PAUL B iPad 10th Generation Keyboard Case User Manual

1. Product Overview

The PAUL B Keyboard Case is designed to enhance your iPad 10th Generation (10.9-inch, 2022) experience by providing a protective cover and a wireless Bluetooth keyboard. It features a built-in pencil holder and an auto sleep/wake function to conserve battery life.

Image: PAUL B iPad 10th Generation Keyboard Case. This image shows the black keyboard case with an iPad inserted, illustrating its protective design and integrated keyboard.

2. Package Contents

• 1 x PAUL B iPad Keyboard Case
• 1 x USB-C Charging Cable
• 1 x User Guide

Note: Apple iPad and charging plug are sold separately and are not included.

3. Setup Instructions

3.1 Compatibility Check

This keyboard case is specifically designed for the iPad 10th Generation 2022 (10.9 inch). Compatible iPad models include: A2696, A2757, A2777. Please verify your iPad's model number on the back of the device before proceeding.

3.2 Charging the Keyboard

1. Locate the USB-C charging port on the keyboard.
2. Connect the provided USB-C cable to the keyboard and a compatible USB power adapter (not included).
3. The charging indicator light will illuminate. A full charge typically takes 2-3 hours.
4. Once fully charged, the indicator light will change or turn off.

The keyboard features an 800 mAh battery, providing up to 140 days of standby time without backlight. With backlight on for 2-3 hours daily, the battery can last approximately one week.

3.3 Installing the iPad

1. Open the keyboard case.
2. Align your iPad with the case's frame, ensuring the camera cutout and ports match.
3. Gently press the iPad into the case until it is securely seated. Ensure all edges are protected.

3.4 Bluetooth Pairing

1. Turn on the keyboard by sliding the power switch to the 'ON' position. The indicator light will flash.
2. Press the 'Connect' button (often indicated by a Bluetooth symbol) on the keyboard. The Bluetooth indicator light will start blinking rapidly, indicating it's in pairing mode.
3. On your iPad, go to Settings > Bluetooth.
4. Ensure Bluetooth is turned 'ON'.
5. Your iPad will search for available devices. Select "Bluetooth Keyboard" or a similar name from the list.
6. If prompted, enter the pairing code displayed on your iPad screen using the keyboard, then press Enter.
7. Once paired, the Bluetooth indicator light on the keyboard will stop blinking and remain solid or turn off, and your iPad will show the keyboard as "Connected".

4. Operating Instructions

4.1 Basic Keyboard Functions

• Typing: Use the keyboard as you would a standard computer keyboard.
• Function Keys: The top row of keys provides quick access to iPad functions such as Home, Search, Volume, and Media Controls.
• Special Characters: Use the Shift key for uppercase letters and symbols.

4.2 Backlight Control

The keyboard features a backlight for use in low-light conditions. To control the backlight:

• Press the Light Bulb key (often located near the function keys) to cycle through different backlight brightness levels or to turn it off.
• The backlight will automatically turn off after 60 seconds of inactivity to conserve power.

4.3 Auto Sleep/Wake Function

The case supports an auto sleep/wake function. Closing the case will put your iPad to sleep, and opening it will wake your iPad. This feature helps extend your iPad's battery life.

4.4 Pencil Holder

The integrated pencil holder is designed to securely store your Apple Pencil (or compatible stylus) when not in use, preventing loss and ensuring it's always accessible.

5. Maintenance

5.1 Cleaning

• To clean the exterior of the case, use a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
• For the keyboard, use a soft, dry cloth or a can of compressed air to remove dust and debris between keys.
• Ensure the keyboard is turned off before cleaning.

5.2 Storage

When not in use for extended periods, store the keyboard case in a cool, dry place. It is recommended to fully charge the keyboard before long-term storage to maintain battery health.

6. Troubleshooting

6.1 Keyboard Not Connecting/Pairing

• Check Power: Ensure the keyboard is turned on and fully charged.
• Re-pair: Delete the keyboard from your iPad's Bluetooth device list (Settings > Bluetooth > "i" icon > Forget This Device), then repeat the pairing steps in Section 3.4.
• Restart Devices: Turn off and restart both your iPad and the keyboard.
• Interference: Move away from other wireless devices that might cause interference.

6.2 Keys Not Responding

• Battery Level: The keyboard battery might be low. Charge the keyboard.
• Connection: Ensure the keyboard is properly connected via Bluetooth.
• Restart: Turn the keyboard off and on again.

6.3 Backlight Not Working

• Battery Level: The backlight feature consumes more power. Ensure the keyboard is sufficiently charged.
• Activate: Press the Light Bulb key to turn on or adjust the backlight.

7. Specifications

8. Warranty and Support

PAUL B provides a 24-hour after-sales service guarantee for this product. If you encounter any issues or have questions regarding your keyboard case, please contact PAUL B customer support for assistance. Refer to the contact information provided in the packaging or on the official PAUL B website.