HeaBoom F2

HeaBoom F2 Portable Evaporative Air Cooler User Manual

Model: F2 | Brand: HeaBoom

1. Introduction

Welcome to your new HeaBoom F2 Portable Evaporative Air Cooler. This manual provides essential information for safe and efficient operation, maintenance, and troubleshooting. Please read it thoroughly before using the product to ensure proper functionality and longevity.

2. Important Safety Information

WARNING:

  • This device is non-rechargeable and must remain plugged into a power source to function.
  • If there are slight water stains in the water tank, it is considered normal. To ensure the proper functioning of the spray feature, a spray test is conducted during quality inspection.
  • For optimal misting, use pure water or mineral water in the water tank.
  • This product is a personal evaporative cooler, not a traditional air conditioner. It provides localized cooling and humidification and cannot cool an entire room.
  • If the mist function is not working, ensure the water tank is not empty. Also, check and wipe the mist outlet to prevent blockages.
  • Do not immerse the unit in water or other liquids.
  • Keep out of reach of children and pets.
  • Unplug the unit before cleaning or when not in use for extended periods.

3. Package Contents

Verify that all items are included in your package:

  • HeaBoom F2 Portable Evaporative Air Cooler (x1)
  • Type-C USB Cable (x1)
  • User Manual (x1)
  • Exquisite Gift Box (x1)

4. Product Overview

Familiarize yourself with the components and features of your HeaBoom F2 cooler.

HeaBoom F2 Portable Evaporative Air Cooler with USB-C cable and ice cubes, showing cool air flow.

Front view of the HeaBoom F2 Portable Evaporative Air Cooler, highlighting its compact design and the included USB-C power cable.

HeaBoom F2 Portable Air Cooler highlighting its 4-in-1 functions: Humidifier, Night Light, Desk Fan, Air Cooler.

An image depicting the four primary functions of the HeaBoom F2: humidification, night light, fan, and air cooling.

HeaBoom F2 with a close-up on its touch screen control panel.

Close-up view of the intuitive touch screen control panel.

5. Setup

Follow these steps for initial setup:

  1. Unpacking: Carefully remove all components from the packaging.
  2. Placement: Place the unit on a flat, stable surface. Ensure there is adequate space around the unit for proper airflow.
  3. Power Connection: Connect the Type-C cable to the unit and then to a suitable power source (e.g., adapter, PC, power bank, car charger). Note: This device is non-rechargeable and must remain plugged in to function.
    HeaBoom F2 powered by power bank, USB, and car charger, showing versatility.

    The cooler can be powered by various USB sources for flexible use.

  4. Filling the Water Tank:
    • Open the water tank cover on top of the unit.
    • Fill the 600ML water tank with clean water. For optimal misting, use pure water or mineral water.
    • Optionally, add ice cubes to the water tank for an enhanced cooling effect.
    • Close the water tank cover securely.
    Top view of the HeaBoom F2 showing the large 600ml water tank for adding water and ice cubes.

    The 600ml water tank is easily accessible for filling with water and ice.

6. Operating Instructions

The HeaBoom F2 features a touch screen control panel for easy operation.

Close-up of the HeaBoom F2 control panel with touch buttons for timer, LED lights, mist, fan speed, and power.

Detailed view of the touch control panel located on the top of the unit, indicating various function buttons.

Power On/Off

Touch the power button (indicated by a circle with a vertical line) to turn the unit on or off.

Adjusting Fan Speed

The unit has 4 wind speeds. Touch the fan speed button (indicated by fan blades) to cycle through speeds I, II, III, and IV. Note: When all three indicators light up, it signifies Speed IV.

Natural Wind Mode: Touch the natural wind button (indicated by wavy lines) to activate natural wind mode, which automatically circulates between Speed I and IV.

HeaBoom F2 showing internal fan and airflow, indicating 4 wind speeds with cool mist.

A cutaway view illustrating the internal fan mechanism and airflow, emphasizing the four adjustable wind speeds and mist function.

Mist Function (Humidifier)

Touch the water droplet button to activate or deactivate the atomizing (mist) function. This provides continuous cooling and humidification.

LED Night Light

Touch the light bulb button to cycle through the 7 available LED color modes. This feature can be used to create ambient lighting.

HeaBoom F2 displaying its 7-color LED light feature.

The cooler showcasing its full spectrum of 7 LED color options.

Timer Settings

Touch the timer button (indicated by a clock) to set the automatic shut-off timer for 2, 4, or 6 hours.

HeaBoom F2 showing timer settings for 2H, 4H, 6H.

The timer function allows setting the device to operate for 2, 4, or 6 hours.

Adjusting Airflow Direction

Manually adjust the up-down direction of the front louvers within a 60° range to direct the airflow as desired.

HeaBoom F2 showing adjustable louvers for 60-degree airflow direction.

The front louvers can be manually adjusted to direct airflow up or down within a 60-degree range.

7. Maintenance

Regular cleaning and proper care will ensure the longevity and optimal performance of your HeaBoom F2 cooler.

  • Water Tank Cleaning: Regularly drain and clean the water tank to prevent mineral buildup, mold, or mildew. Use a soft brush and mild soap if necessary, then rinse thoroughly.
  • Mist Outlet: If the mist function is not working, ensure the mist outlet is clear of any obstructions. Gently wipe it with a soft cloth.
  • Exterior Cleaning: Wipe the exterior surfaces of the unit with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
  • Storage: When not in use for extended periods, ensure the water tank is completely empty and dry. Clean the unit thoroughly and store it in a cool, dry place away from direct sunlight.
HeaBoom F2 showing a leak-proof design for the water tank.

The unit features a leak-proof design to minimize spills during use and maintenance.

8. Troubleshooting

Refer to the table below for common issues and their solutions.

ProblemPossible CauseSolution
Unit does not power on.Not plugged in; Power source issue.Ensure the Type-C cable is securely connected to a working power source.
No mist/spray.Water tank empty; Mist outlet blocked; Incorrect water type.Refill water tank with pure or mineral water. Clean the mist outlet.
Weak airflow.Fan speed too low; Obstruction.Increase fan speed. Ensure air intake/outlet are not blocked.
Unit is not cooling effectively.This is an evaporative cooler, not an AC; No ice in tank.Add ice cubes to the water tank for enhanced cooling. Understand that it provides personal cooling, not room cooling.
LED lights not working.Light function off.Press the light bulb button to activate or cycle through colors.

9. Specifications

Technical details of the HeaBoom F2 Portable Evaporative Air Cooler:

  • Model Name: F2
  • Brand: HeaBoom
  • Mounting Type: Freestanding
  • Controls Type: Touch
  • Reservoir Capacity: 600 Milliliters
  • Air Flow Capacity: 350 Microliters Per Minute
  • Noise Level: 45 Decibels
  • Product Dimensions: 1.36"D x 0.89"W x 0.68"H
  • Item Weight: 2.22 pounds
  • Power Source: Must be plugged in (non-rechargeable)
  • Timers: 2H, 4H, 6H
  • Fan Speeds: 4 (including Natural Wind mode)
  • LED Lights: 7 Colors
HeaBoom F2 Portable Air Cooler with dimensions labeled: 9.2 inches height, 5.9 inches width, 4.3 inches depth.

Visual representation of the cooler's dimensions.

10. Warranty and Support

Warranty Description: If you have any questions or concerns about the portable air conditioner, please contact the seller via email first.

For further assistance, troubleshooting not covered in this manual, or warranty claims, please contact HeaBoom customer support through your purchase platform. Please have your model number (F2) and purchase details ready when contacting support.

Related Documents - F2

Preview Ninebot KickScooter F2 Series User Manual
Comprehensive user manual for the Ninebot KickScooter F2 series, covering product specifications, operation, maintenance, and safety information. Includes details on F2, F2 Plus, and F2 Pro models.
Preview MSA F2 X-TREM Protective Helmet User Manual
The MSA F2 X-TREM helmet is a versatile protective helmet designed for various applications, including wildland firefighting, rescue operations, and mountaineering. This user manual provides essential information on its correct use, adjustment, maintenance, and available accessories, ensuring optimal safety and performance.
Preview WIPCOOL New Refrigerant Vacuum Pump Operation Manual
This manual provides operating instructions, technical specifications, features, and troubleshooting guidance for WIPCOOL's new refrigerant vacuum pumps, including single-stage, dual-stage, and cordless models.
Preview Hot Rocks Oven Fuse Replacement Guide
A step-by-step guide for replacing fuses in a Hot Rocks oven, including safety precautions and detailed instructions.
Preview Viltrox AF 50/2.0 Z Lens Manual and Specifications
Comprehensive guide for the Viltrox AF 50/2.0 Z lens, covering features, attachment, detachment, lens hood usage, construction, MTF graphs, safety notes, tips, cleaning, and detailed specifications for Z-mount cameras.
Preview Nauticam MWL-1 Macro to Wide Lens System for Underwater Photography
Explore the Nauticam MWL-1 Macro to Wide Angle Lens system, a versatile solution for underwater photography. This document details compatible camera lenses, housings, extension rings, and ports, including specifications and field of view conversions for various camera systems like Canon, Nikon, and Sony.