XTRARM Duolite Mobile Electric TV Stand

Introduction

Thank you for choosing the XTRARM Duolite Mobile Electric TV Stand. This motorized TV lift is designed to provide a versatile and robust solution for displaying large flat-screen televisions, ranging from 45 to 110 inches and weighing up to 120 kg. Featuring remote-controlled height adjustment, integrated power outlets, and mobile casters, this stand is ideal for various settings including homes, conference rooms, airports, hotel lobbies, exhibition halls, and classrooms.

This manual provides essential information for the safe and efficient setup, operation, and maintenance of your XTRARM Duolite TV Stand. Please read it thoroughly before assembly and use.

Safety Information

• Ensure all components are present and undamaged before assembly. Do not use if any parts are missing or defective.
• Always follow the assembly instructions carefully. Incorrect assembly can lead to instability and potential injury.
• Do not exceed the maximum weight capacity of 120 kg (264 lbs) or the recommended TV size of 45-110 inches.
• Ensure the TV's VESA mounting pattern is compatible (200x200mm to 900x800mm).
• Keep children and pets away from the stand during operation, especially during height adjustments.
• Do not place liquids or heavy objects on the shelves that could spill or fall and damage the unit or cause injury.
• When moving the stand, ensure the TV is in its lowest position and the casters are unlocked. Lock the casters once the stand is in its desired position.
• Only use the provided power cord and integrated power strip. Do not overload the power outlets.
• Disconnect the power supply before cleaning or performing any maintenance.

Package Contents

Please verify that all parts listed below are included in your package. If any parts are missing or damaged, please contact XTRARM customer support.

• Main Base Unit with integrated power strip
• Motorized Lift Columns (2)
• TV Mounting Brackets and Hardware
• Adjustable Shelves (2)
• Remote Control
• Casters (4, two with brakes)
• Assembly Hardware Kit (screws, washers, tools)
• Power Cord (1.5m)
• Cable Management Clips
• User Manual

Image: Overview of the XTRARM Duolite Mobile Electric TV Stand, showing the main unit, remote control, and general design.

Setup and Assembly

Follow these steps to assemble your XTRARM Duolite TV Stand. It is recommended to have two people for assembly due to the weight of some components.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Verify all parts against the package contents list.
2. Attach Casters to Base: Secure the four casters to the bottom of the main base unit. Ensure the two casters with brakes are positioned on the front side for easy access.
   

   Image: Close-up view of the base showing the integrated power strip and a caster wheel with its locking mechanism.

3. Install Lift Columns: Attach the motorized lift columns to the base unit according to the provided diagrams. Ensure they are securely fastened.
4. Mount TV Brackets: Attach the TV mounting brackets to the back of your television. Ensure the VESA pattern (200x200mm to 900x800mm) matches and use the appropriate screws and spacers for your TV model.
5. Attach TV to Stand: Carefully lift the television and hook the mounted brackets onto the stand's mounting frame. Secure the TV using the locking mechanisms on the stand.
   

   Image: Rear view of the TV stand structure, illustrating the mounting points for the television.

6. Install Shelves: Attach the two adjustable shelves to the stand at your desired heights. The upper shelf is suitable for webcams or small devices, while the lower shelf can hold receivers or other media devices.
   

   Image: The adjustable shelves can be positioned at various heights between 230mm and 810mm from the base.

7. Cable Management: Route all cables through the integrated cable management system to maintain a clean and organized appearance.
   

   Image: Illustration of the cable management system and the upper shelf for accessories.

8. Connect Power: Plug the 1.5m power cord into a wall outlet. You can then power your TV and other devices using the 3 integrated 220V sockets and 2 USB (5V/2.4A) ports on the stand.

Operating Instructions

Height Adjustment

The XTRARM Duolite features a motorized lift system for seamless height adjustment using the included remote control.

• Raise TV: Press the UP arrow button on the remote control to raise the television.
• Lower TV: Press the DOWN arrow button on the remote control to lower the television.
• Stop: Release the button at any desired height. The lift operates at a speed of 22 mm/s, allowing for precise positioning between 910mm and 1560mm (from the floor to the center of the TV mount).
• Memory Presets: Use the M1 and M2 buttons to save and recall your preferred height settings. Refer to the remote control's specific instructions for programming these presets.

Image: The motorized lift allows for smooth height adjustments, providing optimal viewing angles.

Mobility

The stand is equipped with four large, quiet-rolling PU casters for easy movement.

• Move Stand: Unlock the two front casters by disengaging their brakes. Gently push the stand to its new location.
• Secure Stand: Once in the desired position, engage the brakes on the two front casters to prevent accidental movement.

Image: The stand's casters allow for easy repositioning within a room or between different areas.

Maintenance

• Cleaning: Use a soft, dry cloth to wipe down the stand. For stubborn marks, a slightly damp cloth with mild detergent can be used, followed by drying thoroughly. Avoid abrasive cleaners or solvents.
• Inspection: Periodically check all screws and connections to ensure they are tight and secure.
• Motor Care: The motorized lift system is designed for long-term use and requires minimal maintenance. Avoid obstructing the lift mechanism during operation.

Troubleshooting

If you encounter issues not listed here or if the problem persists, please contact XTRARM customer support for assistance.

Specifications

Image: Detailed technical dimensions and VESA mounting patterns supported by the stand.

Warranty and Support

XTRARM products are manufactured with high-quality materials and craftsmanship. For information regarding warranty coverage, please refer to the warranty card included with your product or contact your point of purchase.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please visit the official XTRARM website or contact their customer service department. You can also visit the XTRARM Store on Amazon for more information.