ArcticPro 27-inch 300Hz FHD IPS Gaming Monitor (ADE27F4) User Manual

1. Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your ArcticPro 27-inch 300Hz FHD IPS Gaming Monitor (Model: ADE27F4). Please read this manual thoroughly before using the product to ensure optimal performance and safety. Keep this manual for future reference.

Figure 1.1: ArcticPro 27-inch 300Hz FHD IPS Gaming Monitor

2. Safety Information

Observe the following safety precautions to prevent damage to the monitor and ensure your safety:

• Do not expose the monitor to rain, moisture, or extreme temperatures.
• Ensure proper ventilation around the monitor. Do not block ventilation openings.
• Use only the power adapter and cables provided or recommended by the manufacturer.
• Avoid placing heavy objects on the power cord.
• Disconnect the power plug from the outlet if the monitor will not be used for an extended period.
• Do not attempt to service the monitor yourself. Refer all servicing to qualified personnel.

3. Package Contents

Verify that all items are present in your product package:

• ArcticPro 27-inch FHD IPS Gaming Monitor
• Monitor Stand (Base and Neck)
• Power Adapter and Power Cable
• DisplayPort (DP) Cable
• User Manual
• Screws for Stand Assembly

4. Setup

4.1 Assembling the Stand

1. Carefully remove the monitor from its packaging, placing it face down on a soft, clean surface to prevent scratches.
2. Attach the stand neck to the monitor panel using the provided screws.
3. Connect the stand base to the stand neck and secure it with the designated screw.

4.2 VESA Wall Mount Installation (Optional)

The monitor supports a 100x100mm VESA mounting pattern. To install with a VESA mount:

1. Remove the stand if it is already attached.
2. Attach your VESA-compatible wall mount bracket to the monitor using appropriate screws (not included).
3. Follow the instructions provided with your VESA mount for secure installation.

4.3 Connecting Cables

Connect the necessary cables to the monitor's rear ports. Refer to Figure 4.1 for port locations.

• Power Cable: Connect the power adapter to the monitor's power input, then plug the power cable into a wall outlet.
• DisplayPort (DP): For optimal performance (up to 300Hz), connect the included DP cable from your computer's graphics card to one of the monitor's DP 1.4 ports.
• HDMI: Alternatively, connect an HDMI cable (not included) from your computer or console to one of the monitor's HDMI 2.0 ports (up to 240Hz).

Figure 4.1: Rear Ports (2x DP 1.4, 2x HDMI 2.0, Power Input)

4.4 Initial Power-On

After connecting all cables, press the power button located on the monitor to turn it on. The monitor should automatically detect the input signal. If not, you may need to manually select the input source using the OSD menu.

5. Operating Instructions

5.1 On-Screen Display (OSD) Menu

The OSD menu allows you to adjust various monitor settings. Use the control buttons (typically located on the back or bottom right of the monitor) to navigate and select options.

• Menu Button: Opens the OSD menu.
• Navigation Buttons: Used to move up/down/left/right through menu options.
• Select/Enter Button: Confirms a selection.
• Exit Button: Closes the OSD menu or goes back to the previous level.

5.2 Key Settings and Features

• Refresh Rate (300Hz): This monitor supports a high refresh rate of up to 300Hz via DisplayPort, providing smoother motion for gaming. Ensure your graphics card and cable support this rate.


Figure 5.1: 300Hz Refresh Rate for Smooth Performance

• Response Time (1ms MPRT): The 1ms Moving Picture Response Time (MPRT) minimizes motion blur and ghosting, crucial for fast-paced gaming.


Figure 5.2: 1ms Response Time for Reduced Blurring

• Adaptive Sync: This technology synchronizes the monitor's refresh rate with your graphics card's frame rate, eliminating screen tearing and stuttering. Enable it in your graphics card settings and the monitor's OSD.

Figure 5.3: Adaptive Sync Eliminates Screen Tearing
• IPS Panel & Wide Color Gamut (125% sRGB): The In-Plane Switching (IPS) panel offers wide viewing angles (178° H/V) and accurate color reproduction with 125% sRGB coverage, ensuring consistent image quality from various perspectives.


Figure 5.4: IPS Panel with Wide Color Gamut

• Full HD Resolution (1920x1080p): Provides clear and sharp images for an immersive viewing experience.


Figure 5.5: Full HD 1080p Resolution

• Eye Care Features (Low Blue Light & Flicker-Free): Designed to reduce eye strain during prolonged use. Low Blue Light filters harmful blue light, and Flicker-Free technology eliminates screen flickering.

Figure 5.6: Eye Care Technologies

6. Maintenance

6.1 Cleaning the Monitor

• Always unplug the monitor before cleaning.
• Use a soft, lint-free cloth lightly dampened with water or a mild, non-abrasive screen cleaner.
• Do not use alcohol, ammonia-based cleaners, or abrasive chemicals, as these can damage the screen or casing.
• Wipe the screen gently to avoid scratching.

6.2 General Care

• Avoid placing the monitor in direct sunlight or near heat sources.
• Do not place heavy objects on the monitor or its cables.
• Keep the monitor away from strong magnetic fields.

7. Troubleshooting

If you encounter issues with your monitor, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact ArcticPro customer support.

8. Specifications

9. Warranty and Support

9.1 Limited Warranty

ArcticPro warrants this product against defects in material and workmanship for a period of one (1) year from the original purchase date. This warranty does not cover damage caused by accident, misuse, abuse, improper installation, or unauthorized repairs. Proof of purchase is required for warranty service.

9.2 Customer Support

For technical assistance, troubleshooting, or warranty inquiries, please contact ArcticPro customer support through the retailer's platform or visit the official ArcticPro website for contact information.