen protectors are crafted from high-quality, scratch-resistant, and highly transparent PET material, ensuring optimal protection without compromising display clarity or touch sensitivity.
Image: The Bruni Screen Protector product box, showcasing the brand and key features like easy installation, impact and scratch resistance, and "Made in Germany".
Image: An illustration highlighting the key benefits of the Bruni Screen Protector, including simple installation, sensitive touch, safe and scratch-resistant properties, clear colors, German manufacturing, and maximum shatterproof design.
2. Package Contents
Please verify that all items listed below are included in your package:
- Bruni Screen Protector Film (2X)
- Mounting Tool (Squeegee)
- Microfiber Cleaning Cloth
- Detailed Installation Guide (printed)
Image: A visual representation of the package contents, showing the screen protector film, mounting tool, microfiber cloth, and printed installation instructions.
3. Installation Guide
Follow these steps carefully for a bubble-free and precise application of your Bruni Screen Protector. It is recommended to perform the installation in a dust-free environment.
Image: Hands demonstrating the application process of a screen protector onto a device, emphasizing the ease of installation.
- Prepare Your Device: Ensure your Topicon MDT865 screen is completely clean and free of dust, fingerprints, and smudges. Use the provided microfiber cloth to wipe the screen thoroughly. For stubborn marks, a screen cleaning solution can be used, but ensure the screen is dry before proceeding.
- Peel Off Layer 1: Carefully peel back a small portion of the protective film labeled "Layer 1" (or similar indicator) from one end of the screen protector. Avoid touching the adhesive side.
- Align the Protector: Align the exposed adhesive edge of the screen protector with one edge of your device's screen. Take your time to ensure precise alignment with the device's cutouts (e.g., camera, sensors).
- Apply Gradually: Slowly and steadily lower the rest of the screen protector onto the device's screen, simultaneously peeling off "Layer 1" as you go. Use the provided squeegee or a credit card wrapped in the microfiber cloth to gently push out any air bubbles from the center outwards as you apply.
- Remove Remaining Bubbles: If any small bubbles remain, gently push them towards the edges of the screen using the squeegee. Persistent bubbles may indicate a dust particle; if so, carefully lift the nearest edge of the protector, remove the dust with a dust-absorber sticker (not included, but commonly found in screen protector kits), and reapply.
- Remove Layer 2: Once the screen protector is fully applied and free of bubbles, carefully peel off the top protective layer, usually labeled "Layer 2" (or similar indicator). This will reveal the crystal-clear screen protector.
The Bruni Screen Protector is designed for easy, bubble-free application and can be removed or repositioned at any time without leaving residue.
4. Care and Maintenance
To ensure the longevity and clarity of your Bruni Screen Protector, follow these simple care instructions:
- Cleaning: Use the provided microfiber cloth or a soft, lint-free cloth to gently wipe the screen protector. For smudges or fingerprints, lightly dampen the cloth with water or a mild, alcohol-free screen cleaner.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or strong chemical solutions, as these can damage the protector's surface.
- Protect from Sharp Objects: While the protector is scratch-resistant, extreme pressure or sharp objects can still cause damage. Avoid placing your device face down on rough surfaces.
Image: An illustration depicting a key attempting to scratch a screen, with the Bruni logo and "Technology" indicating the protector's scratch-resistant properties.
5. Troubleshooting
Here are solutions to common issues you might encounter during or after installation:
- Bubbles After Installation:
Small bubbles often disappear within 24-48 hours as the adhesive settles. For larger bubbles, gently lift the nearest edge of the protector and reapply, pushing the bubble out with the squeegee.
- Dust Particles Under the Protector:
If you notice dust, carefully lift the edge of the protector closest to the dust particle. Use a dust-absorber sticker (if available) or a piece of tape to gently dab and remove the dust from both the screen and the adhesive side of the protector. Reapply the protector slowly.
- Misalignment:
If the protector is misaligned, carefully lift it entirely from one corner and re-align. The glue-free adhesive allows for repositioning without residue.
6. Product Specifications
| Brand | Bruni |
| Model Number | Bruni Basics-Clear 4053664361754 |
| Compatible Device | Topicon MDT865 |
| Material | Polyethylenterephthalat (PET) |
| Item Hardness | 4H |
| Dimensions (L x W) | Approx. 7.7" x 4.9" (19.56 cm x 12.45 cm) |
| Color | Basics-Clear |
| Finish Type | Glossy |
| Screen Surface | Smooth |
| Special Features | Very easy to apply, Residue-free removable, Made in Germany, Crystal clear |
Image: A vibrant display of flowers on a device screen, illustrating the "True Colors" feature of the Bruni screen protector, ensuring no color attenuation.
Image: A finger interacting with a colorful screen, demonstrating the "Faster-Touch" capability of the screen protector, indicating lightning-fast, highly sensitive, and precise touch response.
7. Manufacturer Information
Brand: Bruni
Manufacturer: atFoliX GmbH
Country of Origin: Germany
Since 2007, Bruni has been dedicated to providing high-quality screen protection solutions. Our protective films are custom-fit, durable, and innovative, developed to offer perfect protection for your devices.
Image: A graphic with the text "PROTECT YOUR VALUABLE DEVICE!" and a message about Bruni's commitment to high-quality screen protection since 2007, along with the Bruni logo.