1. Product Overview
The MSI MAG CORELIQUID C360 V2 is an All-in-One (AIO) ARGB CPU liquid cooler designed for efficient thermal management of your processor. This cooler features a 397mm radiator and three 120mm ARGB PWM fans, ensuring stable performance even under heavy loads. Its robust construction and metallic-like hardness contribute to durability and excellent heat dissipation.
Key Features:
- Single Frame, Three Fans: Radiator fans utilize a single frame, simplifying fan speed and ARGB control with only two cables.
- EZ Swap Water Block: Includes two tool-free swappable water blocks for easy customization.
- Rotatable Blockhead: The cold plate can be mounted in any orientation, and the blockhead can be rotated up to 270 degrees to maintain an upright logo.
- Pump Motor Resonance Elimination: Engineered for silent operation with optimized performance.
- Evaporation Proof Tubing: Designed to prevent coolant loss and offer flexibility for convenient assembly.
2. Installation Guide
This section provides detailed instructions for installing your MSI MAG CORELIQUID C360 V2 AIO CPU liquid cooler. Ensure your system is powered off and unplugged before beginning installation.
2.1 Unboxing and Components
Upon opening the package, verify all components are present. The main components include the liquid cooler unit (pre-installed with radiator fans), mounting brackets, and screws. Refer to the user manual QR code on the packaging for a complete list of accessories.
2.2 Water Block Installation
- Install the Bracket: Attach the appropriate mounting bracket (Intel or AMD) onto the water block. The UNI Bracket supports both Intel and AMD sockets.
- Apply Thermal Paste: Apply a small amount of thermal paste to the center of your CPU's Integrated Heat Spreader (IHS).
- Remove Protective Film: Carefully remove the protective film from the copper base of the water block before mounting.
- Mount Water Block: Align the water block with the CPU and gently place it onto the motherboard.
- Secure with Screws: Tighten the screws in a diagonal pattern until the water block is firmly secured. Do not overtighten.
2.3 Radiator and Fan Installation
Mount the radiator to an available fan mount in your PC case (e.g., top, front, or rear). Ensure adequate airflow. The fans are pre-installed on the radiator, simplifying cable management.
2.4 Cable Connections
Connect the pump and fan cables to the appropriate headers on your motherboard. The single-frame fan design reduces the number of cables needed for ARGB and fan speed control.
3. Operating Instructions
Once installed, the MSI MAG CORELIQUID C360 V2 operates automatically to cool your CPU. The fans and pump adjust their speed based on CPU temperature, managed by your motherboard's fan control settings or MSI's software.
3.1 ARGB Control
The Addressable RGB (ARGB) lighting on the fans and water block can be customized using compatible motherboard software (e.g., MSI Mystic Light) or a dedicated ARGB controller (if included or purchased separately). Refer to your motherboard's manual for specific ARGB header locations and software instructions.
3.2 Offset Kit (Optional)
For Intel Core Ultra series processors, an adjustable offset kit is included to optimize contact with varying heat source positions, potentially reducing CPU temperatures by up to 4.8°C. Follow the specific instructions provided with the offset kit for installation.
4. Maintenance
Regular maintenance ensures optimal performance and longevity of your liquid cooler.
- Dust Cleaning: Periodically clean dust from the radiator fins and fan blades using compressed air. Ensure fans are not spinning during cleaning.
- Tubing Inspection: Check the evaporation-proof tubing for any signs of wear, kinks, or leaks. While designed to prevent coolant loss, occasional inspection is recommended.
- Fan Inspection: Ensure fans are spinning freely and quietly. Replace any noisy or malfunctioning fans.
5. Troubleshooting
If you encounter issues with your liquid cooler, refer to the following common problems and solutions:
- High CPU Temperatures:
- Ensure the water block is securely mounted and making good contact with the CPU.
- Verify thermal paste application.
- Check if radiator fans are spinning and properly connected.
- Clean dust from the radiator fins.
- Pump Noise:
- Ensure the pump is receiving adequate power.
- Check for air bubbles in the loop (orient the radiator higher than the pump if possible).
- The pump motor resonance elimination feature minimizes noise, but persistent unusual noise may indicate an issue.
- ARGB Not Working:
- Verify ARGB cables are correctly connected to the motherboard or controller.
- Ensure ARGB software is installed and configured correctly.
- Fan Malfunction:
- Check fan power connections.
- Ensure fan speed control settings in BIOS or software are not set too low.
For further assistance, please contact MSI customer support.
6. Specifications
| Feature | Specification |
|---|---|
| Brand | MSI |
| Model Number | CLA15360 |
| Cooling Method | Water |
| Radiator Size | 397mm (implied by C360 in title, actual product dimensions are 18 x 10 x 6 inches for the whole unit) |
| Fan Size | Triple 120mm ARGB PWM Fans |
| Maximum Rotational Speed | 5200 RPM (Pump) |
| Power Connector Type | 4-Pin |
| Compatible Devices | Desktop, Laptop (CPU) |
| Material | Plastic |
| Item Weight | 1.1 pounds |
| Product Dimensions (LxWxH) | 18 x 10 x 6 inches |
| UPC | 824142389690, 824142381304 |
7. Warranty and Support
MSI products are covered by a manufacturer's warranty. For specific warranty terms, registration, and support, please visit the official MSI website or contact their customer service. Keep your proof of purchase for warranty claims.
Optional protection plans may be available for extended coverage. Refer to your retailer for details on 3-Year or 4-Year Protection Plans.
