Introduction
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your SISESOL 75" Tall Metal Storage Cabinet with Wheels. Please read this manual thoroughly before beginning assembly or use to ensure safe and efficient operation of your new storage cabinet.
Safety Information
To prevent injury or damage to the product, please observe the following safety guidelines:
- Always keep hands and fingers away from the door when locking or unlocking.
- Do not overload the cabinet, as it may tip over.
- Keep the cabinet away from heat sources to prevent fire hazards.
- Always use the cabinet on a flat, stable surface.
- Ensure all screws and fasteners are securely tightened during assembly and periodically check for tightness during use.
- For added stability, consider securing the cabinet to a wall using appropriate hardware (not included).
Package Contents
Before assembly, verify that all components are present and undamaged. Refer to the included parts list for detailed identification.
- Side Panels (2)
- Back Panels (2)
- Top Panel (1)
- Bottom Panel (1)
- Adjustable Shelves (4)
- Doors (2)
- Casters (4, 2 with brakes)
- Locking Mechanism (1) with Keys (2)
- Assembly Hardware (screws, nuts, washers, shelf clips)
Assembly Instructions
Follow these steps for proper assembly. It is recommended to have two people for certain steps.
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, flat surface and identify each part using the provided parts list.
- Assemble Back Panels: Connect the two back panels (C and D) using the provided screws and nuts. Ensure they are securely fastened.
- Attach Side Panels: Secure the side panels (A and B) to the assembled back panels using screws. Ensure the side panels are oriented correctly with the shelf adjustment holes facing inward.
- Install Top and Bottom Panels: Slide the top and bottom panels into place and secure them with screws.
- Attach Casters: Secure the four casters to the bottom panel using the provided screws. Ensure the two casters with brakes are positioned at the front for easy locking.
- Install Shelf Clips: Insert the shelf clips into the desired height adjustment holes on the side panels.
- Place Adjustable Shelves: Carefully place the adjustable shelves onto the installed shelf clips. Adjust height as needed.
- Attach Doors: Mount the doors (E and F) to the cabinet frame, ensuring the hinges are properly aligned. Install the locking mechanism on one of the doors.
Operating Instructions
Your SISESOL storage cabinet is designed for versatile use and security.
- Adjusting Shelves: The cabinet features 4 adjustable shelves. To change a shelf's height, remove the shelf, reposition the shelf clips to the desired slots on the side panels, and then reinsert the shelf.
- Locking Mechanism: The cabinet is equipped with a 3-point locking system and comes with 2 keys. Insert a key into the lock on the door and turn to secure or unlock the cabinet.
- Using Casters: The 360° swivel casters allow for easy movement of the cabinet. To lock the cabinet in place, press down on the brake levers located on two of the casters. To move, release the brakes.
- Door Magnets: Doors are equipped with magnets to help keep them securely closed when unlocked.
Maintenance
Regular maintenance will ensure the longevity and optimal performance of your storage cabinet.
- Cleaning: The cabinet's cold-rolled steel frame is coated with a stain-resistant phosphor-free powder, making it waterproof, scratch-resistant, and rust-resistant. Wipe surfaces with a damp cloth and mild detergent. Avoid abrasive cleaners.
- Inspection: Periodically check all screws, nuts, and fasteners to ensure they remain tight. Inspect casters for smooth operation and ensure brakes are functioning correctly.
Troubleshooting
If you encounter any issues with your SISESOL storage cabinet, refer to the following common solutions:
- Doors not closing properly: Check for any obstructions inside the cabinet. Ensure the cabinet is on a level surface. Verify that the door magnets are aligned and functioning.
- Casters not rolling smoothly: Check for debris caught in the wheels. Ensure the brakes are fully disengaged.
- Cabinet instability: Ensure the cabinet is placed on a flat, level surface. Verify all assembly screws are tightened.
If problems persist, please contact our online customer service for assistance. We are committed to helping you solve your concerns within 24 hours.
Specifications
| Brand | SISESOL |
| Model Name | TSJ |
| Color | White |
| Material | Metal |
| Product Dimensions | 15.8"D x 31.5"W x 74.6"H |
| Item Weight | 85 Pounds |
| Number of Shelves | 5 |
| Lock Type | Key |
| Base Type | Wheels |
| Assembly Required | Yes |
Warranty and Support
For any questions, concerns, or assistance with your SISESOL product, please contact our dedicated online customer service team. We are committed to providing support and resolving any issues within 24 hours.