HTC HS01-HTC

HTC Neckband Bluetooth Headphones HS01 Grey User Manual

Model: HS01-HTC

Introduction

Thank you for choosing the HTC Neckband Bluetooth Headphones HS01 Grey. These wireless in-ear headphones are designed for comfort, durability, and high-quality audio, featuring Bluetooth 5.3 for stable connections, IPX5 water resistance, and a dedicated game mode with ultra-low latency. This manual provides essential information to help you set up, operate, and maintain your headphones for an optimal listening experience.

HTC Neckband Bluetooth Headphones HS01 Grey

Image: HTC Neckband Bluetooth Headphones HS01 Grey, showcasing the sleek design and neckband.

What's in the Box

  • 1 x HTC Wireless Neckband Earphone
  • 1 x USB-C charging cable
  • 2 Pairs x Rubber eartips (S/L)
  • 1 x User Manual (this document)
Contents of the HTC Neckband Headphones box

Image: The contents of the product packaging, including the headphones, USB-C cable, and extra eartips.

Setup

1. Charging Your Headphones

Before first use, fully charge your HTC Neckband Headphones. Connect the provided USB-C cable to the charging port on the neckband and the other end to a compatible USB power source. A full charge from 0% to 100% typically takes approximately 1.5 hours.

Diagram showing 16 hours battery life and 110 minutes charging time

Image: An illustration highlighting the 16-hour battery life and 110-minute charging time of the headphones.

2. Selecting the Right Eartips

For optimal sound quality and comfort, choose the eartips that best fit your ears. The headphones come with three different sizes (S/M/L). Experiment with each size to find the most secure and comfortable fit.

People wearing HTC Neckband Headphones with different eartip sizes

Image: A couple wearing the headphones, demonstrating the comfortable and secure fit, with an inset showing different eartip sizes (L and S).

3. Bluetooth Pairing

  1. Ensure your headphones are charged and powered on.
  2. Activate Bluetooth on your device (smartphone, tablet, computer).
  3. Search for available Bluetooth devices. The headphones will appear as "HTC HS01".
  4. Select "HTC HS01" to pair. Once connected, you will hear an audio prompt, and the indicator light will confirm the connection.
Diagram showing Bluetooth 5.3 technology chip

Image: An illustration of the internal Bluetooth 5.3 technology chip, emphasizing stable transmission and ultra-low latency.

Operating Your Headphones

Button Functions

The headphones feature intuitive controls located on the neckband. Refer to the diagram below for a detailed overview of each button's function:

Detailed button operation diagram for HTC Neckband Headphones

Image: A detailed diagram illustrating the various button functions on the neckband, including On/Off, Play/Pause, Volume Up/Down, Next/Previous Song, Game Mode, Voice Assistant, and Call controls.

  • Power On/Off: Press and hold the Power button for 3 seconds.
  • Play/Pause: Press the Play/Pause button once.
  • Volume Up: Press the '+' button.
  • Volume Down: Press the '-' button.
  • Next Song: Press and hold the '+' button for 2 seconds.
  • Previous Song: Press and hold the '-' button for 2 seconds.
  • Answer/End Call: Press the Play/Pause button once.
  • Reject Call: Press and hold the Play/Pause button for 3 seconds.
  • Activate Voice Assistant: Press the Play/Pause button twice.

Game Mode (40ms Ultra-Low Latency)

For an enhanced gaming experience, activate the Game Mode. This mode reduces audio latency to 40ms, providing synchronized sound for competitive gaming.

  • To switch to Game Mode: Press and hold the Game Mode button for 2 seconds.
Smartphone displaying 40ms low latency feature for gaming

Image: A smartphone screen showing the '40ms Low Latency' feature, indicating the headphones' suitability for gaming, with an icon to switch to gaming mode.

Man playing a game with HTC Neckband Headphones

Image: A man wearing the headphones while playing a video game, illustrating the low latency game mode.

Hall Magnetic Feature (Auto Pause/Play)

The earbuds are equipped with a magnetic sensor for convenient control of your music playback.

  • Auto Pause: When you bring the backs of the two earplugs together (they will magnetically connect), music playback will automatically pause to conserve power.
  • Auto Play: Separate the earplugs and press the Play button to quickly resume music playback.
Magnetic earbuds with auto pause music feature

Image: A close-up of the magnetic earbuds, showing how they connect to pause music automatically.

Maintenance

IPX5 Waterproof Design

The HTC Neckband Headphones are designed with an IPX5 waterproof rating, making them resistant to sweat and light splashes. This feature makes them suitable for sports and workouts.

  • Cleaning: Wipe the headphones with a soft, dry cloth after use, especially after workouts, to remove sweat and dirt.
  • Storage: Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures.
  • Caution: While IPX5 rated, these headphones are not designed for submersion in water. Avoid exposing them to heavy rain or showering with them.
Man working out with IPX5 waterproof headphones

Image: A man exercising, highlighting the IPX5 waterproof design of the headphones, which protects against sweat and splashes.

Troubleshooting

If you encounter any issues with your HTC Neckband Headphones, please refer to the following common solutions:

  • No Power: Ensure the headphones are fully charged. Connect them to a power source using the USB-C cable.
  • Cannot Pair: Make sure Bluetooth is enabled on your device and the headphones are in pairing mode. Try turning both devices off and on again. Ensure the headphones are not already connected to another device.
  • No Sound/Low Volume: Check the volume levels on both your headphones and the connected device. Ensure the headphones are properly seated in your ears and that the correct eartip size is used for a good seal.
  • Intermittent Connection: Ensure your device is within the Bluetooth range (up to 32.8 ft/10 meters) and there are no significant obstructions between the headphones and your device. Avoid strong electromagnetic interference.
  • Magnetic Pause Not Working: Ensure the earplugs are fully brought together for the magnetic sensor to activate. If they are not aligning correctly, check for any debris.

If the problem persists, please contact customer support for further assistance.

Specifications

Feature Detail
Model Name HS01-HTC
Connectivity Technology Wireless (Bluetooth 5.3)
Bluetooth Range Up to 32.8 feet (10 meters)
Waterproof Rating IPX5
Playtime Up to 16 hours
Charging Time Approx. 1.5 hours (USB-C)
Driver Size 10mm
Noise Control Sound Isolation
Earpiece Shape In Ear
Item Weight 7.8 ounces
Color Grey
Manufacturer HTC
Exploded view of a 10mm headphone driver

Image: An exploded view diagram illustrating the components of a 10mm driver, emphasizing the incredible sound quality.

Official Product Video

Video: An official product video showcasing the features and usage of the HTC Neckband Headphones, including their application in daily life and during workouts.

Warranty and Support

Your HTC Neckband Bluetooth Headphones HS01 Grey come with a 360-day warranty extension, ensuring peace of mind regarding your purchase.

Customer Support

For any questions, concerns, or assistance with your product, please contact our customer support team. We offer 7x24 Live Chat Support to address your needs promptly.

  • Seller: HTC-TECH
  • Support: Refer to your purchase platform or product packaging for direct contact methods for 7x24 Live Chat Support.

We are committed to your satisfaction with our in-ear headphones.

Related Documents - HS01-HTC

Preview HTC True Wireless Headset Basic (HS01) Quick Start Guide
Concise guide to setting up and using the HTC True Wireless Headset Basic (Model HS01), including pairing, controls, LED notifications, and technical specifications.
Preview HTC Wireless Earphones 40 (NE40) User Manual and Guide
Official user manual for HTC Wireless Earphones 40 (NE40). Learn about product specifications, pairing, controls, AI translation, safety instructions, and more.
Preview HTC NE11 Wireless Earphones User Manual
Comprehensive user manual for HTC NE11 wireless earphones, covering components, pairing, power management, Bluetooth connection, basic operations for music and calls, resetting, case display functions, and FCC compliance.
Preview HTC NE20 Wireless Earphones 20 Quick Start Guide
Get started with your HTC NE20 Wireless Earphones 20. This guide covers product specifications, what's in the box, components, pairing, setup, basic operations, music playback, TikTok controls, camera control, voice assistant, mini games, display settings, safety instructions, and legal information.
Preview HTC NE11 Wireless Earphones - Quick Start Guide and User Manual
Comprehensive guide for HTC NE11 Wireless Earphones, covering setup, features, operations, and safety instructions for these Bluetooth AI translator earbuds with an LCD screen.
Preview HTC NE35 Earphones User Manual & Operations Guide
User manual for HTC NE35 Bluetooth earphones, covering components, pairing, power operations, basic functions, and reset procedures. Features AI translation and FCC compliance information.