Introduction
This manual provides comprehensive instructions for the Anderic RRTX028C-S remote control, designed as a direct replacement for A25-TX028C-S remote controls used with Hampton Bay and Home Decorators Collection ceiling fans. It enables convenient control over fan speeds, light functions, and light color-changing options.
Product Overview
The Anderic RRTX028C-S is a white-colored remote control featuring an ergonomic design for comfortable handling. It includes dedicated buttons for fan speed adjustment, light on/off, and light color temperature control.
Image: A comparison showing an old black remote on the left and the new white Anderic RRTX028C-S remote on the right, illustrating the replacement.
Image: Front and back view of the Anderic RRTX028C-S remote control, displaying the button layout on the front and the battery compartment with a QR code on the back.
For convenient storage and easy access, the remote also comes with a wall mount.
Image: A demonstration of the wall mount for the Anderic RRTX028C-S remote, showing how it can be securely stored on a wall.
Compatibility
The Anderic RRTX028C-S is specifically engineered to replace the A25-TX028C-S remote control. It is compatible with various Hampton Bay and Home Decorators Collection ceiling fans.
Image: An image titled "Compatible with Ashby Park Models" listing several specific Ashby Park, Beckford, Chelton, and Mena ceiling fan models that are compatible with the Anderic RRTX028C-S remote.
Important: This remote only replaces the A25-TX028C-S. Please confirm your old remote reads the same model number for guaranteed compatibility.
Setup Instructions
1. Battery Installation
The remote requires 2 AAA batteries (not included).
- Open the battery compartment cover located on the back of the remote control.
- Insert 2 AAA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover.
Image: A diagram illustrating how to open the battery housing cover and insert 2 AAA batteries into the remote control.
2. Pairing with Dip Switches
The remote utilizes five dip switches for pairing. Four switches adjust the frequency, and one switch controls the dimming function.
- With the battery compartment open, locate the five dip switches.
- Match the pattern of the four upper switches to the pattern found on your ceiling fan's receiver unit or your old remote control.
- Use the fifth switch to toggle the dimming function on or off according to your preference.
- Once the dip switches are set, the remote should operate seamlessly with your ceiling fan.
Image: A diagram showing the location of the dip switches inside the battery compartment and the two-step pairing process: 1. Open battery compartment, install batteries, locate dip switches. 2. Adjust top four switches to match existing remote or receiver.
Operating Your Remote Control
The Anderic RRTX028C-S remote provides complete control over your ceiling fan's functions.
Image: An image showing the remote control and a ceiling fan, with text labels indicating the functions of each button: Ceiling fan ON/OFF, 3 fan speeds, Light ON/OFF and dimming, and Control both light and color settings (CCT - Correlated color temperature button).
Fan Speed Control
Use the dedicated fan speed buttons (1, 2, 3, 0) to adjust the fan's rotation speed:
- 1: Low speed
- 2: Medium speed
- 3: High speed
- 0: Fan Off
The fan icon button typically cycles through speeds or acts as an on/off for the fan.
Light Control
The remote features a light button to turn the fan light on or off. If dimming is enabled via the dip switch, press and hold the light button to adjust the brightness.
Light Color Temperature (CCT) Control
The button with the colorful light bulb icon allows you to change the color temperature of your ceiling fan's light, if supported by your fan. Press this button to cycle through available color temperature settings.
Maintenance
Battery Replacement
Replace the 2 AAA batteries when the remote's performance diminishes or it stops responding. Follow the battery installation steps in the "Setup Instructions" section.
Always dispose of used batteries responsibly according to local regulations.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding | Batteries are dead or incorrectly inserted | Check battery polarity, replace batteries. |
| Remote not responding | Dip switches do not match receiver | Re-check and adjust dip switches to match your fan's receiver or old remote. |
| Fan or light functions intermittently | Weak batteries or interference | Replace batteries. Ensure no strong interference sources nearby. |
| Dimming function not working | Dimming dip switch is off | Ensure the fifth dip switch (dimming) is set to the 'on' position. |
If issues persist after troubleshooting, please contact customer support.
Specifications
- Model: RRTX028CS
- Dimensions: 6 x 2 x 1 inches
- Item Weight: 2.08 ounces
- Power Source: 2 x AAA Batteries (not included)
- Compatibility: Direct replacement for A25-TX028C-S remote controls for Hampton Bay and Home Decorators Collection ceiling fans.
- Color: White
- Special Feature: Ergonomic design, Wall Mount included
- Manufacturer: Dan's Electronics Etc., Inc.
- Country of Origin: China
Image: An image showing the dimensions of the remote control: 5.25 inches in length, 2 inches in width, and 1 inch in depth, highlighting its compact and comfortable design.
Warranty and Support
For warranty information or technical support, please refer to the manufacturer's official website or contact Anderic customer service.
Manufacturer: Dan's Electronics Etc., Inc.
For further assistance, visit the Anderic Store on Amazon.
