Generic All in One Wooden Speaker Instruction Manual

Introduction

This manual provides detailed instructions for the safe and efficient use of your Generic All in One Wooden Speaker. Please read this manual thoroughly before operating the device and retain it for future reference. This speaker combines Bluetooth connectivity, FM radio, AUX input, and USB/TF card playback in a compact, wooden design.

Safety Information

• Do not expose the speaker to water, moisture, or extreme temperatures.
• Avoid dropping or subjecting the speaker to strong impacts.
• Do not attempt to disassemble or repair the speaker yourself. Contact qualified service personnel.
• Keep the speaker away from heat sources and direct sunlight.
• Use only the specified charging voltage (5V DC) to prevent damage.
• Keep out of reach of children.

Package Contents

Please check the package for the following items:

• Generic All in One Wooden Speaker
• Quick Start Guide
• USB Charging Cable (assumed)

Product Overview

Familiarize yourself with the speaker's controls and ports:

Image: Front view of the speaker, showing the control panel with inputs for MIC, TF card, AUX, USB, DC5V charging, and buttons for IR, volume/track control, play/pause, mode selection, and the ON/OFF switch. Icons for Microphone, FM Radio, Bluetooth, USB, 5V DC charging, 2000mAh Li-ion battery, and 10W Speaker are also displayed.

Control Panel Features:

• MIC Input: For connecting an external microphone.
• TF Card Slot: For playing audio from a MicroSD card.
• AUX Input: For connecting external audio devices via a 3.5mm cable.
• DC5V Port: For charging the speaker using a 5V DC power source.
• IR Receiver: For remote control (if applicable, remote not included in box contents).
• USB Port: For playing audio from a USB flash drive.
• Previous/Volume Down Button: Short press for previous track, long press for volume down.
• Play/Pause Button: To play or pause audio playback.
• Next/Volume Up Button: Short press for next track, long press for volume up.
• MODE Button: To switch between Bluetooth, AUX, and Radio modes.
• OFF/ON Switch: Power switch for the speaker.
• FM Antenna: Extend for better radio reception.

Setup

1. Charging the Speaker

1. Connect the USB charging cable to the DC5V port on the speaker.
2. Connect the other end of the USB cable to a 5V DC power adapter (not included) or a computer USB port.
3. Allow the speaker to charge fully before first use. The charging indicator (if present) will typically turn off or change color when charging is complete.

2. Powering On/Off

• To power on, slide the OFF/ON switch to the 'ON' position.
• To power off, slide the OFF/ON switch to the 'OFF' position.

Operating Instructions

1. Bluetooth Mode

1. Power on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing LED light and an audible prompt.
2. On your mobile device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
3. Select "All In One Wooden Speaker" (or similar name) from the list of devices.
4. Once paired, the speaker will indicate a successful connection, and the LED light will stop flashing.
5. You can now play audio from your device through the speaker.
6. Use the speaker's Previous/Volume Down, Play/Pause, and Next/Volume Up buttons to control playback, or control directly from your device.

2. AUX Mode

1. Connect one end of a 3.5mm audio cable (not included) to the AUX input port on the speaker.
2. Connect the other end of the cable to the audio output jack of your external device (e.g., MP3 player, computer).
3. Press the MODE button on the speaker until it enters AUX mode.
4. Play audio from your external device. Volume can be adjusted on both the speaker and the external device.

3. FM Radio Mode

1. Extend the FM antenna for better reception.
2. Press the MODE button until the speaker enters FM Radio mode.
3. To auto-scan and save available stations, press and hold the Play/Pause button. The speaker will scan and store stations automatically.
4. Use the Previous/Volume Down and Next/Volume Up buttons to navigate between saved stations.

4. USB/TF Card Playback

1. Insert a USB flash drive or a TF (MicroSD) card into the respective port on the speaker.
2. The speaker will automatically detect the storage device and begin playing audio files. If not, press the MODE button to switch to USB or TF card mode.
3. Use the Previous/Volume Down, Play/Pause, and Next/Volume Up buttons to control playback.

5. Microphone Use

• Connect a compatible microphone (not included) to the MIC Input port.
• The speaker will amplify the microphone input. Adjust volume as needed.

Maintenance

• Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Store the speaker in a cool, dry place when not in use.
• Charge the battery regularly, even if not using the speaker for extended periods, to maintain battery health.

Troubleshooting

Specifications

Image: Dimensions of the speaker, showing a height of 16cm, a width of 13cm, and a depth of 5.5cm.

Warranty Information

This product does not come with a manufacturer's warranty. Please refer to your retailer's return policy for any issues.

Support

For any queries or assistance, please contact:

Manufacturer: Electro Electrified

Email: support@electroelectrified.com