AOOSTAR GEM10 AMD Ryzen 7 6800H Mini PC User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your AOOSTAR GEM10 Mini PC. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

The AOOSTAR GEM10 is a compact mini PC powered by an AMD Ryzen 7 6800H processor, featuring AMD Radeon 680M graphics, LPDDR5 6400MHz RAM, and multiple M.2 NVME slots. It also includes an OCULINK port and dual 2.5G LAN ports for versatile connectivity and performance.

2. Package Contents

Verify that all items are present in the package:

• 1 x AOOSTAR GEM10 Mini PC (AMD Ryzen 7 6800H)
• 1 x Power Supply
• 1 x VESA Mount
• 1 x User Manual (this document)
• 1 x Mounting Screws set
• 1 x HDMI Cable
• 2 x SSD Cooling Pads

3. Product Overview

The AOOSTAR GEM10 Mini PC is designed for high performance in a compact form factor. Below are key features and port layouts.

3.1 Front and Rear Panel Layout

Image: Front and Rear Panel Ports of AOOSTAR GEM10 Mini PC. The front panel includes a reset button, audio jack, microphone jack, two USB 3.2 Gen2 ports, an OCULINK port, and a USB4 port. The rear panel features a DC power input, two 2.5G LAN ports, two HDMI 2.1 ports, two USB 3.2 Gen2 ports, and a DisplayPort 1.4.

Front Panel:

• Reset Button: For system reset.
• Audio Jack: For headphones or speakers.
• Microphone Jack: For microphone input.
• USB 3.2 Gen2 Ports (x2): High-speed data transfer.
• OCULINK Port: High-bandwidth (64 Gbps) port for external GPUs. Note: Turn off the computer before plugging in or unplugging devices from the OCULINK port to prevent motherboard damage.
• USB4 Port: High-speed data transfer and display output (up to 8K).

Rear Panel:

• DC Power Input: Connect the provided power adapter.
• 2.5G LAN Ports (x2): Dual 2.5 Gigabit Ethernet ports for high-speed wired network connections.
• HDMI 2.1 Ports (x2): For connecting displays, supporting 4K@120Hz.
• USB 3.2 Gen2 Ports (x2): High-speed data transfer.
• DisplayPort 1.4: For connecting displays, supporting 4K@120Hz.

3.2 Key Features

Image: Infographic highlighting key features including AMD Ryzen 7 6800H, LPDDR5 6400MHz, OCULink, 0.6L aluminum case, 3 NVME channels, Intel 2.5G x2 LAN, adjustable BIOS (28W/35W/45W), HD 2.1, USB4 PD, DP 1.4.

• Processor: AMD Ryzen 7 6800H (8 Cores/16 Threads, up to 4.70GHz) with "Zen 3" Architecture.
• Graphics: Integrated AMD Radeon 680M (12 Cores, 2200 MHz).
• RAM: 32GB LPDDR5 6400MHz (soldered).
• Storage: 3 x M.2 2280 NVME Slots (PCIe 4.0 x4) for flexible storage configurations (RAID 0/1/5 supported).
• Connectivity: Dual 2.5Gbps LAN, WiFi 6, Bluetooth 5.2.
• Display Output: Supports triple 4K@120Hz displays via Dual HDMI 2.1 and USB4/DisplayPort 1.4.
• OCULINK Port: Dedicated 64 Gbps port for external GPU connections with minimal performance loss.
• Adjustable BIOS TDP: 28W/35W/45W settings for power management.
• Cooling System: "Valley 2.0" cooling system with dual fans for efficient heat dissipation and quiet operation.

4. Setup Instructions

4.1 Initial Connection

1. Connect to Display: Use the provided HDMI cable to connect the Mini PC to a monitor or TV. You can also use the DisplayPort or USB4 port for additional displays.
2. Connect Peripherals: Plug in your USB keyboard and mouse into the available USB ports.
3. Connect to Network: For a wired connection, connect an Ethernet cable to one of the 2.5G LAN ports. For wireless, ensure your WiFi network is available during initial setup.
4. Connect Power: Connect the power adapter to the DC power input on the rear panel, then plug the adapter into a power outlet.
5. Power On: Press the power button on the front of the Mini PC.

4.2 Installing/Upgrading Storage (M.2 NVME SSDs)

The GEM10 supports up to three M.2 2280 NVME PCIe 4.0 x4 SSDs. This model is shipped without an SSD, requiring user installation. Follow these steps to install or upgrade storage:

Image: Internal view of the AOOSTAR GEM10 Mini PC, showing the three M.2 NVME slots for storage expansion. The image highlights the ease of access for installing SSDs.

1. Power Off and Disconnect: Ensure the Mini PC is completely powered off and disconnected from the power supply.
2. Open the Chassis: Carefully open the Mini PC chassis. Refer to the product diagram or specific instructions for your model on how to access the internal components.
3. Insert M.2 SSD: Locate the M.2 slots. Gently insert the M.2 NVME SSD into an available slot at an angle, then push it down and secure it with the provided screw.
4. Apply Cooling Pad: If installing a new SSD, place one of the provided SSD cooling pads on top of the installed SSD for optimal thermal performance.
5. Close Chassis: Carefully close and secure the Mini PC chassis.
6. Initialize SSD (if new): After powering on, you will need to initialize and format the new SSD in your operating system's Disk Management utility before it can be used.

The three NVME drives can be configured in RAID 0, RAID 1, or RAID 5 for enhanced performance or data redundancy. Consult your operating system's documentation for RAID setup procedures.

Image: Diagram illustrating the three PCIe 4.0 x4 M.2 NVME SSD slots, emphasizing their high-speed capabilities for storage expansion.

5. Operating Instructions

5.1 Power On/Off

• Power On: Press the power button on the front panel.
• Power Off: Use the operating system's shutdown function. Alternatively, press and hold the power button for 5 seconds for a forced shutdown (use only when necessary).

5.2 BIOS Settings

To access the BIOS settings, press the DEL key repeatedly during startup. The BIOS allows configuration of various system parameters, including the adjustable TDP (Thermal Design Power) for the CPU.

• Adjustable TDP: The GEM10 offers three TDP settings: 28W, 35W (default), and 45W. Higher TDP settings may provide increased performance but can also lead to higher power consumption and heat generation. Adjust according to your performance and thermal requirements.

5.3 Connecting External Devices

• USB Devices: Connect USB peripherals such as external hard drives, printers, or webcams to the available USB 3.2 Gen2 or USB4 ports.
• OCULINK External GPU: For connecting an external graphics card via the OCULINK port, ensure the Mini PC is powered off before connecting or disconnecting the eGPU enclosure. This port provides a high-bandwidth connection for demanding graphical tasks.
• Multiple Displays: The Mini PC supports up to three displays simultaneously using the HDMI 2.1 ports, DisplayPort 1.4, and USB4 port.

Image: The AOOSTAR GEM10 Mini PC connected to a central monitor and two side monitors, demonstrating its triple-screen display capability for enhanced productivity.

Image: The AOOSTAR GEM10 Mini PC highlighting the OCULINK and USB4 ports, indicating their high-speed data transfer capabilities for connecting external devices like graphics cards or high-speed storage.

6. Maintenance

6.1 Cleaning

• Exterior: Use a soft, dry cloth to wipe the exterior of the Mini PC. Avoid liquid cleaners.
• Ventilation: Periodically check the ventilation grilles for dust accumulation. Use compressed air to gently clear dust from the vents to ensure proper airflow and cooling.

6.2 Software Updates

Regularly update your operating system, drivers, and BIOS to ensure optimal performance, security, and compatibility. Check the AOOSTAR official website for the latest driver and BIOS updates for the GEM10 model.

7. Troubleshooting

8. Specifications

9. Warranty and Support

AOOSTAR provides a 12-month worry-free warranty and lifetime technical service for the GEM10 Mini PC.

For technical assistance, troubleshooting, or warranty claims, please contact AOOSTAR customer support. Refer to the contact information provided with your purchase or visit the official AOOSTAR website.

The product has passed CE, EMC, FCC, and RoHS Certifications, ensuring compliance with relevant safety and environmental standards.

10. Additional Information

10.1 VESA Mount Installation

The included VESA mount allows you to attach the Mini PC to the back of a compatible monitor, saving desk space. Use the provided mounting screws to secure the VESA mount to your monitor and then attach the Mini PC to the mount.

Image: The AOOSTAR GEM10 Mini PC shown mounted on the rear of a computer monitor using the included VESA mount, illustrating how it saves desktop space.

10.2 Cooling System

The GEM10 features a "Valley 2.0" cooling system with dual fans designed for efficient heat dissipation and quiet operation. This system includes a CPU cooler and a hard drive cooler to maintain optimal temperatures for all components, especially the SSDs.

Image: An exploded view of the AOOSTAR GEM10 Mini PC, illustrating the internal components and the dual cooling fan design for effective heat management.

Image: A graph showing the noise levels of the AOOSTAR GEM10 Mini PC at various TDP settings (28W, 35W, 45W), indicating its quiet operation.