OUCAXIA Y50S Robotic Pool Cleaner User Manual

1. Introduction

The OUCAXIA Y50S Robotic Pool Cleaner is an advanced, cordless solution designed to efficiently clean inground pools up to 2000 sq.ft. It features powerful suction, smart path navigation, and wall-climbing capabilities to ensure a thorough clean of your pool's floor, walls, and waterline. This manual provides essential information for the safe and effective operation and maintenance of your robotic pool cleaner.

Figure 1: OUCAXIA Y50S Robotic Pool Cleaner

2. Important Safety Information

Please read all safety warnings and instructions carefully before operating the appliance. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Always ensure the pool cleaner is fully submerged in water before activation. A minimum water depth of 50cm (20 inches) is required for optimal suction and navigation safety.
• Do not operate the pool cleaner out of water. This can cause damage to the motor and internal components.
• Only use the original charger provided with the appliance. Using an unauthorized charger may cause fire, electric shock, or product damage.
• Keep the charging port dry before charging. Do not charge the pool cleaner near flammable materials.
• Do not allow children to play with the pool cleaner. Supervise children when the appliance is in use.
• Turn off and unplug the pool cleaner before performing any maintenance or cleaning tasks.
• Do not attempt to repair the appliance yourself. Contact authorized service personnel for repairs.

3. Package Contents

Verify that all items are present and in good condition upon opening the package:

• OUCAXIA Y50S Robotic Pool Cleaner (1)
• Retrieval Hook (1)
• Charger (1)
• User Manual (1)
• User Operating Guide (1)

Figure 2: Included items in the OUCAXIA Y50S package.

4. Product Overview

Key Features

• Tangle-Free Cordless Design: Moves freely without cords, ideal for both above-ground and in-ground pools.
• High-Performance Cleaning: Equipped with a 110W brushless motor providing 3120 GPH suction power, effectively picking up debris like twigs, small stones, sand, leaves, and scum.
• 4-in-1 Smart Cleaning Modes: Offers Floor, Wall, Waterline, and All-cover modes to customize cleaning based on pool needs and shapes.
• Superior Wall-Climbing: Dual PVC roller brushes and anti-slip treads allow effortless climbing and cleaning on various pool surfaces (gunite, concrete, fiberglass, vinyl).
• Extended Runtime Battery: 5100mAh battery cleans up to 200㎡ (2153 sq.ft) in a single cycle.
• Intelligent Cleaning Navigation: Uses gyroscopes and ultrasonic sensors for systematic Z-pattern and S-pattern cleaning, ensuring complete coverage and obstacle avoidance.
• 4L Top-Load Filter Basket: Large capacity filter traps fine dust and larger debris, with a top-load design for easy removal and rinsing.
• Self-Parking & Easy Retrieval: Automatically parks near the pool edge when cleaning is complete or battery is low, with a quick water release feature for convenient handling.

Figure 3: Powerful suction of the Y50S.

Figure 4: 1-Click Simple Operation.

Figure 5: Wall-Climbing Scrubbing Roller.

Figure 6: Intelligent Navigation.

Figure 7: Cordless Freedom and Extended Runtime.

Figure 8: Convenient Easy Retrieval.

Figure 9: 4L Large Filter Basket.

Figure 10: Upgraded Motor for efficient debris pickup.

5. Setup

5.1 Initial Charging

Before the first use, fully charge the OUCAXIA Y50S Robotic Pool Cleaner. The charging time is approximately 4 hours for a full charge, providing up to 130 minutes of working time.

1. Ensure the charging port on the cleaner is dry and free of debris.
2. Connect the charger to the charging port on the cleaner.
3. Plug the charger into a power outlet. The indicator lights on the cleaner will show the charging status.
4. Once fully charged, disconnect the charger and securely close the charging port cover.

Figure 11: Charging the pool cleaner.

5.2 First Use

After charging, the cleaner is ready for deployment in your pool.

1. Ensure the pool cleaner is fully charged and the charging port cover is securely closed.
2. Select the desired cleaning mode using the dial on the top of the cleaner (e.g., Floor, Wall, Waterline, All-cover).
3. Gently lower the cleaner into the pool. Ensure it is fully submerged before it begins operation.
4. The cleaner will automatically begin its cleaning cycle based on the selected mode.

6. Operating the Pool Cleaner

6.1 Cleaning Modes

The Y50S offers four distinct cleaning modes to suit various pool cleaning needs:

• Floor Mode: Cleans only the pool floor using an efficient S-pattern.
• Wall Mode: Focuses on cleaning the pool walls, utilizing its strong climbing ability.
• Waterline Mode: Specifically cleans the waterline area, moving up and down to cover a wide range.
• All-Cover Mode: Provides a comprehensive clean of the entire pool, including floor, walls, and waterline.

Figure 12: Four Cleaning Modes.

6.2 Smart Path Navigation

The Y50S employs advanced gyroscopes and ultrasonic sensors to map your pool and execute systematic cleaning paths, minimizing overlap and ensuring no spots are missed. It uses Z-pattern and S-pattern navigation for efficient coverage.

Figure 13: Intelligent Route Planning for Waterline Cleaning.

Figure 14: Floor Cleaning 'S' Pattern.

6.3 Automatic Parking and Retrieval

When the cleaning cycle is complete or the battery is low, the Y50S will automatically park itself near the pool edge for easy retrieval. The quick water release feature ensures convenient handling.

Figure 15: Easy Retrieval and Quick Water Release.

7. Maintenance

7.1 Cleaning the Filter Basket

Regular cleaning of the filter basket is crucial for maintaining optimal cleaning performance.

1. After each cleaning cycle, remove the pool cleaner from the water.
2. Open the top cover of the cleaner to access the 4L large capacity filter basket.
3. Remove the filter basket by lifting its handle.
4. Empty any collected debris from the basket.
5. Rinse the filter basket thoroughly with a garden hose until it is clean.
6. Reinsert the clean filter basket into the cleaner and close the top cover securely.

Figure 16: Cleaning the filter basket.

7.2 Storage

When not in use for an extended period, store the pool cleaner in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the battery is fully charged before storage to prolong its lifespan.

8. Troubleshooting

If you encounter any issues with your OUCAXIA Y50S Robotic Pool Cleaner, refer to the table below for common problems and their solutions.

9. Specifications

10. Warranty and Support

OUCAXIA provides a limited warranty for this product against defects in material and workmanship under normal use. The warranty period begins from the date of purchase. Please retain your proof of purchase for warranty claims.

For detailed warranty terms, technical support, or service inquiries, please contact OUCAXIA customer support through the retailer's platform or visit the official OUCAXIA website. Our dedicated support team is available to assist you with any questions or concerns regarding your robotic pool cleaner.