1. Introduction
This manual provides essential instructions for the Allimity AKB76038001 IR Replacement Remote Control. This remote is designed to function as a direct replacement for your original LG SoundBar System remote, offering seamless control over compatible models.
Compatible LG SoundBar System Models:
- SP60Y
- S65Q
- SP7Y
- S75QR
- SP8YA
- SP9YA
- S80QY
- S90QY
- S95QR
- SP70
- S80QR
- SPQ8-W
- SPQ8-S
- S78S2-S
This list includes known compatible models. If your specific model is not listed, please refer to the support section for assistance.
2. Setup
2.1 Battery Installation
The remote control requires two AAA batteries (not included) for operation. Follow these steps to install them:
- Locate the battery compartment cover on the back of the remote control.
- Press down on the tab and slide the cover off.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.

Image: Rear view of the remote control with the battery cover removed, illustrating the battery insertion process.
2.2 Initial Use
This is an IR (Infrared) replacement remote control. No programming or pairing is typically required. Once batteries are installed, it should function directly with compatible LG SoundBar Systems.
3. Operating Instructions
To ensure proper functionality, follow these guidelines when operating the remote control:
- Direct Line of Sight: Point the remote control directly at the IR sensor located on your LG SoundBar System.
- Clear Path: Ensure that no objects are blocking the path between the remote control and the IR sensor on your unit. Obstructions can interfere with the signal.

Image: Front view of the remote control, displaying its button layout for various functions.

Image: A user operating the remote control towards a soundbar system.
4. Maintenance
4.1 Battery Replacement
If the remote control's performance degrades or it stops responding, replace the batteries. Always use new alkaline batteries and ensure they are inserted with the correct polarity.
4.2 Cleaning
To clean the remote control, gently wipe it with a soft, dry cloth. Avoid using liquid cleaners, solvents, or abrasive materials, as these can damage the remote's surface or internal components.
4.3 Storage
When not in use for extended periods, it is recommended to remove the batteries to prevent leakage and potential damage to the remote control.
5. Troubleshooting
If you experience issues with your remote control, consider the following troubleshooting steps:
- Remote Not Responding:
- Check the batteries. Reinsert them or replace them with new alkaline batteries, ensuring correct polarity.
- Ensure there is a clear line of sight between the remote's IR emitter and the SoundBar's IR receiver. Remove any obstructions.
- Verify that the remote is pointed directly at the SoundBar's IR sensor.
- Limited Functionality:
- Confirm that your LG SoundBar System model is listed as compatible. While this remote is broadly compatible, some specific functions might vary depending on the SoundBar model.
6. Specifications
- Model Number: AKB76038001 (ZCM-AKB76038001-IR)
- Brand: ALLIMITY
- Product Dimensions: 5 x 2 x 0.6 inches (approximately 12.7 x 5.08 x 1.52 cm)
- Item Weight: 1 ounce (approximately 28 grams)
- Color: Black
- Special Feature: Ergonomic design
- Max Number of Supported Devices: 1
- Compatible Devices: Home Theater (specifically LG SoundBar Systems)
7. Support
If you have any questions, doubts, or problems regarding the received remote control, or if your device model number is not included in the compatibility list, please contact the seller directly for assistance. The seller aims to reply to customer inquiries within 24 hours.