VASAGLE KDC188W01 Dining Chairs User Manual

1. Important Safety Instructions

Please read and understand all instructions before assembling and using this product. Keep this manual for future reference.

• Weight Limit: Each chair is designed to support a maximum weight of 120 kg (264 lbs). Do not exceed this limit.
• Assembly: Ensure all parts are correctly assembled and fasteners are tightened securely before use. Periodically check and re-tighten all connections.
• Stability: Use the adjustable feet to ensure the chair is stable on uneven surfaces. Avoid standing on the chair.
• Children: Keep small parts away from children during assembly. This product is not a toy.
• Placement: Do not place the chairs near open flames or direct heat sources.

2. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Chair Seats (4)
• Chair Backrests (4)
• Leg Frames (4)
• Hardware Pack (screws, washers, Allen key) (1)
• Adjustable Feet (16)

Image Description: An illustration showing all individual components of the VASAGLE KDC188W01 dining chair laid out, including the seat, backrest, metal leg frame, and a small bag of hardware. This image is illustrative and not available for embedding.

3. Assembly Instructions

Assembly is designed to be straightforward and can typically be completed in approximately 5 minutes per chair.

1. Attach Backrest to Seat: Align the backrest with the seat. Secure it using the provided screws and Allen key. Ensure the backrest is firmly attached.
2. Attach Leg Frame: Position the leg frame under the seat. Align the screw holes and attach the leg frame to the seat using the remaining screws. Tighten all screws evenly until secure.
3. Install Adjustable Feet: Screw the adjustable feet into the bottom of each leg. Adjust them as needed to ensure the chair is level and stable on your floor.

Image Description: An illustration demonstrating the first step of assembly, showing how to attach the backrest to the seat with screws. This image is illustrative and not available for embedding.

Image Description: An illustration demonstrating the second step of assembly, showing how to attach the metal leg frame to the underside of the seat. This image is illustrative and not available for embedding.

Image Description: An illustration demonstrating the final step of assembly, showing how to screw in and adjust the leveling feet on the chair legs. This image is illustrative and not available for embedding.

4. Operating and Usage

The VASAGLE KDC188W01 dining chairs are designed for comfortable and stable seating.

• Seating Comfort: The 105-degree reclining backrest provides ergonomic support, suitable for extended periods of sitting.
• Stability: Utilize the adjustable feet to compensate for minor floor irregularities, ensuring the chair remains level and prevents wobbling.
• Movement: When moving the chairs, lift them rather than dragging to prevent damage to the floor or chair legs.

Figure 4.1: Fully assembled VASAGLE KDC188W01 Dining Chair in Cream White.

No official product videos were available in the provided data for embedding.

5. Maintenance and Care

Proper care will extend the life and appearance of your dining chairs.

• Chenille Fabric (Front): For light cleaning, gently vacuum the fabric. For spills, blot immediately with a clean, dry cloth. Avoid rubbing. For stubborn stains, consult a professional upholstery cleaner.
• Glazed Textured PU (Back): The PU surface is waterproof and easy to clean. Simply wipe with a damp cloth and mild soap solution, then dry thoroughly with a clean cloth.
• Metal Frame: Wipe the metal frame with a soft, damp cloth. Avoid abrasive cleaners.
• Regular Checks: Periodically inspect all screws and connections to ensure they remain tight. Re-tighten if necessary.

6. Troubleshooting

If you encounter any issues, refer to the following common problems and solutions.

• Chair Wobbles:
  Solution: Check that all screws are tightened securely. Adjust the leveling feet on the bottom of each leg until the chair is stable on the floor.
• Parts Do Not Align During Assembly:
  Solution: Loosen all screws slightly, realign the parts, and then tighten the screws evenly. Ensure you are using the correct screws for each connection as per the assembly steps.
• Screws Become Loose Over Time:
  Solution: This is normal with furniture use. Periodically check and re-tighten all screws to maintain stability and safety.

7. Specifications

8. Warranty and Support

For warranty information or customer support, please refer to the purchase documentation or contact VASAGLE directly through their official website or the retailer where the product was purchased. Please have your model number (KDC188W01) and proof of purchase ready.