Fossil Chronograph Men Neutra Grey Quartz Stainless Steel Blue Dial Watch FS6111 User Manual

Introduction

This manual provides instructions for the proper use and care of your Fossil Chronograph Men Neutra Grey Quartz Stainless Steel Blue Dial Watch, model FS6111. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece.

Image: Front view of the Fossil Chronograph Men Neutra Grey Quartz Stainless Steel Blue Dial Watch FS6111.

Product Overview

The Fossil FS6111 is a chronograph watch featuring a precise quartz movement, a durable stainless steel case and band, and a distinctive blue sunray dial. It incorporates three sub-dials for chronograph functions and a date display. The watch is designed for daily wear and offers water resistance suitable for minor water exposure.

Image: Angled view of the Fossil FS6111 watch, showcasing the blue dial and grey stainless steel band.

Setup

Setting the Time

1. Pull the crown (center knob on the right side of the watch) out to position 2.
2. Turn the crown clockwise or counter-clockwise to set the hour and minute hands to the correct time.
3. Push the crown back into position 0 (normal operating position) to start the watch.

Setting the Date

1. Pull the crown out to position 1.
2. Turn the crown clockwise or counter-clockwise to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this may interfere with the date change mechanism.
3. Push the crown back into position 0.

Adjusting the Bracelet

The stainless steel bracelet may require adjustment to fit your wrist comfortably. It is recommended to have this adjustment performed by a qualified jeweler or watch technician to prevent damage to the bracelet or clasp.

Image: Side view of the Fossil FS6111 watch, illustrating the crown and chronograph pushers.

Operating the Chronograph

The chronograph function allows for precise timing of events. Your watch features two pushers located above and below the crown.

1. Start/Stop: Press the upper pusher (A) to start the chronograph. Press it again to stop the timing.
2. Reset: After stopping the chronograph, press the lower pusher (B) to reset all chronograph hands to their zero positions. If the chronograph hands do not reset to zero, refer to the troubleshooting section.

The sub-dials typically display elapsed seconds, minutes, and a 24-hour indicator for the main time.

Image: Close-up side view of the Fossil FS6111 watch, showing the crown and chronograph pushers for operation.

Maintenance

Water Resistance

Your Fossil FS6111 watch has a water resistance rating of 50 meters (5 ATM). This means it is suitable for short periods of recreational swimming, showering, or washing hands. It is not recommended for diving, snorkeling, or high-impact water sports. Ensure the crown is fully pushed in before any contact with water.

Cleaning

To maintain the appearance of your watch:

• Wipe the case and crystal with a soft, damp cloth.
• For the stainless steel bracelet, use a soft brush and mild soapy water to clean, then rinse thoroughly and dry with a soft cloth.
• Avoid using harsh chemicals or abrasive materials.

Battery Replacement

The watch is powered by a quartz movement requiring one LR44 battery. When the battery runs low, the watch may stop or the second hand may skip. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and water resistance.

Troubleshooting

Specifications

Image: Dimensional diagram of the Fossil FS6111 watch.

Warranty and Support

Warranty Information

This Fossil watch comes with a 2-year manufacturer's warranty from the date of purchase. The warranty covers manufacturing defects under normal use. It does not cover damage resulting from improper handling, accidents, unauthorized repairs, or normal wear and tear.

Customer Support

For warranty claims, service, or technical assistance, please contact Fossil India Pvt. Ltd. at the following address:

Please retain your proof of purchase for warranty validation.