Legami Erasable Gel Pens User Manual

1. Introduction

Thank you for choosing Legami Erasable Gel Pens. This set includes 8 unique pens, each featuring a charming animal design and thermosensitive ink that allows for clean erasing. The pens are designed for smooth writing and offer a 0.7mm tip for precise lines. This manual will guide you through the proper use and care of your new pens.

Overview of the eight Legami erasable gel pens, each with a distinct animal design and ink color.

2. Setup

Your Legami Erasable Gel Pens are ready for immediate use. Simply remove the protective cap from the pen tip before writing.

3. Operating Instructions

3.1 Writing

Hold the pen comfortably and apply light pressure to write. The 0.7mm tip provides a smooth and consistent ink flow. Each pen features a specific ink color corresponding to its animal design:

• Panda: Black ink
• Bunny: Purple ink
• Corgi: Black ink
• Teddy Bear: Red ink
• Llama: Blue ink
• Unicorn: Pink ink
• Hippo: Blue ink
• Penguin: Turquoise ink

Detail of the Panda pen, indicating its black ink color.

Illustration of an erasable pen in use, highlighting the freedom to correct mistakes.

3.2 Erasing

To erase, use the rubber tip located at the end of the pen. The thermosensitive ink becomes transparent when friction heat is applied by the eraser. Gently rub the eraser over the ink you wish to remove. The eraser tip is designed not to wear down like traditional erasers and will not damage the paper surface.

Detail of the pen's cap and the integrated eraser tip.

3.3 Ink Reappearance (Special Feature)

The thermosensitive ink has a unique property: it can reappear when exposed to temperatures below -10°C (14°F). If you place a document written with these pens into a freezer, the erased ink may become visible again. This feature can be used for fun activities, such as creating 'secret messages'.

Step-by-step guide on how the thermosensitive ink can be erased and then reappear when exposed to cold temperatures.

4. Maintenance

To ensure the longevity and performance of your Legami Erasable Gel Pens, please follow these maintenance guidelines:

• Storage: Store pens at room temperature, away from direct sunlight or extreme heat sources. High temperatures can cause the ink to become transparent, similar to the erasing process.
• Cap Usage: Always replace the cap firmly after use to prevent the ink from drying out.
• Refills: These pens are designed to be refillable with Legami thermosensitive ink refills. Refer to Legami's official website or product packaging for compatible refill options.

5. Troubleshooting

• Ink not flowing: If the ink does not flow smoothly, try scribbling on a piece of scrap paper to prime the tip. Ensure the pen has not been exposed to high temperatures, which can temporarily make the ink invisible.
• Erasing not effective: Ensure the eraser tip is clean. Apply gentle, consistent pressure when erasing. If the ink is not fully disappearing, the paper might be too thin or textured, or the pen might have been pressed too hard during writing.
• Ink reappearing: This is a normal characteristic of thermosensitive ink when exposed to cold temperatures (below -10°C / 14°F). If you do not wish for ink to reappear, avoid exposing written documents to cold environments.

6. Specifications

7. Warranty and Support

For information regarding product warranty, returns, or technical support, please visit the official Legami website or contact their customer service department. Keep your purchase receipt as proof of purchase.

Legami Official Website: www.legami.com