J.Fkne Twin Bed Frame (Model J.Fkne-RHT01) Instruction Manual

1. Safety Information

Please read and understand all instructions before assembly and use. Keep this manual for future reference.

• Always follow the assembly instructions carefully to prevent instability or collapse.
• Do not exceed the maximum weight capacity of 300 pounds (136 kg).
• Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as needed.
• Keep small parts away from children during assembly to prevent choking hazards.
• Do not allow children to climb on the bed frame or headboard.

2. Product Overview

The J.Fkne Twin Bed Frame is a metal platform bed designed for comfort and convenience. It features integrated LED lighting in the headboard and a built-in charging station.

Key Features:

• Multi-functional LED Light Bed Frame: Vibrant multi-colored RGB LED light strips with mobile app control for over 60,000 colors, customizable brightness, and various modes.
• Convenient Charging Station: Includes 2 standard power outlets, 1 USB port, and 1 Type-C charging port for electronic devices.
• Safe & Sturdy Design: Constructed from high-quality metal for stability and support, ensuring the mattress stays securely in place.
• Noise-Free Operation: Engineered to prevent squeaks or wobbles for an undisturbed sleep environment.
• No Box Spring Needed: Designed for direct mattress placement.
• Under-Bed Storage: Provides approximately 12.4 inches (31.5 cm) of clearance for storage.

Image 1: Overview of the J.Fkne Twin Bed Frame, highlighting its dimensions (L: 75.2", W: 39.8", H: 35.47"), load-bearing capacity, integrated LED lights, and built-in USB ports.

3. Package Contents

Before beginning assembly, ensure all components are present and undamaged. Refer to the included installation manual for a detailed parts list.

• Headboard components
• Footboard components
• Side rails
• Metal slats
• Support legs
• LED light strips and controller
• Charging station unit
• Assembly hardware (screws, bolts, washers, Allen wrench)
• Installation Manual

4. Assembly Instructions (Setup)

Assembly is designed to be straightforward. Follow the step-by-step instructions provided in the included Installation Manual. It is recommended to assemble the bed frame with two people.

General Assembly Steps:

1. Unpack all components and verify against the parts list in the Installation Manual.
2. Attach the headboard and footboard to the side rails using the provided hardware. Do not fully tighten bolts until all major components are connected.
3. Install the central support legs and any additional support beams.
4. Place the metal slats onto the frame, ensuring they are securely fastened or clipped into place.
5. Install the LED light strips into the designated channels on the headboard. Connect the LED controller.
6. Mount the charging station into its designated slot on the headboard.
7. Once all components are in place, fully tighten all bolts and screws.
8. Plug in the power cord for the LED lights and charging station.

Image 2: Illustration of the bed frame's thoughtful embedded design, sturdy metal structure support, and easy assembly features.

5. Operating Instructions

5.1. LED Lights Operation

The integrated RGB LED lights offer a wide range of customization options.

• Remote Control: Use the included remote control to turn the lights on/off, change colors, adjust brightness, and select various lighting modes.
• Mobile App Control: Download the dedicated mobile app (scan the QR code provided with the LED controller or search in your app store). The app allows access to over 60,000 colors, advanced customization, music sync mode, and timing functions.
• Ensure the LED controller is properly connected and powered for functionality.

Image 3: Demonstrates the RGB LED lights feature, highlighting app control for color selection, music mode, and timing functions.

Image 4: Shows the visual effect of the LED lights being off during the day and illuminated at night.

5.2. Charging Station Operation

The headboard features a built-in charging station for your electronic devices.

• Ensure the bed frame's main power cord is plugged into a functional wall outlet.
• Use the 2 standard AC power outlets for devices requiring wall power.
• Use the 1 USB-A port and 1 USB-C port for charging compatible mobile devices, tablets, or other USB-powered electronics.
• Avoid overloading the charging station.

Image 5: Depicts the soft backrest design of the headboard and the integrated charging station with AC outlets and USB ports.

6. Maintenance

Regular maintenance helps prolong the life and appearance of your bed frame.

• Cleaning: Wipe metal surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Hardware Check: Periodically inspect all bolts and screws to ensure they remain tight. Re-tighten as necessary to maintain stability and prevent noise.
• LED Lights: Keep the LED strips clean and free of dust. If the adhesive weakens, re-secure with appropriate adhesive tape or clips.
• Charging Station: Ensure the charging ports are free of dust and debris. Do not force plugs into the outlets.

7. Troubleshooting

Refer to the following common issues and solutions:

• Issue: Bed frame is squeaking or wobbling.
  Solution: Check all assembly bolts and screws. Tighten any loose connections. Ensure the bed frame is on a level surface.
• Issue: LED lights are not turning on or are flickering.
  Solution: Verify the power cord for the LED controller is securely plugged in. Check the connection between the LED strips and the controller. Ensure the remote control has working batteries or try controlling via the mobile app.
• Issue: LED light strips are detaching from the headboard.
  Solution: The adhesive on the light strips may weaken over time. Re-secure the strips using strong double-sided tape or small adhesive clips.
• Issue: Charging station is not working.
  Solution: Ensure the bed frame's main power cord is fully plugged into a functional wall outlet. Test the wall outlet with another device. Check if the charging station unit is properly seated in its slot.
• Issue: Mobile app cannot control the LED lights.
  Solution: Ensure Bluetooth is enabled on your device and the app has necessary permissions. Try restarting the app and reconnecting. Verify the LED controller is powered on.

8. Specifications

Image 6: Illustrates the under-bed storage clearance of 12.4 inches (31.5 cm) and the thoughtful embedded design that keeps the mattress in place.

9. Warranty Information

J.Fkne products are manufactured to high-quality standards. For specific warranty details regarding your bed frame, please refer to the warranty card included in your package or contact customer support.

10. Customer Support

If you have any questions, require assistance with assembly, or encounter any issues with your J.Fkne Twin Bed Frame, please do not hesitate to contact our customer support team. Refer to the contact information provided in your purchase documentation or on the official J.Fkne website.

When contacting support, please have your model number (J.Fkne-RHT01) and purchase date readily available.