Leebein Electric Spin Scrubber (Model YMG-825) Instruction Manual

1. Introduction

Thank you for choosing the Leebein Electric Spin Scrubber, Model YMG-825. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new cleaning device. Please read this manual thoroughly before first use and retain it for future reference.

Safety Information

• Always ensure the device is turned off before attaching or detaching brush heads, or when not in use.
• Keep the device away from children and pets.
• Do not immerse the charging port in water. The main body is IPX7 waterproof, but the charging port must be dry before charging.
• Use only the provided charging cable and adapter.
• Do not attempt to repair or modify the device yourself. Contact customer support for assistance.

2. Package Contents

Verify that all items listed below are included in your package:

• Leebein Electric Spin Scrubber Main Unit
• Extendable Handle
• Large Flat Brush Head
• Small Flat Brush Head
• Corner Brush Head
• Cloth Brush Head
• Sponge Brush Head
• Scouring Pad Brush Head
• Faux Fur Brush Head
• USB Charging Cable
• User Manual

3. Setup

3.1 Initial Charging

Before first use, fully charge the electric spin scrubber. Connect the USB charging cable to the charging port on the device and plug the other end into a suitable USB power adapter (not included). The battery indicator on the device will show charging status. A full charge typically takes approximately 3 hours and provides up to 90 minutes of runtime.

3.2 Assembling the Scrubber

1. Attach the Extendable Handle (Optional): Align the extendable handle with the main unit and twist clockwise until it clicks securely into place. To detach, twist counter-clockwise.
2. Attach a Brush Head: Select the appropriate brush head for your cleaning task. Align the brush head with the rotating shaft on the main unit and push firmly until it locks into place. Ensure it is securely attached before operation.

4. Operating Instructions

4.1 Power On/Off and Speed Settings

Press the power button to turn the scrubber on. The device features two speed settings:

• P1 (High Speed): Suitable for heavy-duty cleaning tasks and stubborn stains.
• P2 (Low Speed): Ideal for general cleaning and reducing splashing on delicate surfaces.

Press the power button again to cycle between P1 and P2. Press and hold the power button to turn the device off.

4.2 Adjusting Handle Length

The stainless-steel handle can be adjusted from 12 to 50 inches, allowing you to reach high or low areas without bending or kneeling. Simply twist the handle sections to extend or retract, then twist to lock in place.

4.3 Using Different Brush Heads

The Leebein Electric Spin Scrubber comes with 7 versatile brush heads designed for various cleaning tasks:

• Large Flat Brush: Ideal for large flat surfaces like floors, tiles, and shower walls.
• Small Flat Brush: Suitable for smaller flat areas, sinks, and countertops.
• Corner Brush: Designed to clean corners, grout lines, and tight spaces.
• Cloth Brush: Gentle cleaning for delicate surfaces.
• Sponge Brush: For polishing and light scrubbing.
• Scouring Pad Brush: For tougher stains on durable surfaces.
• Faux Fur Brush: For specific applications like car interiors or upholstery.

4.4 IPX7 Waterproof Feature

The Leebein Electric Spin Scrubber is IPX7 waterproof, meaning the entire unit can be submerged in water up to 1 meter for 30 minutes. This allows for thorough cleaning of the device itself and safe use in wet environments like showers and bathtubs. Ensure the charging port cover is securely closed before exposing the device to water.

5. Maintenance and Care

5.1 Cleaning the Device and Brush Heads

• After each use, detach the brush head and rinse it thoroughly under running water to remove any cleaning solution or debris.
• The main unit can also be rinsed under water due to its IPX7 waterproof rating. Ensure the charging port cover is sealed.
• For squished bristles, immerse the brush head in boiling water for a few minutes to help restore their shape.
• Wipe the main unit and handle with a clean, damp cloth. Do not use abrasive cleaners or solvents.

5.2 Storage

Store the electric spin scrubber and its accessories in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the device is fully charged before long-term storage to maintain battery health.

6. Troubleshooting

• Device does not turn on: Ensure the battery is charged. If the battery is low, charge the device for at least 3 hours.
• Brush head stops spinning or slows down: This may indicate low battery or excessive pressure being applied. Charge the device or reduce pressure during cleaning.
• Brush head detaches during use: Ensure the brush head is securely attached by pushing it firmly onto the rotating shaft until it clicks.
• Reduced cleaning performance: The brush heads may be worn out. Replace them with new ones for optimal performance.

If you encounter issues not covered here, please contact Leebein customer support.

7. Specifications

8. Warranty and Support

Leebein offers a 2-year quality assurance for this product. If you have any questions, concerns, or require technical assistance, please contact Leebein customer support. Refer to your purchase documentation for specific contact details or visit the official Leebein website.