Introduction
This manual provides instructions for the assembly, use, and maintenance of your eHemco Solid Wood Square End Table with X-Design. Please read these instructions carefully before assembly and retain them for future reference. Proper assembly and care will ensure the longevity and stability of your furniture.
Safety Information
- Ensure proper assembly to avoid tipping.
- Do not exceed the maximum weight limit of 40 pounds on any shelf or the tabletop.
- Keep small parts away from children during assembly.
- Assemble on a soft, clean surface to prevent scratching the furniture.
Package Contents
Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Tabletop (1)
- Bottom Shelf (1)
- Middle Shelf (1)
- Side Panels with X-Design (2)
- Legs/Support Posts (4)
- Assembly Hardware (screws, dowels, L-wrench)
Setup and Assembly Instructions
Tools recommended for assembly: Screwdriver (not included). An L-wrench is typically included with the hardware.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent scratches.
- Attach Side Panels: Secure the X-design side panels to the support posts using the provided screws. Ensure the X-design faces outwards as desired.
- Install Bottom Shelf: Attach the bottom shelf to the lower section of the assembled side panels and support posts. Use dowels and screws to secure it firmly.
- Install Middle Shelf: Position the middle shelf between the side panels and support posts. Secure it using the provided dowels and screws. Note: Some users have reported that pre-drilled holes for screws on the middle shelf may not be present; if so, the dowels should provide sufficient support, or a small pilot hole can be carefully drilled.
- Attach Tabletop: Place the tabletop onto the upper section of the assembled structure. Align the pre-drilled holes and secure it with screws.
- Tighten All Fasteners: Once all parts are in place, gently tighten all screws and fasteners. Do not overtighten to avoid damaging the wood.
- Final Placement: Carefully move the assembled table to its desired location.
Figure 1: Product Dimensions. This image illustrates the overall dimensions of the assembled end table, measuring 16 inches in depth, 16 inches in width, and 24 inches in height.
Figure 2: Assembled End Table. A clear view of the fully assembled eHemco end table, highlighting its cherry finish and three-tiered structure.
Operating and Usage
The eHemco Solid Wood Square End Table is designed for versatile use in various indoor settings.
- Placement: Ideal as an end table in a living room, a nightstand in a bedroom, or an accent piece in a hallway.
- Storage: Utilize the three tiers for displaying decorative items, storing books, magazines, or other small household items.
- Weight Distribution: Distribute weight evenly across the shelves and tabletop to maintain stability. Do not place excessively heavy items on the table.
Figure 3: End Table in Use. This image shows the end table positioned next to a sofa, demonstrating its functional use as a side table with items displayed on its shelves.
Maintenance
To maintain the appearance and integrity of your end table, follow these care instructions:
- Cleaning: Clean the surface with a soft, dry cloth. Avoid abrasive cleaners or harsh chemicals that may damage the cherry finish.
- Spills: Wipe up spills immediately with a soft, damp cloth to prevent staining.
- Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration of the wood finish.
- Heat and Moisture: Protect the surface from extreme heat and moisture. Use coasters under beverages and hot items.
- Periodic Check: Periodically check and tighten all assembly hardware to ensure the table remains stable.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly | Loose fasteners; uneven floor | Tighten all screws. Ensure the table is on a level surface; use furniture pads if necessary. |
| Parts do not align during assembly | Incorrect orientation of parts; overtightened screws | Review the assembly steps and diagrams. Loosen screws slightly to adjust alignment, then retighten. |
| Scratches on surface | Rough handling; abrasive cleaning | Use furniture polish or touch-up pens for minor scratches. Always use soft cloths for cleaning. |
Specifications
- Brand: eHemco
- Model Name: End Table
- Model Number: CS7372
- Product Dimensions: 16"D x 16"W x 24"H
- Item Weight: 21 Pounds
- Maximum Weight Recommendation: 40 Pounds
- Color: Cherry
- Frame Material Type: Rubber Wood
- Top Material Type: Engineered Wood
- Number of Items: 1
- Assembly Required: Yes
- Recommended Number of People for Assembly: 1
Warranty and Support
eHemco products are manufactured with quality and durability in mind. For specific warranty details, please refer to the product packaging or contact eHemco customer service directly. If you encounter any issues or require assistance with your product, please reach out to the retailer or manufacturer's support channels.
For further assistance, please visit the eHemco Store on Amazon.