Introduction
Thank you for choosing the Fossil Machine Chronograph Watch, model FS6097. This manual provides essential information for the proper setup, operation, and maintenance of your new timepiece. Please read these instructions carefully to ensure optimal performance and longevity of your watch.
Product Overview
The Fossil Machine Chronograph Watch FS6097 features a robust stainless steel case and bracelet, a precise quartz movement, and chronograph functionality. Its design includes a multi-layered dial with three sub-dials and a knurled topring, combining durability with a distinctive aesthetic.
Front view of the Fossil Machine Chronograph Watch, showcasing its black dial and stainless steel bracelet.
Key Features:
- Case & Movement: 44mm case, 22mm band width, scratch-resistant mineral crystal, precise quartz movement with analog display.
- Bracelet: Durable black stainless steel bracelet with removable links for a customized fit.
- Water Resistance: Water resistant up to 50 meters (165 feet) / 5 ATM. Suitable for short periods of recreational swimming and showering, but not for diving or snorkeling.
- Chronograph: Integrated chronograph functionality for precise time measurement.
Setup
Setting the Time:
- Pull the crown (B) out to position 2.
- Turn the crown to set the hour and minute hands to the desired time.
- Push the crown back into position 1 to start the watch.
Side view of the watch, indicating the crown (B) for time adjustment and pushers (A and C) for chronograph control.
Bracelet Adjustment:
The stainless steel bracelet features removable links to achieve a customized fit. It is recommended to have a professional jeweler adjust the bracelet to prevent damage to the watch or bracelet.
A guide illustrating various watch case sizes and thicknesses to help determine the ideal fit for your wrist.
Operating the Chronograph
Your Fossil Machine Chronograph watch is equipped with a stopwatch function, controlled by the pushers located on either side of the crown.
Detailed view of the watch dial, highlighting the chronograph sub-dials for seconds, minutes, and hours.
Chronograph Functions:
- Start/Stop: Press pusher A (top button) to start the chronograph. Press pusher A again to stop it.
- Reset: While the chronograph is stopped, press pusher C (bottom button) to reset all chronograph hands to their zero positions.
Water Resistance:
This watch is water resistant up to 50 meters (5 ATM). This means it is suitable for short periods of recreational swimming and showering. It is not suitable for diving, snorkeling, or high-impact water sports. Always ensure the crown is fully pushed in before any contact with water.
Maintenance
Cleaning Your Watch:
To maintain the appearance of your watch, wipe the case and bracelet with a soft, damp cloth. For stainless steel bracelets, a mild soap solution can be used, followed by rinsing with clean water and thorough drying. Avoid using harsh chemicals or abrasive materials.
Battery Replacement:
The watch uses one LR44 battery. When the watch stops running, it indicates the battery needs replacement. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and water resistance.
Rear view of the watch, showing the stainless steel case back where battery access is located.
Storage:
When not wearing your watch, store it in a cool, dry place away from direct sunlight and extreme temperatures. The original packaging or a watch box can provide suitable protection.
Troubleshooting
- Watch Not Running: If the watch stops, the battery may need replacement. Refer to the 'Battery Replacement' section.
- Chronograph Hands Not Resetting to Zero: If the chronograph hands do not return to their zero position after pressing pusher C, a recalibration may be required. Consult a professional watch technician.
- Water Inside Watch: If moisture appears inside the watch, immediately take it to a professional for inspection and repair to prevent further damage.
Specifications
| Feature | Detail |
|---|---|
| Model Number | FS6097 |
| Case Material | Stainless Steel |
| Case Diameter | 44 millimeters |
| Case Thickness | 11 millimeters |
| Band Material | Stainless Steel |
| Band Width | 22 millimeters |
| Dial Window Material | Mineral |
| Movement | Quartz |
| Water Resistance Depth | 50 Meters (165 Feet) / 5 ATM |
| Battery Type | 1 LR44 (included) |
| Item Weight | 3.53 ounces |
Warranty and Support
Your Fossil Machine Chronograph Watch is covered by a manufacturer's warranty. For specific warranty details, terms, and conditions, please refer to the warranty information provided with your purchase or contact Fossil customer service directly. For technical support or service inquiries, please visit the official Fossil website or contact their customer support channels.
Product Video
Official product video demonstrating various features and the design of the Fossil Machine Chronograph Watch.
