boAt Bassheads 95 Wired Earphones User Manual

Introduction

Thank you for choosing the boAt Bassheads 95 Wired Earphones. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your earphones. Please read it carefully to ensure optimal performance and longevity of your device.

The Bassheads 95 earphones are designed for an immersive audio experience, featuring 10mm dynamic drivers for rich sound, an in-line microphone for clear communication, and integrated controls for easy management of audio and calls. Their lightweight design and snug fit ensure comfort during extended use.

Package Contents

1 x boAt Bassheads 95 Wired Earphones
1 x Warranty Card

Setup

Connecting to Your Device

The boAt Bassheads 95 earphones connect via a standard 3.5mm audio jack.

Locate the 3.5mm audio port on your smartphone, tablet, laptop, desktop, or car audio system.
Insert the 3.5mm jack of the earphones firmly into the audio port until it clicks into place.
Ensure the connection is secure for optimal audio transmission.

Wearing the Earphones

For the best sound quality and comfort, ensure the earphones are worn correctly.

Identify the left (L) and right (R) earpieces.
Gently insert each earpiece into the corresponding ear canal.
Adjust the earpieces until they feel snug and comfortable. A proper fit helps in passive noise isolation and enhances bass response.

Image showing how to properly wear the boAt Bassheads 95 earphones for a snug fit.

Figure 1: Proper placement of the earphone in the ear for a snug fit. This ensures comfort and optimal sound delivery.

Operating Instructions

Integrated Controls

The Bassheads 95 features an in-line remote with a multi-function button for easy control of your audio and calls.

Play/Pause Audio: Press the multi-function button once.
Next Track: Press the multi-function button twice quickly.
Previous Track: Press the multi-function button three times quickly.
Answer/End Call: Press the multi-function button once during an incoming or active call.
Reject Call: Press and hold the multi-function button for approximately 2 seconds during an incoming call.

Using the In-Line Microphone

The built-in microphone allows for hands-free communication.

Ensure the microphone is positioned close to your mouth for clear voice pickup during calls or voice commands.
Avoid covering the microphone with clothing or hands.

Image showing the in-line microphone on the boAt Bassheads 95 earphones.

Figure 2: Location of the in-line microphone for hands-free calls and voice commands.

Voice Assistant Activation

Activate your device's voice assistant (e.g., Google Assistant, Siri) directly from your earphones.

Press and hold the multi-function button for approximately 2 seconds to activate the voice assistant on your connected device.
Speak your command clearly after the activation prompt.

Image illustrating voice assistant icons (Google Assistant, Siri) indicating compatibility with boAt Bassheads 95 earphones.

Figure 3: Voice Assistant compatibility for convenient control.

Maintenance

Proper care and maintenance will extend the life of your boAt Bassheads 95 earphones.

Cleaning: Gently wipe the earpieces and cable with a soft, dry, lint-free cloth. Do not use harsh chemicals or abrasive materials.
Storage: When not in use, store your earphones in a clean, dry place, away from extreme temperatures and direct sunlight. Avoid tangling the cable.
Cable Care: Do not pull the cable forcefully when disconnecting from a device. Always grasp the 3.5mm jack. Avoid sharp bends or knots in the cable to prevent internal damage.
Moisture: Keep the earphones away from water and excessive moisture. They are not waterproof.

Troubleshooting

If you encounter issues with your earphones, refer to the following common problems and solutions.

Problem	Possible Cause	Solution
No sound or low volume	Earphone jack not fully inserted. Device volume too low or muted. Incorrect audio output selected on device. Damaged cable or jack.	Ensure the 3.5mm jack is fully inserted into the device's audio port. Increase the volume on your connected device. Check your device's audio settings to ensure the correct output is selected. Test with another device or another pair of earphones to rule out a device issue. If the problem persists, the earphones may be damaged.
Microphone not working	Microphone blocked. Incorrect microphone input selected on device. Application permissions. Damaged microphone.	Ensure the microphone is not covered. Check your device's audio input settings to ensure the external microphone is selected. Verify that the application you are using (e.g., calling app) has permission to access the microphone. Test with another device or another pair of earphones.
Poor sound quality (static, distortion)	Loose connection. Damaged cable or jack. Audio source quality.	Ensure the 3.5mm jack is securely connected. Test with another device or audio source. Try playing different audio files to check if the issue is with the source material.

Specifications

Key technical specifications for the boAt Bassheads 95 Wired Earphones:

Model Name: Bassheads 95
Driver Size: 10mm Dynamic Drivers
Connectivity: Wired (3.5mm Jack)
Ear Placement: In Ear
Form Factor: In Ear
Microphone: In-line
Controls: Integrated Push Button, Voice Assistant
Cable Length: 120cm
Weight: 45 Grams
Compatible Devices: Smartphones, Tablets, Desktops, Laptops, Car Audio Systems
Box Contents: 1 x Wired Earphones, 1 x Warranty Card
Country of Origin: China

Image highlighting the 10mm dynamic drivers of the boAt Bassheads 95 earphones.

Figure 4: Illustration of the 10mm dynamic drivers responsible for the audio output.

Image emphasizing the lightweight build of the boAt Bassheads 95 earphones.

Figure 5: The lightweight design of the earphones for comfortable wear.

Warranty and Support

Warranty Information

The boAt Bassheads 95 Wired Earphones come with a 1 Year Warranty from the date of purchase. Please retain your purchase receipt for warranty claims. The warranty covers manufacturing defects. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

For detailed warranty terms and conditions, please refer to the warranty card included in your package.

Customer Support

For any queries, technical assistance, or warranty claims, please contact boAt customer support.

Manufacturer: Imagine Marketing Limited
Address: Unit no. 204 & 205, 2nd floor, D-wing & E-wing, Corporate Avenue, Andheri Ghatkopar Link Road, Mumbai, Maharashtra-400093, India
Online Support: Visit the official boAt website or their Amazon store for support resources. boAt Amazon Store