NEEWER MB-N11 Vertical Battery Grip Instruction Manual

1. Introduction

The NEEWER MB-N11 Vertical Battery Grip is designed to enhance the functionality and battery life of your Nikon Z6 II and Z7 II cameras. This grip provides an ergonomic design for comfortable vertical shooting and extends operational time by accommodating two EN-EL15c batteries. It also offers convenient controls for seamless operation in portrait orientation.

2. Safety Information

• Ensure the camera is powered off before attaching or detaching the battery grip.
• Use only compatible EN-EL15 series batteries (EN-EL15c, EN-EL15b, EN-EL15a, EN-EL15).
• Do not expose the battery grip or batteries to water, extreme temperatures, or direct sunlight.
• Keep out of reach of children.
• Avoid disassembling the product.

3. Package Contents

Verify that all items are present in your package:

• 1 x MB-N11 Replacement Battery Grip
• 2 x 2400mAh EN-EL15c Replacement Batteries
• 1 x USB Dual Channel Charger
• 1 x Micro USB Cable
• 1 x Cleaning Cloth

4. Product Overview

The MB-N11 battery grip is designed to provide extended power and improved handling for your Nikon Z6 II and Z7 II cameras. It features dedicated controls for comfortable vertical shooting and supports hot-swapping of batteries for uninterrupted operation.

Figure 1: NEEWER MB-N11 Battery Grip attached to a Nikon Z series camera, illustrating its professional appearance and compatibility.

Key Features:

• Extended Battery Life: Accommodates two EN-EL15c batteries for prolonged photography and videography sessions.
• Ergonomic Vertical Shooting: Features a shutter release, command dials, AF-ON button, and multi-selector for intuitive control in vertical orientation.
• Hot Swapping: Allows battery replacement without powering off the camera (requires two batteries installed).
• USB Type-C Charging: Supports in-grip charging for EN-EL15c/b batteries via a USB Type-C cable (not included).
• Tripod Mount: Integrated 1/4" threaded hole for mounting on tripods, light stands, or camera sliders.

5. Setup and Installation

5.1 Attaching the Battery Grip to the Camera

1. Power Off Camera: Ensure your Nikon Z6 II or Z7 II camera is powered off.
2. Remove Camera Battery and Cover: Open the camera's battery compartment, remove the battery, and detach the battery compartment cover.
3. Store Battery Cover: The MB-N11 battery grip includes a dedicated slot to store the camera's battery compartment cover. Insert the cover into this slot to prevent loss.
4. Mount Grip: Align the battery grip with the camera's battery compartment and the tripod socket. Insert the grip's contact pins into the camera's battery slot.
5. Secure Grip: Rotate the mounting screw on the battery grip clockwise until it is firmly secured to the camera's tripod socket.

Figure 2: Step-by-step installation of the MB-N11 battery grip on a Nikon Z series camera.

5.2 Inserting Batteries into the Grip

1. Open Battery Tray: Unlock and pull out the battery tray from the MB-N11 grip.
2. Insert Batteries: Insert one or two EN-EL15c (or compatible EN-EL15b/a/original EN-EL15) batteries into the tray, ensuring correct polarity.
3. Close Battery Tray: Slide the battery tray back into the grip and lock it securely.

6. Operating Instructions

6.1 Vertical Shooting Controls

The MB-N11 grip provides duplicate controls for comfortable vertical shooting:

• Shutter Release Button: Located on the grip for easy access during vertical shots.
• Command Dials: Front and rear command dials allow adjustment of exposure settings.
• AF-ON Button: For activating autofocus.
• Multi-Selector: For navigating menus and selecting focus points.

Figure 3: Illustrates the ergonomic design for both horizontal and vertical shooting with the MB-N11 grip.

6.2 Hot Swapping Batteries

The MB-N11 supports hot swapping, allowing you to replace one battery without turning off the camera. This feature is active only when two batteries are installed in the grip. The camera will seamlessly switch power sources, ensuring uninterrupted shooting.

6.3 Charging Batteries

You have two options for charging the batteries:

• In-Grip Charging: Insert one or two EN-EL15c or EN-EL15b batteries into the grip. Connect a USB Type-C cable (not included) to the grip's charging port. Charging indicators will show the status. Note: EN-EL15a and original EN-EL15 batteries do not support in-grip charging.
• USB Dual Channel Charger: Use the included USB Dual Channel Charger to charge two EN-EL15c batteries simultaneously. Connect the charger to a USB power source using the Micro USB cable.

Figure 4: Illustration of in-grip battery charging and charging indicators.

Figure 5: The included USB Dual Channel Charger with two EN-EL15c batteries, providing long-lasting power.

7. Maintenance

• Cleaning: Use the provided cleaning cloth to gently wipe the battery grip and camera contacts. This helps maintain cleanliness and ensures good electrical contact.
• Storage: When not in use for extended periods, remove batteries from the grip and store them in a cool, dry place.
• Avoid Impact: Protect the grip from drops and impacts to prevent damage to internal components.

Figure 6: Details of the MB-N11 grip, including copper electrical contacts for reliable performance.

8. Troubleshooting

• Grip not recognized by camera: Ensure the grip is securely attached and the mounting screw is tightened. Check that the camera's battery compartment cover is properly stored in the grip's slot, allowing the grip's contacts to connect.
• Batteries not charging in-grip: Confirm that you are using EN-EL15c or EN-EL15b batteries, as older EN-EL15a and original EN-EL15 models do not support this feature. Verify the USB Type-C cable and power source are functional.
• Vertical controls not responding: Check the lock switch on the battery grip. Ensure it is in the 'unlocked' position for the controls to function.
• Hot swapping not working: This feature requires two batteries to be present in the grip. Ensure both slots are populated with compatible batteries.

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the NEEWER official website or contact your retailer. Keep your purchase receipt as proof of purchase.