Introduction
This manual provides comprehensive instructions for the safe and proper use, installation, and maintenance of your Ashland Lighted Tree Topper. Please read this manual thoroughly before use and retain it for future reference.
Important Safety Information
Always follow basic safety precautions when using electrical products to reduce the risk of fire, electric shock, and personal injury.
- Read all instructions before use.
- Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
- This product is not a toy. Keep out of reach of children.
- Do not mount or place near gas or electric heaters, fireplaces, candles, or other similar sources of heat.
- Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
- Unplug the product when leaving the house, when retiring for the night, or if left unattended.
- Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
- Do not cover the product with cloth, paper, or any material not part of the product when in use.
- Do not hang ornaments or other objects from cord, wire, or light string.
- Do not operate this product if the cord or plug is damaged, if it is not working properly, or if it has been dropped or damaged.
- For indoor use only.
Package Contents
Please verify that all components are present and undamaged:
- 1 x Ashland Lighted Tree Topper (Gold Snowflake Design with 10 Clear Lights)
Image: The Ashland Lighted Tree Topper, featuring a gold snowflake design with 10 clear lights, shown in its original retail packaging.
Setup Instructions
- Unpack the Tree Topper: Carefully remove the Ashland Lighted Tree Topper from its packaging. Inspect for any damage.
- Prepare the Tree: Ensure your Christmas tree is stable and securely placed.
- Position the Topper: Place the base of the tree topper securely onto the topmost branch or central stem of your Christmas tree. Ensure it is balanced and upright.
- Connect Power: Locate the power cord extending from the tree topper. Plug the cord into a standard 120V AC electrical outlet. Ensure the outlet is easily accessible.
- Test Lights: Once plugged in, the 10 clear lights should illuminate. If they do not, refer to the Troubleshooting section.
Operating Instructions
The Ashland Lighted Tree Topper is designed for simple operation.
- To Turn On: Plug the power cord into a live electrical outlet. The 10 clear lights will illuminate.
- To Turn Off: Unplug the power cord from the electrical outlet. The lights will turn off.
- For convenience, you may connect the tree topper to a timer (sold separately) to automate its on/off schedule.
Care and Maintenance
- Cleaning: Disconnect the tree topper from power before cleaning. Wipe gently with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the tree topper in its original packaging or a protective container in a cool, dry place, away from direct sunlight and moisture.
- Bulb Replacement: This tree topper uses standard miniature clear bulbs. If a bulb burns out, carefully twist it out and replace it with a new bulb of the same type and wattage (typically 2.5V, 0.17A). Always unplug the unit before replacing bulbs.
- Inspection: Periodically inspect the cord, plug, and light string for any signs of damage, fraying, or loose connections. Discontinue use if damage is found.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | Not plugged in; power outlet is off; loose bulb; burnt-out bulb; damaged cord. | Ensure the plug is fully inserted into a working outlet. Check if the outlet is controlled by a switch. Gently push in all bulbs to ensure they are seated correctly. Replace any burnt-out bulbs. Inspect the cord for damage; if damaged, discontinue use. |
| Some lights are out. | Loose or burnt-out bulb. | Gently push in all bulbs. Identify and replace any burnt-out bulbs. |
| Topper is unstable on the tree. | Improper placement; tree branch too thin. | Adjust the topper's position on a sturdier branch. Use additional ties or wire (not included) to secure it if necessary. |
Product Specifications
| Model Number | B0DQJ1MKF5 |
| Brand | Ashland |
| Product Dimensions | 14 x 13 x 2 inches (35.56 x 33.02 x 5.08 cm) |
| Item Weight | 11 ounces (312 Grams) |
| Light Type | Incandescent Clear Lights |
| Number of Lights | 10 |
| Power Source | Corded Electric (120V AC) |
| UPC | 195158572841 |
Warranty and Support
For information regarding warranty coverage or product support, please refer to the documentation included with your purchase or contact Ashland customer service directly. Contact details are typically available on the product packaging or the official Ashland website.