Introduction
This manual provides detailed instructions for assembling and operating your NEWABWN City Coffee House Architecture Building Blocks Set (Model GQ018). Please read all instructions carefully before beginning assembly to ensure a smooth and enjoyable building experience. This set is designed for individuals aged 14 and above.
Safety Information
- Small Parts Warning: This set contains small parts which may pose a choking hazard for children under 3 years old. Keep all components out of reach of young children.
- Adult Supervision: Adult supervision is recommended during assembly, especially for younger builders.
- Material Safety: The building blocks are made from high-quality ABS plastic. Do not ingest any parts.
- Electrical Components: The set includes a lighting feature. Handle electrical components with care. Do not expose to water or extreme temperatures.
Package Contents
Before starting assembly, verify that all components are present. The package should contain:
- 581 Building Block Pieces
- 1 Instruction Manual
- 1 Lighting Starter Device
Image: Overview of various building block pieces and modular sections before full assembly.
Assembly Instructions
Follow the step-by-step diagrams provided in the included instruction manual. Sort pieces by color and shape to facilitate the building process.
Step 1: Base Construction
Begin by assembling the base plate and the foundational structure of the coffee house. Ensure all pieces are firmly connected.
Step 2: First Floor Assembly
Construct the first floor, including the coffee bar and sofa resting area. Pay attention to the placement of decorative elements and signage.
Image: Close-up of the first floor interior, highlighting the coffee bar and seating arrangement.
Step 3: Second Floor Assembly
Proceed with the construction of the second floor, which features a lounge and terrace. Connect the second floor securely to the first floor.
Image: The fully assembled two-story coffee house model, ready for display.
Step 4: Integrating the Lighting System
The lighting starter device is integrated into the roof section. Carefully follow the manual's instructions to install it. The light is activated by removing a specific lid on the rooftop.
Image: Illustration of the modular assembly and the mechanism for activating the internal light by removing a roof panel.
Image: Close-up views of various high-quality building block components, demonstrating smooth edges and precise fit.
Video: A demonstration of the assembly process and the activation of the coffee house's internal lighting system.
Operating Instructions
Activating the Light
- Locate the designated lid on the rooftop of the assembled coffee house model.
- Gently remove this lid to reveal the lighting starter device.
- Flip the switch on the lighting device to turn the internal lights on.
- To turn off the light, flip the switch back to its original position and replace the lid.
Image: Comparison showing the coffee house model with its internal lights off and then illuminated, highlighting the effect.
Maintenance
- Cleaning: Use a soft, dry cloth to gently wipe dust from the model. For stubborn dirt, a slightly damp cloth can be used, but ensure no water enters the electrical components.
- Storage: Store the model in a cool, dry place away from direct sunlight to prevent discoloration or damage to the plastic.
- Handling: Handle the assembled model with care to avoid accidental disassembly.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Missing pieces | Packaging error or pieces misplaced during unboxing. | Carefully check all packaging materials. If still missing, contact customer support. |
| Light not working | Switch not activated, or battery issue (if applicable, though not specified as battery-powered). | Ensure the light switch is in the "ON" position. Verify the lighting component is correctly installed. |
| Model unstable | Blocks not fully pressed together. | Review assembly steps and ensure all blocks are securely connected. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | GQ018 |
| Brand | NEWABWN |
| Material | Plastic (ABS) |
| Number of Pieces | 581 |
| Recommended Age | 14+ years |
| Product Dimensions (L x W x H) | Approx. 14.5 cm x 10.5 cm x 12 cm (5.7 in x 4.13 in x 4.72 in) |
| Weight | 560 g (approx. 1.23 lbs) |
| Special Features | Integrated LED lighting system, Modular design |
Image: Dimensions of the assembled City Coffee House model.
Warranty and Support
For any questions regarding assembly, missing parts, or product functionality, please refer to the contact information provided with your purchase or visit the official NEWABWN website for customer support.
This product comes with a standard manufacturer's warranty. Please retain your proof of purchase for warranty claims.