VIVOHOME Cordless Pool Vacuum

1. Introduction

Thank you for choosing the VIVOHOME Cordless Pool Vacuum. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new pool cleaner. Designed for convenience and powerful performance, this vacuum will help keep your pool, spa, or hot tub spotless with minimal effort.

2. Safety Information

Please read all instructions carefully before using the appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always ensure the charging port is completely dry before connecting the charger.
• Keep the appliance out of reach of children and pets.
• Do not operate the vacuum if it appears damaged in any way.
• Use only the charger provided by the manufacturer.
• Do not attempt to disassemble or repair the unit yourself. Contact customer support for assistance.
• NOTE: Heavy sludge or algae may clog the filter and trigger motor overload protection. This will cause the red light to flash and the unit to shut down after 1 minute. Clean the filter and restart to resume normal operation.

3. Package Contents

Carefully unpack all items and ensure you have received the following components:

Figure 3.1: Included Components

• 1x Pool Vacuum Unit
• 1x Short Handle (2.95 ft)
• 1x Extension Pole (7.05 ft)
• 1x Telescopic Pole
• 1x Brush Head / Dirt Sucker
• 1x Charger
• 4x Filter Bags (2x 300 Mesh, 2x 500 Mesh)
• 1x User Manual

4. Product Features

• 4.1 Powerful Suction

  

  Figure 4.1: Powerful Suction Capability

  Equipped with a 40W motor, this vacuum delivers a strong 18.5 GPM suction, effectively removing various debris such as sand, small stones, twigs, and leaves from your pool floor.

• 4.2 Extended Reach & Maneuverability

  

  Figure 4.2: Extended Pole for Broad Cleaning Range

  The vacuum includes a 2.95 ft short handle for close-range cleaning and 7.05 ft extra-long poles, allowing for an extended reach of up to 9.12 ft. This provides a broader cleaning range, making it easy to reach far corners and the bottom of the pool without getting wet.

• 4.3 Fast Charging & Long Battery Life

  

  Figure 4.3: Efficient Battery Performance

  Powered by 5 x 2000mAh rechargeable lithium batteries, the vacuum offers up to 60 minutes of uninterrupted cleaning. A full charge takes approximately 1.5 hours. The integrated battery indicator light keeps you informed of the battery status, preventing unexpected interruptions.

  

  Figure 4.4: Battery Indicator Light Guide

• 4.4 Upgraded Dirt Sucker & Vacuum Head

  

  Figure 4.5: Versatile Cleaning Heads

  The dirt sucker features a larger inlet and optimized brush positions to enhance suction power and securely trap debris. The detachable dirt sucker is ideal for deep cleaning large pool floors, while the vacuum head excels at cleaning corners, gaps, and irregular areas.

• 4.5 Efficient Spot Cleaning

  

  Figure 4.6: Targeted Cleaning Efficiency

  This vacuum allows for instant, targeted cleaning of specific areas, quickly addressing localized dirt or debris and saving time and effort compared to automated cleaners.

• 4.6 Anti-Backflow Technology

  

  Figure 4.7: Anti-Backflow Valve

  An optimized one-way valve design ensures that once debris is collected, it remains securely trapped within the vacuum, preventing it from flowing back into the pool.

• 4.7 Cordless Design & Effortless Operation

  

  Figure 4.8: Design for Ease of Use

  The cordless design enhances mobility and flexibility. Its compact and detachable structure makes it easy to operate and store. The rubber charging port ensures enhanced safety during charging.

• 4.8 Reusable Filter Bags

  

  Figure 4.9: Filter Bag Types

  The vacuum comes with two types of reusable filter bags: 300 Mesh, suitable for larger particles (leaves, stones), and 500 Mesh, ideal for smaller particles (sand, sludge). Note: Not suitable for large-area algae cleaning.

• 4.9 Wide Compatibility

  

  Figure 4.10: Compatible Pool Surfaces

  This pool vacuum is suitable for different pool materials such as concrete, tile, and vinyl. It works effectively with various pool types, including in-ground pools, above-ground pools, hot tubs, and spas, cleaning both shallow and deep areas.

5. Setup Instructions

Follow these steps to assemble and prepare your pool vacuum for first use:

1. Charge the Battery: Before initial use, fully charge the vacuum's battery. Locate the rubber charging port and connect the provided charger. The battery indicator light will show charging status (refer to Figure 4.4). Ensure the port is dry.
2. Attach Filter Bag: Open the debris chamber and insert the desired filter bag (300 Mesh for larger debris, 500 Mesh for fine particles). Ensure it is securely seated.
3. Assemble Handle: Choose between the short handle or the extension/telescopic poles based on your cleaning needs. Connect the chosen pole securely to the main vacuum unit.
4. Attach Brush Head: Securely attach the brush head (dirt sucker) to the bottom of the vacuum unit.

Figure 5.1: Assembled Pool Vacuum

6. Operating Instructions

To begin cleaning your pool:

1. Submerge the Vacuum: Gently lower the assembled vacuum into the water until it is fully submerged.
2. Activate: Locate the power switch on the unit and turn it ON. The vacuum will begin to operate.
3. Clean Surfaces: Guide the vacuum along the pool floor, walls, steps, and corners. Use the dirt sucker for broad areas and the vacuum head for precise cleaning in tight spots.
4. Monitor Battery: Keep an eye on the battery indicator light (Figure 4.4) to know when recharging is needed.
5. Turn Off: Once cleaning is complete or the battery is low, turn the power switch OFF.
6. Remove from Water: Carefully lift the vacuum out of the water.

7. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your vacuum:

• Empty Debris Chamber: After each use, or when suction power decreases, empty the debris chamber.

Figure 7.1: Hassle-Free Maintenance

• Clean Filter Bags: Rinse the filter bags thoroughly with clean water to remove all trapped debris. Allow them to air dry completely before storing or reusing.
• Clean Vacuum Head: Periodically inspect and clean the brush head to ensure brushes are free of hair or large debris.
• Dry Charging Port: As a critical safety measure, always ensure the charging port is completely dry before plugging in the charger.
• Storage: Store the vacuum in a cool, dry place away from direct sunlight and extreme temperatures.

8. Troubleshooting

If you encounter issues with your VIVOHOME Pool Vacuum, refer to the following common problems and solutions:

For issues not listed here, or if solutions do not resolve the problem, please contact VIVOHOME customer support.

9. Specifications

10. Warranty and Support

This VIVOHOME product comes with a Limited Warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty card included in your package or visit the official VIVOHOME website.

If you require technical assistance, have questions about product operation, or need to report a defect, please contact VIVOHOME customer support through the contact information provided on the product packaging or their official website. Please have your model number (VH1715-GR) and purchase details ready when contacting support.