UNITOPSCI 4-Inch Mirror Dash Cam User Manual

1. Introduction

The UNITOPSCI 4-Inch Mirror Dash Cam is designed to provide reliable front and rear video recording for your vehicle. This device integrates a 4-inch LCD screen into a rearview mirror, offering features such as 1080P dual camera recording, enhanced night vision, motion detection, loop recording, and parking assistance. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance.

2. Package Contents

Please verify that all items listed below are included in your package:

• 1 x Mirror Dash Cam
• 1 x Backup Camera
• 1 x 32GB SD Card
• 1 x Extended Line (for backup camera)
• 1 x Power Cord (car charger)
• 1 x User Manual
• 1 x Bandage (for mounting)
• 1 x Accessories Parts (additional mounting hardware)

Figure 2.1: Included Package Contents

3. Product Features

The UNITOPSCI Mirror Dash Cam offers a range of features designed to enhance driving safety and recording capabilities:

• Dual 1080P Recording: Records simultaneously from the front and rear cameras in Full HD 1080P resolution.
• 4-Inch LCD Screen: Integrated into the rearview mirror for real-time display and intuitive touch control.
• Enhanced Night Vision & WDR Technology: High-quality chip and WDR (Wide Dynamic Range) technology ensure clear video capture in low-light conditions and reduce glare.
• Reversing Assist: Automatically displays a clear reversing image with parking guidelines when the vehicle is in reverse, aiding safe parking.
• G-Sensor Emergency Recording: Detects sudden impacts or collisions and automatically locks the current video footage to prevent overwriting, serving as crucial accident evidence.
• Loop Recording: Continuously records video, automatically overwriting the oldest unlocked files when the memory card is full. Supports up to 128GB TF card (32GB included).
• Motion Detection: When enabled, the dash cam will automatically start recording if motion is detected in front of the vehicle while parked.
• 24-Hour Parking Monitor: With a separately purchased hardwire kit, the dash cam can monitor your vehicle for 24 hours, waking up from dormant mode to record if a collision is detected.
• 150-Degree Field of View: Provides a wide viewing angle for comprehensive coverage of the road.

Figure 3.1: Key Features Overview

Figure 3.2: Enhanced Night Vision

Figure 3.3: Reverse Parking Assistant

Figure 3.4: Six Display Modes

Video 3.1: Dash Cam Display Demonstration. This video shows the physical appearance of the dash cam and its screen displaying live footage.

4. Setup and Installation

Follow these steps for proper installation of your mirror dash cam:

1. Mount the Mirror Dash Cam: Secure the mirror dash cam over your existing rearview mirror using the provided bandages. Ensure it is firmly attached and does not obstruct your view.
2. Install the Rear Camera: Mount the backup camera at the rear of your vehicle, typically above the license plate or on the rear window. Ensure it has a clear view.
3. Connect the Rear Camera: Route the extended line from the rear camera to the main mirror dash cam. Connect the red wire of the extended line to your car's reverse light positive terminal to enable the reversing assist function.
4. Connect Power: Plug the power cord (car charger) into your car's cigarette lighter socket and connect the other end to the mirror dash cam.
5. Insert SD Card: Insert the provided 32GB SD card into the designated slot on the dash cam. Ensure it is inserted correctly.
6. Adjust Camera Angle: Once powered on, adjust the front camera lens angle to capture the desired view of the road ahead.

Figure 4.1: Installation Diagram

5. Operating Instructions

The dash cam is designed for user-friendly operation. Most functions are controlled via the touch screen.

5.1 Power On/Off

• Automatic: The dash cam will automatically power on and begin recording when your vehicle starts, and power off when the engine is turned off.
• Manual: Press and hold the power button (usually located on the bottom or side of the mirror) to manually turn the device on or off.

5.2 Screen Display Modes

Swipe left or right on the touch screen to switch between different display modes:

• Front Camera Only
• Rear Camera Only
• Front + Rear Split View
• Rear + Front Split View
• Front + Rear (Front large, Rear small inset)
• Rear + Front (Rear large, Front small inset)

5.3 Menu Settings

Tap the screen to access the menu options. Use the touch interface to navigate and adjust settings such as:

• Video Resolution
• Loop Recording Duration (1/3/5 minutes)
• G-Sensor Sensitivity (Low/Medium/High)
• Motion Detection (On/Off)
• Parking Monitor (On/Off - requires hardwire kit)
• Date/Time Stamp
• Screen Saver (On/Off)

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your dash cam.

• Cleaning: Use a soft, dry cloth to clean the lens and screen. Avoid abrasive cleaners or solvents.
• SD Card Management: Format the SD card regularly (e.g., once a month) to prevent data corruption and ensure smooth recording. Back up important files before formatting.
• Temperature: Avoid exposing the device to extreme temperatures. Do not leave it in direct sunlight for extended periods in hot weather.
• Firmware Updates: Check the manufacturer's website periodically for firmware updates to improve performance and add new features.

7. Troubleshooting

If you encounter issues with your dash cam, refer to the following common problems and solutions:

8. Specifications

9. Warranty and Support

Your UNITOPSCI Mirror Dash Cam comes with a manufacturer's warranty and dedicated customer support.

• Warranty: This product is covered by a 2-Year Manufacturer Warranty. Please retain your proof of purchase for warranty claims.
• Technical Support: For any technical assistance, troubleshooting, or product inquiries, please contact our support team.

Contact Support: UNITOPSCI@126.com