VINGLI 26-Inch Swivel Barstools (Set of 3) Instruction Manual

Introduction

Thank you for choosing the VINGLI 26-inch Swivel Barstools. This manual provides essential information for the safe assembly, operation, and maintenance of your new barstools. Please read these instructions carefully before assembly and retain them for future reference.

Safety Information

WARNING:

• Avoid overloading the stool. The maximum weight capacity is 300 lbs.
• Use the barstool only on stable, even surfaces to prevent tipping.
• Do not leave children unattended while using the stool.
• Ensure all screws and bolts are securely tightened before use and periodically check for tightness.

Package Contents

Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Seat with Backrest (3 units)
• Metal Leg Frame (3 units)
• Footrest Bar (3 units)
• Assembly Hardware (screws, washers, Allen wrench)
• Adjustable Foot Pads (pre-installed or separate)

Image: Three VINGLI swivel barstools, illustrating the complete product.

Assembly Instructions

Assembly is required and typically takes approximately 15 minutes per stool. An Allen wrench is included for your convenience. It is recommended to assemble the stools on a soft, clean surface to prevent scratching.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a protected surface.
2. Attach Leg Frame to Seat: Align the metal leg frame with the pre-drilled holes on the underside of the seat. Secure using the provided screws and washers. Do not fully tighten screws until all are in place.
3. Install Footrest Bar: Attach the footrest bar to the designated points on the leg frame. Ensure it is oriented correctly for comfortable foot placement. Secure with screws.
4. Tighten All Hardware: Once all components are loosely assembled, gradually tighten all screws and bolts until secure. Do not overtighten.
5. Adjust Foot Pads: If necessary, adjust the foot pads at the bottom of the legs to ensure the stool is stable and level on your floor.

Image: Product dimensions and recommended counter height for optimal fit.

Image: Detailed view of the thick PU leather cushion, sturdy metal legs, and adjustable foot pads.

Operating Instructions

• Swivel Function: The barstool features a 360-degree smooth swivel mechanism. To rotate, simply apply gentle pressure to the seat in the desired direction.
• Seating: Sit centrally on the seat for optimal balance and comfort. Utilize the footrest bar for added support.
• Stability: Ensure the adjustable foot pads are properly set to prevent wobbling. Adjust them by twisting clockwise or counter-clockwise until the stool is stable and level on your floor surface.

Image: Illustration of the 360-degree swivel feature and key benefits like weight capacity.

Maintenance

• Cleaning: Wipe clean the PU faux leather and metal legs with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
• Regular Inspection: Periodically check all screws and bolts to ensure they remain tight. Retighten as necessary to maintain stability and safety.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause the faux leather to fade or crack over time.
• Weight Limit: Adhere to the maximum weight capacity of 300 lbs to prevent damage to the stool and potential injury.

Troubleshooting

Specifications

Customer Support

For any questions, missing parts, or assistance with your VINGLI barstools, please contact VINGLI customer support through the retailer where the product was purchased. Please have your model number (G52006403+G52006404) and purchase date available.

Information regarding protection plans may be available from your retailer at the time of purchase.