Newday 72d89457-0f92-4573-a205-141714c20d8a
Newday 132cm Ceiling Fan with Light and Remote Control User Manual
Model: 72d89457-0f92-4573-a205-141714c20d8a
1. Introduction
Thank you for choosing the Newday 132cm Ceiling Fan with Light. This manual provides essential information for the safe installation, operation, and maintenance of your new ceiling fan. Please read these instructions thoroughly before installation and retain them for future reference.
Image 1.1: The Newday 132cm Ceiling Fan with Light shown in different indoor and outdoor covered settings, highlighting its versatile design.
2. Safety Instructions
Always follow basic safety precautions when installing and operating this appliance to reduce the risk of fire, electric shock, and personal injury.
- Ensure the ceiling structure can support a weight greater than 45 kg (99 lbs).
- Maintain a minimum distance of 76 cm (30 inches) between fan blades and any obstacles.
- Ensure fan blades are at least 213 cm (84 inches) from the floor.
- All electrical connections must comply with local codes and national electrical codes.
- Turn off power at the circuit breaker before installation or maintenance.
- Do not use the fan with a dimmer switch not specifically designed for ceiling fans.
- This product is designed for indoor use only and is not waterproof.
3. Package Contents
Verify that all components are present and undamaged before beginning installation.
- Ceiling Fan Motor Assembly
- Fan Blades (MDF wood)
- LED Light Kit
- Remote Control
- Mounting Bracket and Hardware
- Downrod (if applicable)
- User Manual
Image 3.1: Key components of the Newday ceiling fan, including the remote control, light module, and LED light board.
4. Setup and Installation
Installation requires a ceiling capable of supporting over 45 kg. Ensure proper clearance from obstacles and the floor.
- Prepare the Installation Site: Turn off power at the main circuit breaker. Secure the mounting bracket to a ceiling joist or a suitable fan-rated outlet box.
- Assemble the Fan: Attach the fan blades to the motor assembly. Connect the downrod (if used) to the motor and canopy.
- Wire the Fan: Follow the wiring diagram provided in the full instruction manual. Connect the fan's electrical wires to the household wiring.
- Mount the Fan: Carefully lift the fan assembly and hang it on the mounting bracket. Secure the canopy to the ceiling.
- Install the Light Kit: Connect the LED light kit to the fan's wiring and secure it to the fan housing.
- Restore Power: Turn on power at the circuit breaker and test the fan and light functions.
Image 4.1: Product dimensions (132cm diameter, 32cm height), recommended room size (16-36 m²), and installation options for flat or sloped ceilings (max 15° incline).
Image 4.2: Technical diagram detailing the fan's dimensions and critical measurements for installation.
Installation Video Guide
Video 4.1: An official installation video demonstrating the steps to set up the Newday ceiling fan. This video provides a visual guide to supplement the written instructions.
5. Operating Instructions
Your Newday ceiling fan is controlled by the included remote control.
5.1 Remote Control Functions
Image 5.1: The remote control for the Newday ceiling fan, showing buttons for fan speed, light control, timer, and sleep mode.
- Fan On/Off: Press the dedicated button to turn the fan on or off.
- Fan Speed Control: Select from 6 available speeds (1-6).
- Speed 1: 94 RPM (5W) - Gentle breeze
- Speed 2: 114 RPM (8W)
- Speed 3: 130 RPM (11W) - Natural wind
- Speed 4: 150 RPM (15W)
- Speed 5: 167 RPM (19W)
- Speed 6: 189 RPM (25W) - Strong cooling wind
- Sleep Mode: Press the "moon" button to activate sleep mode. Speeds 1, 2, and 3 will cycle every 20 seconds to simulate natural wind, providing a comfortable sleeping environment.
- Timer Function: Set the fan to turn off automatically after 1, 3, or 6 hours.
Image 5.2: Visual representation of the 6 fan speeds, from slow to fast, and the maximum air volume of 5200 CFM.
Image 5.3: Details of the sleep mode, including cycling speeds (1, 2, 3 every 20 seconds) and the fan's quiet operation at low speeds (as low as 20 dB).
5.2 Light Control
- On/Off: Press the light button to turn the LED light on or off.
- Stepless Dimming: Use the "+" and "-" buttons to adjust brightness continuously from 20% (460 LM) to 100% (2300 LM).
- Color Temperature Adjustment:
- Short press "NW" for natural white light.
- Long press "WW" to continuously decrease color temperature (K-), achieving warmer tones (down to 3000K).
- Long press "DW" to continuously increase color temperature (K+), achieving cooler tones (up to 6500K).
- Memory Function: The fan remembers your last light setting (brightness and color temperature) when turned off and on again.
Image 5.4: Demonstrates the stepless adjustment of color temperature from warm white (3000K) to cool white (6500K) and brightness from 20% to 100%.
5.3 Reversible Function (Summer/Winter Mode)
The fan features a reversible motor for year-round comfort. A switch on the fan body (or remote, if specified in full manual) controls the direction.
- Summer Mode (Counter-clockwise): Creates a downward airflow, producing a cooling effect.
- Winter Mode (Clockwise): Creates an upward airflow, circulating warm air trapped near the ceiling to balance room temperature.
Image 5.5: Illustrates the fan's reversible function, showing downward airflow for summer cooling and upward airflow for winter heat distribution.
6. Maintenance
Regular maintenance ensures optimal performance and extends the life of your ceiling fan.
- Cleaning: Periodically clean the fan blades and motor housing with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Tighten Fasteners: Check all screws and fasteners annually to ensure they are secure.
- Blade Balance: If the fan wobbles, check that all blades are securely attached and balanced. A balancing kit (not included) may be used if necessary.
- Light Source: The integrated LED light source has a long lifespan (30,000 hours). If replacement is needed, contact customer support.
7. Troubleshooting
Before contacting customer support, refer to the following common issues and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power; loose wiring; remote control battery dead. | Check circuit breaker. Ensure all connections are secure. Replace remote control battery. |
| Light does not work | Loose wiring; LED module failure. | Check light kit wiring. Contact customer support if LED module is faulty. |
| Fan wobbles | Loose blades; unbalanced blades; loose mounting. | Ensure all blade screws are tight. Use a balancing kit. Check mounting bracket security. |
| Remote control not responding | Battery dead; remote not paired; interference. | Replace battery. Refer to full manual for remote pairing instructions. Reduce interference sources. |
| Fan is noisy | Loose parts; motor issue. | Check for loose screws or components. Ensure blades are clean. If noise persists, contact support. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Newday |
| Model Number | 72d89457-0f92-4573-a205-141714c20d8a |
| Color | White |
| Material | Acrylic, MDF Wood, Metal |
| Style | Modern |
| Product Dimensions (L x W x H) | 35 x 132 x 132 cm (13.8 x 52 x 52 inches) |
| Item Weight | 8.06 kg (17.77 lbs) |
| Power Source | Electric Cable (220 Volts) |
| Control Method | Remote Control (Infrared) |
| Fan Speeds | 6 speeds (94-189 RPM) |
| Max Air Volume | 5200 CFM |
| Motor Type | DC Motor (Quiet operation, <35 dB) |
| Light Type | Integrated LED |
| Light Wattage | 24 Watts |
| Luminous Efficacy | 2300 Lumens (Max) |
| Color Temperature | 3000K - 6500K (Stepless adjustable) |
| Brightness | 20% - 100% (Stepless dimmable) |
| LED Lifespan | 30,000 hours |
| Features | 3-Timer (1h, 3h, 6h), Memory Function, Sleep Mode, Reversible (Summer/Winter) |
| Mounting Type | Ceiling Mount, Semi-flush mount (Max 15° slope) |
| Recommended Room Size | 16-36 m² |
| Indoor/Outdoor Use | Indoor (Not waterproof) |
| Energy Efficiency Class | E |
| Country of Origin | China |
Image 8.1: EU Energy Label for the Newday ceiling fan, indicating its energy efficiency class.
9. Warranty and Support
Newday provides a 2-year warranty for this product. We are committed to offering reliable service and support.
- For any assistance with your ceiling fan, please contact Newday customer support.
- We aim to provide the best solution in a timely manner.
Image 9.1: Newday support details, including 24-hour service and a 2-year warranty period.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.