Introduction
Thank you for choosing the BOZYBO High Pressure Rain Shower Head with Handheld Spray Combo. This manual provides essential information for the safe installation, operation, and maintenance of your new shower system. Please read these instructions thoroughly before beginning installation or use.
An overview of the BOZYBO shower system, showing the large fixed rainfall shower head and the detachable handheld shower head, both actively spraying water.
Safety Information
Please observe the following safety guidelines during installation and use:
- Always turn off the main water supply before beginning any installation or maintenance procedures.
- Use appropriate tools and follow all local plumbing codes and regulations.
- Do not overtighten connections, as this may damage components or cause leaks.
- Ensure all connections are properly sealed with plumber's tape to prevent water leakage.
- Inspect all components for damage before installation. Do not install damaged parts.
Included Components
Verify that all the following components are included in your package:
- Exclusive Shower Arm
- Handheld Shower Head (10 Spray settings)
- 12-inch Rainfall Shower Head
- Stainless Steel Shower Hose (59 inches)
- User Manual
- Spare Washer
- Teflon Tape
A visual representation of all items included in the package: exclusive shower arm, handheld shower head, 12-inch rain shower head, stainless steel shower hose, user manual, spare washer, and Teflon tape.
Setup and Installation
Pre-Installation
- Ensure the main water supply to your shower is turned off.
- Remove your existing shower head and clean any old sealant or debris from the shower arm threads.
Installation Steps
- Step 1: Install Shower Arm/Diverter Unit. Apply Teflon tape (included) clockwise to the threads of your existing shower arm. Screw the new shower arm/diverter unit onto the shower arm until hand-tight, then tighten slightly with a wrench if necessary, ensuring the diverter knob faces downwards.
- Step 2: Attach Rainfall Shower Head. Apply Teflon tape to the threads on the top outlet of the diverter unit. Screw the 12-inch rainfall shower head onto this outlet.
- Step 3: Connect Handheld Shower Hose. Connect one end of the stainless steel shower hose to the side outlet of the diverter unit. Ensure a washer is in place before tightening.
- Step 4: Attach Handheld Shower Head. Connect the other end of the shower hose to the handheld shower head. Ensure a washer is in place before tightening.
- Step 5: Secure Handheld Shower Head. Place the handheld shower head onto the magnetic docking system integrated into the main shower arm. The buckle structure will provide additional security.
A four-step visual guide for installing the shower system, showing the connection of the main unit to the wall, attachment of the fixed shower head, connection of the hose, and securing the handheld unit.
This image illustrates the magnetic docking mechanism for the handheld shower head, which includes a buckle structure for secure attachment. It also shows the individual components: an upgraded bracket, splitter, shower arm, and shower holder.
Operating Instructions
Mode Selection
Use the black knob located on the shower arm/diverter unit to switch between the following water flow modes:
- Rainfall Spray: Water flows only from the large fixed shower head.
- Handheld Spray: Water flows only from the detachable handheld shower head.
- Rainfall + Handheld Spray: Water flows from both the fixed and handheld shower heads simultaneously.
Handheld Spray Settings
The handheld shower head offers 10 distinct spray settings. Rotate the dial on the face of the handheld shower head to select your desired spray pattern. Settings include:
- Pause
- Mist
- Massage + Mist
- Massage
- Rainfall + Massage
- Spraying
- Rainfall + Mist
- Power Mist
- Power Jet (for targeted cleaning)
- Wide Fan (for broader cleaning coverage)
This image displays the various spray options: Rainfall Spray, Handheld Spray, and a combination of both. It also shows the Power Jet and Wide Fan cleaning modes, along with eight distinct handheld spray patterns including Pause, Mist, Massage, and combinations.
Adjustability
- The main shower arm is designed with 360-degree adjustability, allowing you to position the fixed shower head to your preferred height and angle.
- The rainfall shower head itself features a 360-degree copper ball joint, enabling precise directional adjustment of the water flow.
The image demonstrates the full 360-degree adjustability of the main shower arm and the rainfall shower head, allowing users to direct water flow as desired.
Maintenance
Nozzle Cleaning
The shower heads are equipped with anti-clogging rubber nozzles. To remove mineral buildup and maintain optimal spray performance, periodically rub the rubber nozzles with your finger or a soft brush.
General Cleaning
To clean the exterior surfaces of your shower system, use a soft cloth and a mild, non-abrasive cleaner. Avoid using harsh chemicals, abrasive pads, or strong detergents, as these can damage the finish.
Detailed view of the shower head features, including flexible anti-clogging nozzles, specialized high-pressure massage jets, and the overall design of the 278 nozzles for a wide spray. The image also indicates the 12-inch size of the main panel.
Troubleshooting
Low Water Pressure
- Ensure the main water supply valve is fully open.
- Check the shower hose for any kinks or obstructions.
- Clean the nozzles on both shower heads for mineral buildup as described in the Maintenance section.
Leaks from Connections
- Turn off the water supply.
- Ensure all connections are tightened securely, but do not overtighten.
- Verify that plumber's tape was applied correctly and sufficiently to all threaded connections.
- Check for damaged washers in the connections and replace if necessary.
Handheld Shower Head Not Docking Securely
- Ensure the magnetic docking area on both the handheld shower head and the main arm is clean and free of soap scum or debris.
- Confirm the handheld shower head is correctly aligned with the magnetic dock.
Specifications
| Feature | Detail |
|---|---|
| Brand | BOZYBO |
| Model Number | 460311 |
| Style | Modern |
| Shape | Square |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Finish Type | Polished |
| Installation Type | Wall Mounted |
| Flow Rate | 2.5 gallons per minute (GPM) |
| Color | Starlight |
| Product Dimensions | 12"L x 7.4"W (Fixed Head) |
| Number of Handheld Settings | 10 |
| Special Features | Detachable Handheld, Self-Cleaning Nozzles, Magnetic Docking |
| Hose Length | 59 Inches |
| Item Weight | 4.04 pounds |
| UPC | 860013145415 |
This image provides detailed measurements of the fixed rainfall shower head and the handheld shower head, along with the overall system length. It also lists the associated patent numbers: US011857983B2, US12269049B1, and US0D1058748S.
Warranty Information
For detailed warranty information regarding your BOZYBO High Pressure Rain Shower Head with Handheld Spray Combo, please refer to the manufacturer's official website or contact their customer support directly. Warranty terms and conditions may vary.
Customer Support
If you require further assistance, have questions about installation, operation, or maintenance, please contact BOZYBO customer support. You can typically find contact information on the manufacturer's official website or through the retailer where you purchased the product.