CADAC 1 Cook Turbo FFD Stove User Manual

1. Introduction

Thank you for choosing the CADAC 1 Cook Turbo FFD Stove. This compact and portable gas stove is designed for efficient and safe cooking, whether you are camping, caravanning, or enjoying outdoor meals. It features a powerful Turbo burner and a Flame Failure Device (FFD) for enhanced safety. Please read this manual carefully before use to ensure proper operation, maintenance, and safety.

2. Safety Information

WARNING: Failure to follow these instructions could result in fire, explosion, or carbon monoxide poisoning, which could cause property damage, personal injury, or death.

• Always use the appliance in a well-ventilated area.
• Do not operate the appliance in an enclosed space.
• Keep children and pets away from the appliance during use.
• Ensure the appliance is placed on a stable, level, and non-combustible surface.
• Do not move the appliance while it is in operation or still hot.
• Check all gas connections for leaks before each use. Use soapy water; never use a naked flame.
• The Flame Failure Device (FFD) will automatically cut off the gas supply if the flame extinguishes. Do not bypass or tamper with this safety feature.
• Only use the type of gas and pressure regulator specified for this appliance.

3. Product Overview

The CADAC 1 Cook Turbo FFD Stove is designed for portability and ease of use. Its compact form factor makes it ideal for travel.

Image: The CADAC 1 Cook Turbo FFD Stove in its open position, showing the burner and pan support.

Image: Detailed view highlighting the two practical wind shields and the automatic ignition button for easy startup.

Image: The stove's compact dimensions, approximately 28cm long, 29cm wide, and 9cm high, emphasizing its portability for travel.

Key Components:

• Burner: Powerful Turbo burner for efficient heating.
• Pan Support: Sturdy support for various cookware.
• Control Knob: For adjusting gas flow and flame intensity.
• FFD Button: Integrated Flame Failure Device for safety.
• Wind Shields: Two practical wind shields for improved performance and safety.
• Automatic Piezo Ignition: For quick and easy startup.

4. Setup

1. Unpack: Carefully remove the stove from its packaging. Retain packaging for future storage or transport.
2. Placement: Place the stove on a firm, level, and heat-resistant surface. Ensure there is adequate clearance from combustible materials (walls, curtains, etc.).
3. Connect Gas Supply: The stove is designed to be connected to various rechargeable gas bottles using a suitable hose and pressure regulator (not included). Ensure the connection is secure and leak-free. Refer to the gas bottle and regulator instructions for specific connection procedures.
   

   Image: The stove can be connected to various types of gas bottles using an appropriate hose and pressure regulator.
4. Leak Test: Before first use and after every gas cylinder change, perform a leak test. Apply a soapy water solution to all gas connections. Bubbles indicate a leak. If a leak is detected, turn off the gas supply immediately and tighten connections. If the leak persists, do not use the appliance and contact qualified personnel.

5. Operating Instructions

1. Ignition:
   • Ensure the gas supply is open.
   • Push and turn the control knob counter-clockwise to the 'MAX' position.
   • Simultaneously press the automatic piezo ignition button. You should hear a click and see the burner ignite.
   • If the burner does not ignite after a few attempts, turn off the gas, wait a minute, and try again.
2. Adjusting Flame: Once ignited, you can adjust the flame intensity by rotating the control knob between 'MIN' and 'MAX' settings.
3. Flame Failure Device (FFD): The FFD is a safety feature that automatically cuts off the gas supply if the flame goes out (e.g., due to wind or boil-over). If the flame extinguishes, the gas will stop flowing. To re-ignite, turn the control knob to 'OFF', wait a few seconds, and then follow the ignition steps again.
4. Wind Protection: The integrated wind shields help maintain flame stability and cooking efficiency, even in breezy conditions. They also act as a splash guard.
   

   Image: The stove in use, demonstrating how the wind protection also serves as a splash guard, ensuring efficient and clean cooking.
5. GreenGrill Coating: The stove's cooking surface features a GreenGrill coating, which is a durable non-stick ceramic coating free from harmful chemicals. This ensures easy cooking and cleaning.
6. Shutting Down: When finished cooking, turn the control knob to the 'OFF' position and close the gas supply valve on the gas bottle. Allow the stove to cool completely before handling or storing.

6. Maintenance and Care

• Cleaning:
  • Allow the stove to cool completely before cleaning.
  • Wipe down the exterior with a damp cloth and mild detergent.
  • For the GreenGrill cooking surface, use a soft sponge or cloth with warm soapy water. Avoid abrasive cleaners or metal scouring pads to protect the non-stick coating.
  • Ensure all parts are dry before storing.
• Storage: Store the stove in a dry, cool place, away from direct sunlight and extreme temperatures. Disconnect the gas bottle before storage.
• Regular Inspection: Periodically check the gas hose and connections for any signs of wear, cracks, or damage. Replace any damaged components immediately with genuine CADAC parts.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the official CADAC website or contact your local distributor. Keep your proof of purchase for any warranty claims.

No official product videos were provided for embedding in this manual.