1. Introduction
This manual provides comprehensive instructions for the ALLIMITY replacement remote control, designed for use with various BSL Smart LED TV models. This remote offers full functionality without requiring any programming or setup, ensuring a seamless user experience. Please read this manual carefully to understand the features and proper operation of your new remote control.
Image 1: Angled front view of the ALLIMITY remote control, showcasing its button layout.
2. Compatibility
This ALLIMITY remote control is compatible with the following BSL Smart LED TV models:
- SF-01
- BSL-2212V
- BSL-24T2SATV
- BSL-32T2S
- BSL-24T2S
- BSL-32T2
- BSL-32T2SATV
To confirm compatibility, compare your original remote control or your TV's model number (usually found on a label on the back of the TV) with the list provided. The remote is designed to function identically to the original remote for these models.
3. Key Features
- No Programming Required: Ready to use directly out of the package.
- Full Functionality: Designed to replicate all functions of the original remote control.
- Ergonomic Design: Lightweight and comfortable to hold, providing a secure grip.
- Stable Performance: Offers a consistent and reliable signal transmission.
- Infrared Technology: Utilizes standard infrared (IR) communication for TV control.
4. Setup: Battery Installation
The ALLIMITY remote control requires two AAA batteries (not included) for operation. Follow these steps to install the batteries:
- Locate the battery compartment on the back of the remote control.
- Press down on the tab and slide the battery compartment cover downwards to open it.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Note: Always replace both batteries at the same time. Do not mix old and new batteries, or different types of batteries.
Image 2: Rear view of the remote control, showing the battery compartment cover.
5. Basic Operation
This section outlines the primary functions of the buttons on your ALLIMITY remote control. Refer to your BSL TV's user manual for specific advanced functions.
| Button | Function |
|---|---|
| POWER | Turns the TV on or off. |
| MUTE | Mutes or unmutes the TV sound. |
| 0-9 (Number Buttons) | Directly select TV channels. |
| VOL +/- | Adjusts the volume level. |
| CH +/- | Changes the TV channel up or down. |
| SOURCE | Selects input sources (e.g., HDMI, AV). |
| MENU | Accesses the TV's main menu. |
| OK / Navigation Arrows | Navigates through menus and confirms selections. |
| EXIT | Exits the current menu or function. |
| HOME | Returns to the TV's home screen or smart TV interface. |
| INFO | Displays program information. |
| FAV | Accesses favorite channels list. |
| P.MODE | Changes picture modes. |
| S.MODE | Changes sound modes. |
| AUDIO | Selects audio tracks or languages. |
| EPG | Opens the Electronic Program Guide. |
| REC | Initiates recording (if supported by TV and external storage). |
| TV/RADIO | Switches between TV and Radio modes. |
| ASPECT | Adjusts the screen aspect ratio. |
| SLEEP | Sets the sleep timer. |
| FREEZE | Freezes the current image on screen. |
| SUB-T | Activates or deactivates subtitles. |
| PVR.LIST | Accesses the PVR recording list. |
| TTX | Opens Teletext. |
| INDEX | Accesses index functions (e.g., Teletext index). |
| ZOOM | Zooms in or out on the screen. |
| TSR | Time Shift Recording function. |
| HOLD | Holds Teletext page. |
| REVEAL | Reveals hidden Teletext information. |
| SUB-P | Sub-page selection for Teletext. |
| Colored Buttons (Red, Green, Yellow, Blue) | Context-sensitive functions, often used in Smart TV apps or Teletext. |
| Playback Controls (Rewind, Play/Pause, Fast Forward, Previous, Stop, Next) | Controls media playback for connected devices or recorded content. |
Image 3: Front and side view of the remote control, illustrating its full button layout and physical dimensions (21 cm / 8.27 in length, 5 cm / 1.97 in width).
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or abrasive materials.
- Battery Care: Remove batteries if the remote control will not be used for an extended period to prevent leakage.
- Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Drops: Protect the remote from physical impact, as drops can damage internal components.
7. Troubleshooting
| Problem | Solution |
|---|---|
| Remote control is not responding. |
|
| Some buttons are not working. |
|
| Remote control range is reduced. |
|
8. Specifications
| Feature | Detail |
|---|---|
| Brand | ALLIMITY |
| Model Number | BSL-2212V-32T2 |
| Compatible Devices | SF-01, BSL-2212V, BSL-24T2SATV, BSL-32T2S, BSL-24T2S, BSL-32T2, BSL-32T2SATV |
| Connectivity Technology | Infrared (IR) |
| Maximum Range | 10 Meters |
| Power Source | 2 x AAA Batteries (not included) |
| Product Dimensions | 17 x 5 x 1 cm (approximately 6.7 x 2 x 0.4 inches) |
| Item Weight | 59 Grams (approximately 2.08 ounces) |
| Special Features | Ergonomic design |
9. Warranty and Support
Specific warranty information for this ALLIMITY remote control is not provided in the product details. For any support inquiries, troubleshooting assistance beyond this manual, or warranty claims, please contact the seller or manufacturer directly through your purchase platform.
Please retain your proof of purchase for any potential warranty or support claims.
