Neewer Z1-N Speedlite Flash for Nikon

Key Features

• High-power 76Ws output
• 2600mAh Lithium-ion battery for extended use
• 2.4GHz Wireless System for remote control and triggering
• i-TTL compatible flash for Nikon cameras
• Manual Flash Mode (M) with power adjustment from 1/1 to 1/256
• Stroboscopic/Repeater Mode (RPT) for multi-flash effects
• High-Speed Sync (HSS) up to 1/320s or 1/250s (FP)
• Flash Exposure Compensation (FEC) and Bracketing (FEB)
• Built-in 2W LED light (3300K ± 200K)
• Zoom range from 28mm to 105mm
• USB Type-C port for firmware updates
• S1/S2 Optical Slave Modes

2.4GHz Wireless System

The Z1-N features an integrated 2.4GHz wireless system, allowing it to function as a master or slave unit. It supports multiple groups (A, B, C, D, E) and channels for flexible control.

Master/Slave Functionality: Can control other compatible flashes or be controlled by a master unit.

GR/CH/ID Settings: Allows for precise grouping and channel assignment to avoid interference.

Range: Up to 100 meters.

Flash Modes

i-TTL Mode

Provides automatic flash exposure metering, ensuring correct flash output based on camera settings. Supports FEC/FEB for fine-tuning exposure.

Manual Mode (M)

Offers full control over flash power, adjustable from 1/1 (full power) down to 1/256. Allows precise power settings.

Stroboscopic/Repeater Mode (RPT)

Enables sequential flashing at adjustable frequencies (Hz) and a set number of times. For example, settings like 1-100Hz and specified times are supported.

S1/S2 Optical Slave Modes

Allows the flash to be triggered by the first or second pre-flash from another flash unit.

High-Speed Sync (HSS)

Enables flash synchronization at shutter speeds faster than the camera's standard sync speed, up to 1/320s or 1/250s (FP mode). This is useful for freezing motion or using wide apertures in bright light.

Integrated LED Light

A 2W LED light is built-in for continuous illumination, useful for video or focusing assistance. It has a color temperature of 3300K ± 200K.

Controls and Interface

The flash features an LCD display showing current settings. Key controls include:

• [MODE] Button: Cycles through i-TTL, M, RPT, and OFF modes.
• [ZOOM +/-] Button: Adjusts the flash head zoom position (28-105mm) and power levels.
• [M] Button: Directly accesses Manual flash mode.
• [RPT] Button: Directly accesses Stroboscopic mode.
• [SET] Button: Confirms settings.
• [MENU] Button: Accesses Custom Functions (C.Fn) and other settings.
• Navigation Buttons: Used for adjusting values and navigating menus.
• [USB Type-C Port]: Located for firmware updates.

Custom Function Menu (C.Fn): Allows users to configure various operational parameters, such as AF assist beam, LCD brightness, beep settings, and factory reset.

Power and Charging

Powered by a 7.4V, 2600mAh rechargeable Lithium-ion battery, providing ample shots per charge.

The battery can be charged using standard USB power sources via the Type-C port.

Specifications

Nikon Camera Compatibility

The Neewer Z1-N is designed to be compatible with a wide range of Nikon DSLR and Mirrorless cameras, including but not limited to:

• Nikon D Series: D4, D5, D6, D70, D80, D90, D100, D200, D300, D300S, D400, D500, D600, D610, D700, D750, D780, D800, D810, D850, D3100, D3200, D3300, D3400, D3500, D5000, D5100, D5200, D5300, D5600, D7000, D7100, D7200, D7500
• Nikon Z Series: Z5, Z6, Z6 II, Z7, Z7 II, Z8, Z9, Z50, Zfc
• (Note: Always check Neewer's official website for the most up-to-date compatibility list.)

Firmware Updates

Neewer provides firmware updates to enhance performance and add features. Updates can be downloaded from the official Neewer website and installed via the USB Type-C port using a computer.

Troubleshooting

If the flash displays an error code:

• E1: [Possible Battery Issue or Overheating]
• E2: [Possible Internal Circuit Issue]
• E3: [Possible Overheating Protection]
• (Refer to the full manual or Neewer support for detailed error code explanations.)