SCULPFUN iCube Pro 5W Laser Engraver User Manual

1. Introduction

This user manual provides essential information for the safe and efficient operation of your SCULPFUN iCube Pro 5W Laser Engraver. Please read this manual thoroughly before using the device to ensure proper setup, operation, and maintenance. Retain this manual for future reference.

Image: The SCULPFUN iCube Pro 5W Laser Engraver, a compact blue and yellow unit, shown with an engraved wooden disc.

2. Safety Information

WARNING: This product is a Class 4 laser device. Direct exposure to the laser beam can cause severe eye injury and skin burns. Always wear the provided safety goggles during operation. Never look directly into the laser.

• Ensure the work area is well-ventilated.
• Do not operate the machine near flammable materials.
• Keep children and pets away from the operating area.
• The built-in temperature alarm will sound and the machine will stop if the internal temperature exceeds 45°C. Do not override this safety feature.
• Always disconnect power before performing maintenance or cleaning.
• Use only the power adapter supplied with the device.

Image: Diagram illustrating the temperature sensing safety alarm feature, showing the engraver with an alarm icon and a thermometer indicating 45°C.

3. Product Features

• Cutting and Engraving 2-in-1: Equipped with a 5W diode laser and 0.06mm ultra-fine laser focus, allowing for strong cutting penetration (up to 10mm soft board, 6mm acrylic) and ultra-fine engraving of delicate patterns.
• Built-in Smoke Filtering System: Features a high-efficiency smoke filter, eliminating the need for an external smoke exhaust box and effectively filtering smoke during engraving.
• Temperature Alarm: An integrated safety system that stops the machine and sounds an audible alarm if the internal temperature exceeds 45°C, ensuring user and machine safety.
• High-Speed Engraving: Utilizes a new 32-bit high-speed engraving motherboard, achieving speeds of up to 10,000mm/min, significantly improving engraving efficiency.
• Semi-open Structure Design: The removable laser protective shield allows for engraving objects both inside the machine and by placing the machine on the surface of larger objects. The working area is 130x130mm.
• Multiple Connection Methods: Supports connection via mobile phone (Sculpfun APP), computer (BT function or Type-C interface), compatible with Win7/Win8/Win10/Win11/MAC/IOS/Android/Linux systems.

Image: Close-up view demonstrating the 0.06mm ultra-fine laser focus and the machine's ability to cut 10mm wood and engrave fine details.

Image: Exploded view showing the components of the built-in smoke filtering system, including the removable window structure, smoke dust filter, activated carbon smell filter, and strong suction fan.

Image: Two views of the engraver demonstrating its semi-open design, allowing it to engrave objects placed inside or on top of larger items.

Image: Depiction of the various connection methods supported, including mobile app and computer connections via Wi-Fi, Bluetooth, USB, and TF Card.

4. Package Contents

Please verify that all items listed below are included in your package:

• SCULPFUN iCube Pro 5W Laser Engraver Unit
• Laser Head
• Power Adapter
• Power Cable
• Type-C Cable
• Metal Plate
• Cotton Filter
• U-Shaped Shield
• Lens Repair Kit
• Safety Goggles
• MDF Sample Board
• Basswood Sample Board

Image: A visual representation of all components included in the SCULPFUN iCube Pro 5W package, laid out neatly.

5. Setup Guide

Follow these steps to set up your SCULPFUN iCube Pro 5W Laser Engraver:

1. Unpacking: Carefully remove all components from the packaging.
2. Placement: Place the engraver on a stable, level surface in a well-ventilated area, away from flammable materials.
3. Connect Power: Connect the power adapter to the engraver and then plug it into a suitable power outlet.
4. Connect to Computer/Mobile Device:
   • USB Connection: Use the provided Type-C cable to connect the engraver to your computer.
   • Bluetooth/Wi-Fi: Refer to the Sculpfun APP instructions for wireless connection setup.
5. Software Installation: Install the recommended engraving software (e.g., LightBurn, LaserGRBL) on your computer or the Sculpfun APP on your mobile device.
6. Driver Installation (if necessary): Ensure all necessary drivers for the USB connection are installed. You may need to check Device Manager on Windows to confirm the COM port.
7. Initial Software Configuration:

   For LightBurn, follow the on-screen wizard to set up your device. Select "GRBL" as the device type and "Serial/USB" for connection. Input the work area dimensions as 130mm x 130mm. Ensure "Auto home your laser on startup" is enabled for proper calibration.

   Video: This video demonstrates the initial connection and setup process for the SCULPFUN iCube using LightBurn software, including selecting the correct device type and setting up the work area dimensions.
8. Test Engraving: Before starting any major project, perform a small test engraving on a sample material to verify settings and functionality.

6. Operating Instructions

This section outlines the general steps for operating your laser engraver. Specific software instructions will vary.

1. Prepare Material: Place the material to be engraved or cut on the metal plate inside the engraver. Ensure it is flat and securely positioned. For larger objects, the semi-open design allows the engraver to be placed directly on top of the material.
2. Design/Load Project: Open your engraving software (e.g., LightBurn, Sculpfun APP) and either create a new design or load an existing project file.
3. Adjust Settings: Configure the laser parameters (power, speed, passes) according to the material type and desired effect. Refer to material testing guides for optimal settings.
4. Preview and Frame: Use the software's preview function to visualize the engraving path. Utilize the "Frame" function on the engraver to ensure the laser path is within the boundaries of your material.
5. Wear Safety Goggles: Always wear the provided safety goggles before initiating any laser operation.
6. Start Engraving/Cutting: Initiate the process from your software. Monitor the engraving process closely.
7. Monitor Safety Features: Pay attention to the temperature alarm. If it activates, stop the machine immediately and allow it to cool down.
8. Completion: Once the process is complete, wait for the laser to stop completely before opening the protective shield or removing the material.

7. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your engraver.

• Cleaning the Laser Lens: Periodically clean the laser lens using a soft, lint-free cloth and lens cleaning solution. Refer to the lens repair kit instructions for proper procedure.
• Replacing Filters: The smoke filter will accumulate dust and debris over time. Replace the cotton filter and activated carbon smell filter as needed to maintain effective smoke filtration. One free filtering set is included, and additional sets can be purchased.
• General Cleaning: Keep the interior and exterior of the engraver clean from dust and debris. Use a soft brush or compressed air for hard-to-reach areas.
• Firmware Updates: Check the SCULPFUN official website or app for any available firmware updates to ensure your device has the latest features and bug fixes.

8. Troubleshooting

This section addresses common issues you might encounter.

9. Specifications

10. Warranty and Support

For warranty information and technical support, please refer to the official SCULPFUN website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

Manufacturer: SCULPFUN
Date First Available: December 10, 2024

For further assistance, you may visit the SCULPFUN Store on Amazon.