1. Introduction
This manual provides instructions for the installation, usage, and maintenance of your BoxWave ClearTouch Crystal ToughShield 9H Screen Protector, designed specifically for the DIGITNOW JUM-FS14MP (2.4 in) device. This screen protector is engineered to offer robust protection against scratches and impacts while maintaining optical clarity and touch sensitivity.
2. Package Contents
Verify that all items are present in your package:
- Two (2) BoxWave ClearTouch Crystal ToughShield 9H Screen Protectors
- Installation Accessories (e.g., cleaning cloth, dust removal sticker, squeegee)
Image: The retail packaging showing two screen protectors and included installation accessories like a cleaning cloth and applicator card.
3. Installation Guide
Follow these steps carefully for optimal screen protector application. Ensure you are in a dust-free environment.
- Clean the Device Screen: Use the provided cleaning cloth to thoroughly clean the DIGITNOW JUM-FS14MP screen. Ensure all dust, fingerprints, and smudges are removed. For stubborn particles, use a dust removal sticker if included.
Image: Illustration of cleaning the device screen to remove dust and debris before application.
- Prepare the Screen Protector: Identify the protective layers on the screen protector. Typically, there are two layers: one marked "1" (back liner) and one marked "2" (front liner). Carefully peel back a small portion of the back liner (labeled "1") from one end of the screen protector.
Image: Illustration showing the initial peeling of the protective back liner from the screen protector.
- Align the Protector: Carefully align the exposed adhesive edge of the screen protector with the edge of your device's screen. Pay close attention to cutouts for cameras or sensors to ensure proper alignment.
Image: Illustration demonstrating the precise alignment of the screen protector with the device's display.
- Apply the Protector: Once aligned, slowly lower the screen protector onto the device screen while gradually peeling off the remaining back liner. Use the provided squeegee or a soft card to gently press down and smooth the protector from the aligned edge towards the opposite end, pushing out any air bubbles.
Image: Illustration showing the application process, using a tool to smooth the protector onto the screen.
- Remove Air Bubbles: If air bubbles remain, use the squeegee to gently push them towards the nearest edge of the screen protector. For small, persistent bubbles, you may lift a corner of the protector slightly and reapply, smoothing it down again.
Image: Illustration depicting the technique for removing air bubbles from under the applied screen protector.
- Remove Front Liner: Once the screen protector is fully applied and free of major bubbles, carefully peel off the top protective layer (labeled "2").
Image: Illustration showing the final step of removing the top protective film to reveal the installed screen protector.
- Final Inspection: Perform a final check for any remaining dust or bubbles. Small bubbles may disappear over 24-48 hours.
Image: A visual representation of the screen protector successfully installed on a device, showcasing its clarity.
4. Usage and Care
The ClearTouch Crystal ToughShield 9H is designed for daily use, offering protection without hindering touch functionality or display clarity.
- Scratch Resistance: The 9H hardness rating provides significant resistance against scratches from everyday objects like keys and coins.
- Impact Resistance: While highly protective, the film is flexible and designed to absorb impacts without shattering like glass.
- Clarity: Enjoy 99% visual transparency, ensuring your device's display remains vibrant and clear.
Image: An illustration demonstrating the screen protector's scratch-resistant properties against sharp objects.
Image: A visual comparison highlighting the screen protector's strong and impact-resistant nature, contrasting with a shattered glass screen.
5. Maintenance
To maintain the clarity and effectiveness of your screen protector:
- Cleaning: Use a soft, lint-free cloth (like the one provided) to gently wipe the screen protector. For smudges, slightly dampen the cloth with water or a screen-safe cleaner. Avoid harsh chemicals or abrasive materials.
- Avoid Sharp Objects: While resistant, extreme pressure or very sharp objects can still damage the protector.
6. Troubleshooting
Common issues and their solutions:
- Bubbles After Installation:
- Small bubbles often disappear within 24-48 hours as the adhesive settles.
- For larger bubbles, gently lift the nearest edge of the protector with a fingernail or card, then slowly reapply, pushing the bubble out with the squeegee.
- Dust Under the Protector:
- This usually occurs during installation. Carefully lift the nearest corner of the protector. Use a dust removal sticker or a piece of tape to gently dab the dust particle off both the screen and the adhesive side of the protector. Reapply slowly.
- Misalignment:
- If the protector is significantly misaligned, gently peel it off entirely. Clean both the device screen and the protector's adhesive side (if possible, with distilled water and a lint-free cloth, then air dry) and attempt reinstallation. The ClearTouch material is designed for reusability.
7. Specifications
| Brand | BoxWave |
| Model | ClearTouch Crystal ToughShield 9H |
| Material | Polyethylene Terephthalate (PET) |
| Hardness Rating | 9H |
| Transparency | 99% |
| Screen Surface | Glossy |
| Compatibility | DIGITNOW JUM-FS14MP (2.4 in) |
| Item Weight | 0.7 ounces |
8. Warranty Information
Specific warranty details for this product are not provided in the available information. Please refer to the BoxWave official website or contact their customer support for detailed warranty terms and conditions.
9. Support
For further assistance, technical support, or inquiries regarding your BoxWave ClearTouch Crystal ToughShield 9H Screen Protector, please visit the official BoxWave website or contact their customer service department.
Website: www.boxwave.com
