Introduction
This user manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your roborock F25 RT Vacuum Mop. The roborock F25 RT is a versatile all-in-one cordless wet and dry vacuum cleaner designed for various hard floor surfaces, including tile, vinyl, hardwood, LVP, laminate, and linoleum. It features powerful suction, self-cleaning capabilities, and a flexible design for thorough cleaning.
Safety Information
Please read all safety warnings and instructions carefully before using this appliance to prevent electric shock, fire, or serious injury. Keep this manual for future reference.
- Do not use outdoors or on wet surfaces.
- Do not allow to be used as a toy. Close attention is necessary when used by or near children.
- Use only as described in this manual. Use only manufacturer's recommended attachments.
- Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
- Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
- Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
- Do not handle plug or appliance with wet hands.
- Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
- Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
- Turn off all controls before unplugging.
- Use extra care when cleaning on stairs.
- Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
- Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
- Do not use without filter in place.
- Always disconnect from electrical outlet before connecting or disconnecting hose.
What's in the Box
Your roborock F25 RT package includes the following components:
- Wet Dry Vacuum Cleaner
- Charging Station
- Power Cord
- Floor Cleaning Solution (200ml)
- Supplementary Washable Filter
- Maintenance Brush
- User Manual
Image: The roborock F25 RT Wet Dry Vacuum Cleaner along with its charging station, power cord, a bottle of floor cleaning solution, a supplementary washable filter, and a maintenance brush.
Setup
Follow these steps for initial setup of your roborock F25 RT:
- Assembly: Insert the handle into the main body of the vacuum cleaner until it clicks into place.
- Charging Station Placement: Place the charging station on a flat, stable surface near a power outlet. Ensure there is enough space around it for easy access.
- Connect Power: Plug the power cord into the charging station and then into a wall outlet.
- Initial Charge: Place the vacuum cleaner onto the charging station. The indicator lights will show the charging status. For first use, fully charge the device, which typically takes several hours.
- Fill Clean Water Tank: Remove the clean water tank from the device. Fill it with clean tap water up to the MAX line. For enhanced cleaning, add the recommended amount of roborock floor cleaning solution. Reattach the tank securely.
Operating
The roborock F25 RT is designed for efficient wet and dry cleaning on hard floors. It offers powerful suction and flexible maneuverability.
Basic Operation
- Power On/Off: Press the power button on the handle to turn the vacuum on or off.
- Cleaning Modes: The device automatically adjusts suction and water flow based on detected mess.
- Maneuverability: The 180° lie-flat design allows you to easily clean under furniture and low-clearance areas. The 70° swivel steering provides flexible navigation around obstacles.
- Runtime: Enjoy up to 35 minutes of continuous cleaning on a single charge, covering areas up to 2825 sq ft in Eco mode.
Image: An overview of the roborock F25 RT's core features, including its 20000Pa suction power, 194°F hot water self-cleaning, 180° lie-flat design for reaching under furniture, and its ability to deliver tangle-free, streak-free cleaning results.
Image: Demonstrates the lightweight design (8.8 lbs) and flexible handling of the roborock F25 RT, highlighting its 70° swivel steering and the strategic placement of the water tank for better balance and ease of pushing.
Image: Shows the roborock F25 RT utilizing its 180° lie-flat design to effectively clean under low furniture, reaching areas with as little as 4.92 inches of clearance.
Image: Illustrates the triple edge cleaning feature of the roborock F25 RT, highlighting its ability to clean close to edges, corners, baseboards, and stairs for comprehensive floor coverage.
Official Product Video: How to Use roborock F25 RT
Video: This official roborock video demonstrates the proper way to use the F25 RT Wet Dry Vacuum Cleaner, covering basic operation and handling tips. (Duration: 1 minute 12 seconds)
Maintenance
Regular maintenance ensures optimal performance and longevity of your roborock F25 RT.
Self-Cleaning Function
- After each cleaning session, place the vacuum on its charging station and initiate the self-cleaning cycle.
- The device uses 194°F hot water to thoroughly clean the roller brush, melting away grime and debris.
- Following the wash, hot air drying activates to prevent odors and ensure the roller brush is completely dry for the next use.
Image: Illustrates the automated self-cleaning process of the roborock F25 RT, featuring 194°F hot water cleaning for the roller brush and subsequent hot air drying to ensure hygiene and prevent odors.
Tank and Filter Maintenance
- Empty Dirty Water Tank: After each use, remove the dirty water tank and dispose of the contents. Rinse the tank thoroughly with clean water.
- Clean Roller Brush: While the self-cleaning function is effective, occasionally remove the roller brush for manual inspection and cleaning, especially if you notice debris accumulation. Use the provided maintenance brush.
- Washable Filter: The filter is washable. Rinse it under running water and allow it to air dry completely before reinserting. Replace the filter periodically as needed.
Image: A diagram illustrating the solid-liquid separation technology integrated into the dirty water tank, designed to ensure a thorough and hygienic cleaning process by separating solid debris from liquid waste.
Troubleshooting
If you encounter issues with your roborock F25 RT, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Low battery; Not properly seated on charging station | Charge the device fully; Ensure it is correctly placed on the charging station. |
| Poor suction or cleaning performance | Dirty water tank full; Clean water tank empty; Clogged roller brush; Dirty filter | Empty and rinse dirty water tank; Refill clean water tank; Clean roller brush; Clean or replace filter. |
| Unpleasant odor from device | Dirty water tank not cleaned; Roller brush not dried properly | Empty and thoroughly clean dirty water tank; Ensure self-cleaning and hot air drying cycles are completed after each use. |
| Voice prompts indicating issues | Specific operational status or error | Listen to the voice prompt for specific instructions (e.g., "Low Battery", "Empty the dirty water tank"). Follow the guidance provided. |
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 8.7 x 43 x 10.31 inches |
| Weight | 8.8 Pounds |
| Model Number | WD5M7B |
| Batteries | 1 D batteries required (included) |
| Manufacturer | roborock |
| Country of Origin | China |
| Special Features | Portable, Wet/Dry, Lightweight, Washable Filter, Bagless |
| Filter Type | Washable Filter |
| Cordless | Yes |
Warranty and Support
For warranty information, technical support, or service inquiries, please contact roborock Technology Co. Ltd directly. Refer to the contact details provided in the packaging or on the official roborock website. Keep your purchase receipt as proof of purchase for warranty claims.
