KALINCO Tire Cover Instruction Manual

1. Product Overview

The KALINCO Tire Cover is designed to protect your tires from various environmental elements during storage. Made from durable 600D Oxford fabric, it offers waterproof, dust-proof, and UV-resistant properties. This cover is suitable for seasonal tire storage for a variety of vehicles.

• Size: Diameter 25", height 35". Designed to store 4 tires up to 25" in diameter.
• Material: 600D Oxford fabric with PU 3000mm waterproof silver coating.
• Features: Waterproof, UV-resistant, dust-proof, anti-aging, anti-tearing.
• Design: Zipper for easy installation and removal, adjustable drawstring with cord lock for secure fit.
• Compatibility: Suitable for motorcycle, car, SUV, truck, and trailer tires.

2. Specifications

3. Setup and Installation

1. Prepare Tires: Stack up to four tires, ensuring they are clean and dry before covering.
2. Measure Tires: Verify that the outer diameter of your stacked tires does not exceed 25 inches and the height does not exceed 35 inches to ensure a proper fit.
3. Position Cover: Unfold the tire cover and place it over the top of the stacked tires.
4. Zip Up: Utilize the central zipper to easily enclose the tires. Ensure the zipper is fully closed to prevent dust and moisture ingress.
5. Secure Drawstring: Tighten the adjustable pulling drawstring with the cord lock at the bottom of the cover. This secures the cover in place and prevents it from being dislodged by wind.

4. Operating and Usage

The KALINCO Tire Cover is designed for straightforward use to protect your tires in various environments.

• Indoor Storage: Use the cover to keep tires clean and dust-free when stored in a garage or basement.
• Outdoor Storage: The waterproof and UV-resistant material makes it suitable for outdoor storage, protecting tires from sun, rain, snow, and dirt.
• Easy Access: The full-length zipper allows for quick access to tires if needed, without completely removing the cover.
• Secure Fit: Always ensure the drawstring is tightly secured to prevent the cover from being blown off in windy conditions.

5. Maintenance

To ensure the longevity and effectiveness of your KALINCO Tire Cover, follow these maintenance guidelines:

• Cleaning: Wipe the cover with a damp cloth to remove dust and dirt. For tougher stains, use mild soap and water. Rinse thoroughly and allow to air dry completely before storage or re-use.
• Avoid Harsh Chemicals: Do not use bleach or abrasive cleaners, as these can damage the waterproof coating and fabric.
• Inspection: Periodically inspect the cover for any signs of wear, tears, or damage to the zipper and drawstring. Address minor issues promptly to prevent further damage.
• Storage: When not in use, fold the cover neatly and store it in a dry place away from direct sunlight.

6. Troubleshooting

• Cover does not fit: Ensure your tires' outer diameter is within 25 inches and the stacked height is within 35 inches. Measure your tires accurately before purchase.
• Cover blows off in wind: Make sure the adjustable drawstring at the bottom is pulled tight and secured with the cord lock. For extreme winds, consider adding additional securing straps (not included).
• Water accumulation on top: While the cover is waterproof, prolonged standing water can stress the material. Ensure tires are stacked on a level surface and consider placing a small object on top of the tires (under the cover) to create a slight dome for water runoff.
• Zipper sticking: Apply a small amount of zipper lubricant or a graphite pencil to the zipper teeth to improve smoothness. Avoid forcing the zipper.

7. Warranty and Support

For any questions, concerns, or support regarding your KALINCO Tire Cover, please refer to the seller's contact information on your purchase platform. Specific warranty details may vary by retailer and region. Please retain your proof of purchase for any warranty claims.