1. Introduction
Thank you for choosing the VASAGLE Dining Chairs. This manual provides essential information for the safe assembly, use, and maintenance of your new chairs. Please read these instructions carefully before assembly and retain them for future reference.
Image 1.1: VASAGLE Dining Chairs in a dining room setting.
These chairs feature a glacier-textured synthetic leather surface, metal frames, and adjustable feet, designed for comfort and durability in your kitchen or dining area.
2. Safety Information
- Maximum Weight Capacity: Each chair is designed to support a maximum static weight of 265 lb (120 kg). Do not exceed this limit.
- Stability: Ensure all adjustable feet are properly set to achieve stability on uneven floors.
- Assembly: Follow all assembly instructions carefully. Do not use power tools for assembly unless specified, as this may overtighten screws and damage components.
- Usage: Do not stand on the chairs. Avoid sudden impacts or excessive force.
- Children: Keep small parts away from children during assembly. Adult supervision is recommended when children are using the chairs.
3. Package Contents
Before beginning assembly, please verify that all components listed below are present and undamaged:
- 4 x Chair Seats (with pre-attached backrests)
- 4 x Chair Leg Frames
- 1 x Assembly Kit (includes screws, washers, and Allen key)
- 1 x Instruction Manual (this document)
4. Assembly Instructions
Assembly of each chair typically takes approximately 5 minutes. Follow these steps for quick and correct assembly:
- Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface to prevent scratches.
- Attach Leg Frame: Align the leg frame with the pre-drilled holes on the underside of the chair seat. Ensure the 'Front' marking on the leg frame aligns with the front of the chair seat.
- Secure Screws: Insert the provided screws with washers into the holes. Hand-tighten all screws initially.
- Final Tightening: Once all screws are in place, use the Allen key to fully tighten them. Do not overtighten.
- Adjust Feet: Turn the chair upright. Adjust the leveling feet at the bottom of each leg to ensure the chair is stable and does not wobble.
Image 4.1: Visual guide for chair assembly.
Image 4.2: Assembly tips for correct leg orientation.
Video 4.1: Official VASAGLE guide for 5-minute chair assembly.
5. Operating Instructions
These dining chairs are designed for indoor use. The 105° inclined backrests provide ergonomic support for comfortable seating during meals or extended periods.
Image 5.1: Ergonomic design for comfortable seating.
The adjustable feet allow you to fine-tune the chair's height and stability on various floor surfaces, preventing wobbling and protecting your floors from scratches.
Image 5.2: Adjustable feet for stability.
Video 5.1: Overview of VASAGLE Dining Chairs in a kitchen setting.
6. Maintenance and Care
To ensure the longevity and appearance of your VASAGLE Dining Chairs, follow these care guidelines:
- Cleaning: The synthetic leather surface is water-resistant and easy to clean. Wipe spills immediately with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
- Dusting: Regularly dust the chairs with a soft, dry cloth.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause the synthetic leather to fade or crack over time.
- Heat Sources: Keep chairs away from direct heat sources like radiators or fireplaces.
Image 6.1: Stylish and practical design with easy-to-clean synthetic leather.
7. Troubleshooting
If you encounter any issues with your dining chairs, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair wobbles | Uneven floor or loose adjustable feet. | Adjust the leveling feet on each leg until the chair is stable. Ensure all screws are tightened. |
| Screws loosen over time | Normal wear and tear from use. | Periodically check and retighten all assembly screws using the provided Allen key. |
| Stains on synthetic leather | Spills not cleaned promptly. | Wipe immediately with a soft, damp cloth. For stubborn stains, use a mild soap solution and then wipe with a clean, damp cloth. Dry thoroughly. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | UKDC188K01 |
| Brand | VASAGLE |
| Color | Caramel Brown |
| Material | Plywood, Steel, Synthetic Leather, Foam |
| Product Dimensions (D x W x H) | 21.6" x 17.1" x 33.7" (54.9 x 43.4 x 85.6 cm) |
| Seat Depth | 15.7 inches (39.9 cm) |
| Item Weight (per chair) | Approx. 10.4 lb (4.7 kg) (Total 41.6 lb for set of 4) |
| Maximum Static Weight Capacity | 265 lb (120 kg) |
| Included Components | 4 Chairs, Assembly Kit, Instructions |
| Indoor/Outdoor Usage | Indoor |
Image 8.1: Product dimensions and weight capacity.
Image 8.2: Detail of plush foam padding for enhanced comfort.
9. Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official VASAGLE website. Keep your proof of purchase for any warranty claims.