SHARDOR K Cup Coffee Maker Instruction Manual

1. Product Overview

The SHARDOR K Cup Coffee Maker (Model KM802G) is a versatile single-serve brewing system designed for convenience and quality. It supports brewing with K-Cup capsules, ground coffee, and offers options for both hot and iced beverages. With its compact design and multiple brewing capacities, it's an ideal addition to any kitchen.

Figure 1: SHARDOR K Cup Coffee Maker, showcasing its versatility with K-Cup, ground coffee, and iced coffee options.

2. Key Features

• Dual Brewing Options: Brew with K-Cup capsules or your favorite ground coffee using the included reusable filter.
• Hot & Iced Coffee: Enjoy both hot and refreshing iced coffee with dedicated settings.
• Strength Selection: Choose between Standard or Stronger brew for a customized taste.
• Multiple Brewing Capacities: Select from 6 oz, 8 oz, 10 oz, 12 oz, and 14 oz cup sizes.
• Removable Water Tank: Features a large 52 oz removable water tank for easy refilling and cleaning.
• Removable Drip Tray: Accommodates various cup heights, including taller travel mugs, by removing the drip tray.

Figure 2: The coffee maker's 3-in-1 compatibility, allowing use with K-Cup pods, ground coffee, and tea.

Figure 3: Visual representation of the five available brewing capacities.

3. Setup

1. Unpack: Carefully remove all components from the packaging.
2. Clean: Wash the removable water tank, K-Cup holder, and ground coffee filter basket with warm, soapy water. Rinse thoroughly and dry.
3. Position: Place the coffee maker on a flat, stable surface near an electrical outlet.
4. Fill Water Tank: Remove the 52 oz water tank from the back of the unit. Fill it with fresh, cold water up to the MAX line. Reattach the tank securely.
5. Initial Rinse: Before first use, perform an initial rinse cycle without any coffee. Fill the water tank, place a large mug on the drip tray, and select the largest brew size (14 oz) with the 'Hot Brew' option. Press the brew button to run a cycle of plain hot water through the machine. Discard the water.

Figure 4: The removable 52 oz water tank, designed for easy refilling and cleaning.

4. Operating Instructions

4.1 Brewing with K-Cup Capsules

1. Ensure the water tank is filled with fresh water.
2. Lift the lid of the brewing chamber.
3. Insert a K-Cup capsule into the K-Cup holder.
4. Close the lid firmly until it clicks.
5. Place your mug on the drip tray. If using a taller travel mug, remove the drip tray first.
6. Select your desired cup size (6 oz, 8 oz, 10 oz, 12 oz, or 14 oz).
7. Choose your brew strength: 'Standard' or 'Stronger'.
8. Select the 'Capsule' option.
9. Press the brew button to start brewing. The machine will automatically stop when the cycle is complete.

4.2 Brewing with Ground Coffee

1. Ensure the water tank is filled with fresh water.
2. Lift the lid of the brewing chamber.
3. Open the reusable ground coffee filter basket and fill it with your desired amount of ground coffee (medium grind recommended). Do not overfill.
4. Place the filled filter basket into the brewing chamber.
5. Close the lid firmly until it clicks.
6. Place your mug on the drip tray.
7. Select your desired cup size.
8. Choose your brew strength: 'Standard' or 'Stronger'.
9. Select the 'Ground' option.
10. Press the brew button to start brewing.

4.3 Brewing Iced Coffee

1. Fill your serving cup with ice.
2. Prepare your coffee using either a K-Cup capsule or ground coffee as described above.
3. Place the ice-filled cup on the drip tray.
4. Select your desired cup size (recommended 6-8 oz for iced coffee to prevent over-dilution).
5. Choose your brew strength: 'Standard' or 'Stronger'.
6. Select the 'Over Ice' option. The machine will brew at a lower temperature.
7. Press the brew button to start brewing.

Figure 5: The coffee maker's 'Over Ice' function for preparing refreshing iced coffee.

Figure 6: Illustration of the 'Bold' flavor option for a stronger coffee experience.

Figure 7: The removable drip tray allows for use with taller cups, ensuring compatibility with various cup heights.

5. Maintenance

5.1 Daily Cleaning

• After each use, remove and discard the used K-Cup capsule or ground coffee.
• Wash the K-Cup holder or ground coffee filter basket, and the drip tray with warm, soapy water. Rinse and dry.
• Wipe the exterior of the coffee maker with a damp cloth.

5.2 Descaling

Over time, mineral deposits (scale) can build up in your coffee maker, affecting its performance and coffee taste. The machine features an intelligent descaling reminder. When the 'Descale' light turns red, it's time to descale the unit.

1. Empty the water tank.
2. Fill the water tank with a descaling solution (e.g., white vinegar and water mixture, or a commercial descaling agent) according to the solution's instructions.
3. Place a large mug or container on the drip tray.
4. Press and hold the 'Hot Brew' and 'Over Ice' buttons simultaneously for 2 seconds to activate the descaling cycle.
5. The machine will run a descaling cycle. Once complete, discard the solution.
6. Rinse the water tank thoroughly and fill it with fresh water.
7. Run 2-3 cycles of plain water through the machine to rinse out any remaining descaling solution.
8. The 'Descale' light should turn off after successful descaling.

6. Troubleshooting

7. Specifications

8. Warranty and Support

The SHARDOR K Cup Coffee Maker (Model KM802G) comes with a One Year Warranty. For support or warranty claims, please refer to the contact information provided in your product packaging or visit the official SHARDOR website.

You can also scan the QR code on the product for support or contact support directly:

• Phone: 1-972-467-4438
• Email: support@mytastyle.com