Mojgar Commercial Ice Machine C454968224 User Manual

Introduction

This manual provides detailed instructions for the safe and efficient operation, installation, maintenance, and troubleshooting of your Mojgar Commercial Ice Machine C454968224. Please read this manual thoroughly before using the appliance and retain it for future reference.

Important Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury. Keep this manual for future reference.

• Ensure the appliance is properly grounded.
• Do not operate the machine with a damaged power cord or plug.
• Keep ventilation openings clear of obstructions.
• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
• Only qualified personnel should perform repairs.
• Use only potable water for ice production.

What's in the Box

Your package should contain the following items:

• Commercial Ice Machine
• PP Cotton Filter
• Ice Bucket Drainage Pipe
• Ice Making Drainage Pipe
• Ice Scoop
• Buckle
• Nozzle
• PTFE Tape
• Filter Buckle (x2)
• Pipe A
• Pipe B
• Support Feet (x4)

Image: A visual representation of all the accessories included with the ice maker, such as filters, pipes, scoop, buckles, nozzle, PTFE tape, and support feet.

Setup and Installation

Proper installation is crucial for the optimal performance and longevity of your ice machine. Follow these steps carefully.

Step 1: Install Ice Bucket

1. Unpack and Position: Carefully unpack the ice bucket. Flip it over to access the bottom for feet installation.
   

   Image: The Mojgar Commercial Ice Machine with its ice bucket, showing the overall structure.

2. Install Support Feet: Tighten the four support feet onto the bottom of the ice bucket in sequence. The height of these feet can be adjusted to level the unit.
   

   Image: Close-up of hands installing and adjusting the stainless steel support feet on the ice bucket.

3. Install Drainage Connector: Wrap PTFE tape around the thread of the drainage connector. Screw the connector clockwise into the designated hole on the ice bucket. Attach the ice storage container drainage pipe to this connector, securing it with the fixed buckle.

Step 2: Install Mainframe

1. Position Mainframe: Carefully place the mainframe (ice maker unit) on top of the ice bucket. Ensure it is aligned properly. This step requires at least two people due to the weight and size.
2. Install Filter Buckles and Filter: Install the filter buckles on the back of the mainframe. Insert the PP cotton filter into these buckles.
3. Connect Water Pipes: Insert one end of Pipe A into the filter. Connect Pipe B to the potable water inlet and outlet on the back of the mainframe. Connect the other end of Pipe A to your water source. Ensure all connections are tight to prevent leaks.
   

   Image: A diagram illustrating the three-step easy installation process, including connecting the ice maker to the storage bin, connecting the water supply through the filter, and placing the drain pipe.

4. Initial Wait Time: After installation, please wait 24 hours before turning on the machine to allow the refrigerant to settle.

Operating Instructions

Your Mojgar ice machine features an intuitive control panel for easy operation.

Control Panel Overview

The digital control panel displays various indicators and buttons:

• Power Button: Turns the machine on/off.
• Mode Button: Used for scheduling power-on/off and force releasing ice.
• Clean Button: Initiates the self-cleaning cycle.
• Adjust Thickness Buttons (Up/Down Arrows): Adjusts ice cube thickness.
• Indicators: Timer, Ice Making, Water, Magnetic, High, Clean, Ice Full, Drain, Temp.

Scheduled Power-On

To set a scheduled power-on time:

1. In the "OFF" state, press the "Mode" button to enter the schedule setting.
2. Use the "Up" or "Down" buttons to set the desired power-on time (1-23 hours).
3. Wait 5 seconds for the machine to confirm the schedule.
4. To cancel, press "Mode" or "Power" button.

Auto Cleaning

To initiate the auto-cleaning cycle:

1. In the "OFF" state, press and hold the "Clean" button for 3 seconds.
2. The cleaning cycle lasts 10 minutes.
3. To exit the cleaning process, simply press the "Power" button.

Start Ice Making

To begin ice production:

1. Press the "Power" button. The "Ice Making" indicator light on the screen will illuminate, indicating that the machine is producing ice.
2. An ice making cycle typically completes every 5-15 minutes.

Image: The control panel displaying the timed ice making function, showing settings for automatic stop when full.

Ice Thickness Adjustments

To adjust the thickness of the ice cubes:

1. During the ice making process, press and hold the "Up" button to enter ice thickness adjustment mode.
2. When the screen displays "L-12" (default thickness level), press the "Up" or "Down" button to adjust the thickness of the ice. An adjustable range of 1-30 levels is available.
3. Thinner ice (5-8 minutes) is suitable for seafood. Medium ice (8-11 minutes) is ideal for drinks like coffee or milk. Thick ice (11-15 minutes) is best for cocktails or keeping beverages cold.

Image: The ice machine's control panel showing options for adjusting ice thickness, with examples of different ice cube sizes and their recommended uses.

Scheduled Power-Off

To set a scheduled power-off time:

1. During the ice making process, press and hold the "Mode" button for 3 seconds.
2. Use the "Up" or "Down" buttons to set the desired power-off time (1-23 hours).
3. Wait 5 seconds for the machine to confirm the schedule.
4. To cancel, press "Mode" or "Power" button.

Force Releasing Ice

If you need to manually release ice during the ice making process:

1. During the ice making process, press the "Mode" button to switch to force releasing mode.

Maintenance

Regular maintenance ensures the longevity and hygienic operation of your ice machine.

Self-Cleaning Function

Utilize the built-in self-cleaning mode as described in the "Operating Instructions" section to keep the internal components clean and free from mineral buildup.

Image: A diagram illustrating the double protection for clean ice, featuring a scale inhibitor filter and a self-cleaning function.

Filter Screen Cleaning

Regularly remove and clean the filter screen located on the side of the machine to ensure proper airflow and efficient operation.

Ice Storage Bin Cleaning

The ice storage bin has a drain at the bottom for easy cleaning. If you are not using the machine for an extended period, it is recommended to drain the water and allow the bin to air dry to prevent odors and mold growth.

Image: The ice machine's large storage bin filled with ice, highlighting its 460 LBS capacity and long-lasting insulation.

Troubleshooting

This section addresses common issues you might encounter with your ice machine.

If you encounter issues not listed here or if solutions do not resolve the problem, please contact Mojgar customer support.

Specifications

Warranty and Support

Mojgar stands behind the quality of its products.

• Machine Warranty: 3 years
• Compressor Warranty: 5 years

For customer support, technical assistance, or warranty claims, please refer to the contact information provided with your purchase documentation or visit the official Mojgar website.