1. Introduction
This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Faven R8 Under-Canopy LED Grow Light Bar. Please read this manual thoroughly before use and retain it for future reference.
The Faven R8 LED Grow Light Bar is designed to provide supplemental lighting for indoor and hydroponic plant cultivation, enhancing growth and flowering under the plant canopy.
2. Safety Information
WARNING: Risk of Electric Shock. Read all safety instructions before installation and operation.
- Always disconnect power before installing, cleaning, or servicing the fixture.
- Do not operate the fixture with a damaged cord or plug.
- Ensure the power source voltage matches the fixture's requirements (120 Volts).
- Do not immerse the fixture in water or expose it to excessive moisture beyond its IP66 rating.
- Install the fixture in a well-ventilated area to prevent overheating.
- Keep away from flammable materials.
- This product is intended for horticultural use only.
Image: The Faven R8 LED Grow Light Bar features an IP66 rating, indicating protection against dust and powerful water jets.
3. What's in the Box
Your Faven R8 Under-Canopy LED Grow Light Bar package includes the following components:
- 2 x Faven R8 LED Fixtures
- 1 x 120 Volt Power Cord
- 1 x Extension Cord
Image: The Faven R8 Under-Canopy LED Grow Light Bar, a single unit. The package includes two such fixtures.
4. Setup and Installation
4.1 Mounting
The Faven R8 is designed for under-canopy mounting. Secure the fixtures using appropriate mounting hardware (not included) to ensure stability and proper positioning beneath your plant canopy. Ensure adequate clearance for air circulation.
4.2 Electrical Connection and Daisy-Chaining
Connect the power cord to one of the LED fixtures. For multiple fixtures, use the provided extension cord to daisy-chain them together. The Faven R8 supports daisy-chaining up to 10 lights on a 120V circuit.
Daisy-Chain Capacity (120V): Maximum 10 lights (1.0 Amps total).
To connect fixtures:
- Ensure all power is disconnected.
- Align the male connector of one fixture or extension cord with the female connector of another fixture.
- Push firmly until the connection is secure.
Image: Left: Female connector port. Right: Male connector port. These ports are used for power input and daisy-chaining.
Image: Illustration of two Faven R8 light bars being connected for daisy-chain operation.
5. Operating Instructions
5.1 Powering On/Off
Once properly installed and connected, plug the power cord into a standard 120V electrical outlet. The lights will illuminate. To turn off, unplug the power cord or use an external timer/controller.
5.2 Dimming Functionality
The Faven R8 LED Grow Light Bar is dimmable. It is compatible with external dimming controllers such as Trolmaster and Vivosun. Refer to your specific controller's manual for dimming instructions.
5.3 Light Spectrum
The R8 light bar provides a spectrum optimized for plant growth, particularly beneficial for flowering stages and under-canopy penetration.
Image: R8 light spectrum graph, illustrating the distribution of light wavelengths emitted by the fixture.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your Faven R8 LED Grow Light Bar.
- Cleaning: Disconnect power before cleaning. Use a soft, damp cloth to wipe the fixture. Do not use harsh chemicals or abrasive cleaners.
- Inspection: Periodically inspect the power cord and connections for any signs of damage or wear. Replace damaged components immediately.
- Ventilation: Ensure that the fixture's cooling fins (if present) are free from dust and debris to maintain proper heat dissipation.
Image: The Faven R8 light bar is designed to withstand humid environments, as shown by water droplets on its surface.
7. Troubleshooting
If you encounter issues with your Faven R8 LED Grow Light Bar, refer to the following common problems and solutions:
- Light does not turn on:
- Check if the power cord is securely plugged into both the fixture and the electrical outlet.
- Verify that the electrical outlet is functional by testing it with another device.
- Ensure all daisy-chain connections are secure.
- Lights flicker or dim unexpectedly:
- Check for loose connections in the power cord or daisy-chain.
- Ensure the total number of daisy-chained lights does not exceed the maximum capacity (10 lights for 120V).
- If using a dimmer, ensure it is compatible and functioning correctly.
- Overheating:
- Ensure adequate air circulation around the fixture.
- Clean any dust or debris from the fixture's surface.
If problems persist, contact Faven customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | FAVEN-R8-120V-2-EXT-1 |
| Brand | Faven |
| Voltage | 120 Volts |
| Wattage | 120 Watts |
| Light Source Type | LED |
| Length (per bar) | Approximately 46 inches |
| Overall Product Dimensions (L x W x H) | 8" x 48" x 10" (likely package or system dimensions) |
| Item Weight | 5.7 Pounds |
| Material | Aluminum |
| Finish Type | Painted |
| Color | White |
| Mounting Type | Under-Canopy Mount |
| Bulb Features | Dimmable, Daisy-chaining |
| Certifications | CE, DLC, ETL, FCC |
| UPC | 198715012699 |
| Included Components | 2 LED Fixtures, Power Cord, Extension Cord |
9. Warranty Information
Faven products are typically covered by a limited manufacturer's warranty. For specific details regarding the warranty period and terms for your Faven R8 Under-Canopy LED Grow Light Bar, please refer to the warranty card included with your product or visit the official Faven website.
10. Customer Support
If you have any questions, require technical assistance, or need to report an issue, please contact Faven customer support. Contact information can typically be found on the official Faven website or on the product packaging.
Note: For the most up-to-date support resources, please visit the manufacturer's website.
