1. Introduction
Thank you for choosing the HAUSHOF StainZapper Pro Portable Carpet and Upholstery Cleaner. This device is designed for effective spot cleaning of fabric sofas, carpets, car interiors, and other upholstered surfaces. Its powerful suction and dual-tank system ensure thorough cleaning without secondary contamination. Please read this manual carefully before use to ensure safe and optimal operation.
2. Safety Instructions
WARNING: To reduce the risk of fire, electric shock, or injury, read and follow all instructions carefully.
- Always disconnect the appliance from the power outlet before cleaning or performing maintenance.
- Do not immerse the appliance in water or other liquids.
- Use only HAUSHOF recommended cleaning solutions or low-foaming detergents. Excessive foaming can cause leaks and overflow from the dirty water tank.
- Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
- Do not use the appliance on wet surfaces or outdoors.
- Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
- Do not use without tanks in place.
- Supervise children and ensure they do not play with the appliance.
3. Product Overview
Components
The HAUSHOF StainZapper Pro includes the following main components:
- Main Unit with Handle
- Clean Water Tank (1500ml capacity)
- Dirty Water Tank (800ml capacity)
- Flexible Hose (160cm)
- Large Brush Attachment (18cm)
- Joint Brush Attachment
- Detergent Bottle
- Measuring Cup

Figure 3.1: HAUSHOF StainZapper Pro Components

Figure 3.2: Dual Tank System for Clean and Dirty Water
Specifications
| Feature | Specification |
|---|---|
| Model Name | StainZapper Pro |
| Power | 450W |
| Suction Power | 11.5 kPa |
| Clean Water Tank Capacity | 1.5 Liters (1500ml) |
| Dirty Water Tank Capacity | 0.8 Liters (800ml) |
| Product Dimensions | 19.6 x 38.5 x 30 cm |
| Item Weight | 3.85 kg |
| Hose Length | 160 cm |
| Power Cord Length | 300 cm |
| Noise Level | 85 Decibels |

Figure 3.3: Lightweight and Compact Design for Easy Storage

Figure 3.4: Hose and Power Cord Length for Extended Reach
4. Setup
- Unpack the Appliance: Carefully remove all components from the packaging.
- Assemble Tanks: Ensure the clean water tank and dirty water tank are correctly seated in the main unit. Press down firmly until you hear a click, indicating they are securely installed.
- Fill Clean Water Tank: Remove the clean water tank. Fill it with clean water up to the MAX line. Add a small amount of low-foaming cleaning solution using the provided measuring cup. Do not overfill.
- Attach Cleaning Nozzle: Connect the desired cleaning nozzle (large brush or joint brush) to the end of the flexible hose.
- Connect Power: Plug the power cord into a suitable electrical outlet.
Video 4.1: Demonstrates the setup process, including filling the clean water tank and attaching components.
5. Operating Instructions
The StainZapper Pro utilizes a three-step cleaning process: spray, brush, and vacuum.

Figure 5.1: All-in-One Cleaning Function: Spray, Brush, Vacuum

Figure 5.2: Three-Step Cleaning Process
- Power On: Press the power button to turn on the appliance.
- Spray: Hold the cleaning nozzle over the stained area. Press the spray trigger to release the cleaning solution onto the stain.
- Brush: Gently scrub the stained area with the brush attachment to loosen dirt and stains.
- Vacuum: Release the spray trigger and slowly move the nozzle over the treated area to vacuum up the dirty solution. Repeat steps 2-4 as needed until the stain is removed.
- Intelligent Stop Feature: The appliance is equipped with an intelligent stop feature. When the dirty water in the wastewater tank reaches approximately 800ml (above the maximum fill line), the suction will automatically stop to prevent overflow. The motor will continue to run. At this point, turn off the machine, empty the dirty water tank, and then resume cleaning.
Using Different Attachments

Figure 5.3: Large Brush and Joint Brush Attachments
- Large Brush Attachment: Ideal for general deep cleaning of larger surfaces like carpets, rugs, and wide sofa areas.
- Joint Brush Attachment: Designed for cleaning narrow gaps, crevices, and hard-to-reach areas such as sofa seams, car seat edges, and corners.
Application Examples

Figure 5.4: Cleaning a Carpet Stain

Figure 5.5: Cleaning a Sofa

Figure 5.6: Cleaning Car Seats
6. Maintenance
- Empty Dirty Water Tank: After each use, or when the intelligent stop feature activates, remove the dirty water tank and empty its contents into a drain. Rinse the tank thoroughly with clean water.
- Clean Nozzle and Hose: Disconnect the cleaning nozzle and rinse it under running water. Flush the hose with clean water to prevent blockages.
- Clean Main Unit: Wipe the exterior of the main unit with a damp cloth. Do not use abrasive cleaners.
- Storage: Wrap the hose around the designated storage area on the main unit. Store the appliance and its attachments in a cool, dry place, away from direct sunlight and out of reach of children. The compact design allows for easy storage in cabinets.
Video 6.1: Demonstrates emptying the dirty water tank and cleaning the nozzle.
7. Troubleshooting
If you encounter issues with your HAUSHOF StainZapper Pro, please refer to the following common problems and solutions:
No Water Spraying
- Check Clean Water Tank: Ensure the clean water tank is correctly installed and contains sufficient water and detergent. Press the tank firmly to ensure it clicks into place.
- Check for Blockages: Inspect the spray nozzle for any blockages. Clean if necessary.
Water Leakage
Water leakage can occur due to several reasons:

Figure 7.1: Troubleshooting Water Leakage
- Loose Tank: Ensure the clean and dirty water tanks are securely fastened and not loose.
- Missing/Damaged Sealing Ring: Check if the sealing ring on the dirty water tank's lid is present and undamaged. A missing or damaged ring can cause leaks.
- Clogged with Stains: If the dirty water tank's valve or components are clogged with debris or dried stains, it can prevent proper sealing. Clean these parts thoroughly.
- Blocked Valve Cable: Ensure the valve cable (if applicable) is not blocked or obstructed, allowing the valve to close properly.
If the problem persists after checking these points, please contact customer support.
8. Warranty and Support
HAUSHOF products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your purchase or visit the official HAUSHOF website. Please retain your proof of purchase for any warranty claims.





