1. Introduction
Thank you for choosing the tectake Ice Cube Maker, Model 405573. This appliance is designed to provide convenient and efficient ice production for your home. This manual contains important information regarding the safe operation, maintenance, and troubleshooting of your ice cube maker. Please read it thoroughly before first use and keep it for future reference.
2. Safety Instructions
To ensure safe operation and prevent damage, please observe the following safety precautions:
- Read all instructions carefully before operating the appliance.
- Keep the appliance out of reach of children and pets.
- Use only with the specified voltage (220-240V). Ensure the power outlet is properly grounded.
- Do not immerse the appliance, power cord, or plug in water or other liquids.
- Ensure adequate ventilation around the appliance. Do not block ventilation openings.
- Do not operate the appliance if the power cord or plug is damaged, or if the appliance malfunctions or has been damaged in any way. Contact customer service for repair.
- Do not place the appliance near heat sources or in direct sunlight.
- Only use potable water in the water reservoir.
- Unplug the appliance before cleaning or when not in use for extended periods.
3. Package Contents
Verify that all items are present in the package:
- 1 x tectake Ice Cube Maker
- 1 x Ice Cube Basket
- 1 x Ice Scoop
- 1 x User Manual
Image: The tectake Ice Cube Maker, including the removable ice basket and scoop, illustrating the two available ice cube sizes.
4. Setup
- Unpacking: Carefully remove the ice cube maker and all accessories from the packaging. Retain packaging for future transport or storage.
- Placement: Place the appliance on a stable, level, and heat-resistant surface, away from direct sunlight and heat sources. Ensure there is sufficient space around the unit for proper ventilation.
- Initial Cleaning: Before first use, clean the interior of the ice cube maker, the water reservoir, ice basket, and scoop with a soft cloth and mild detergent. Rinse thoroughly with clean water.
- Fill Water Reservoir: Open the lid and fill the water reservoir with potable water up to the MAX fill line. Do not overfill. The reservoir has a capacity of approximately 1.2 liters.
- Connect Power: Plug the power cord into a grounded electrical outlet.
5. Operating Instructions
- Power On: Press the "ON/OFF" button on the control panel to turn on the ice cube maker. The "POWER" indicator light will illuminate.
- Select Ice Cube Size: Press the "SELECT" button to choose between small (S) or large (L) ice cubes. The corresponding indicator light will illuminate.
- Ice Production: The appliance will begin the ice production cycle automatically. The first batch of ice cubes will be ready in approximately 6 to 13 minutes, depending on the selected size and ambient temperature.
- Indicator Lights:
- "ADD WATER" (Red): This light indicates that the water reservoir needs to be refilled. Add more water and the appliance will resume operation.
- "ICE FULL" (Green): This light indicates that the ice basket is full. Remove ice cubes to continue production.
- Removing Ice: Once ice cubes are formed, use the provided ice scoop to transfer them from the ice basket to your drinks or a freezer bag for storage. The ice basket is removable for easy access.
- Power Off: Press the "ON/OFF" button again to turn off the appliance.
Image: Detailed view of the ice maker's control panel and internal components during operation.
Image: The intuitive control panel with clear indicator lights for water level and ice basket status.
6. Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your ice cube maker.
- Automatic Cleaning Program: The appliance features a convenient automatic cleaning program. Refer to the specific instructions in your included manual for how to activate this function via the ON/OFF button.
- Draining Water: To drain residual water from the reservoir, locate the drain plug at the bottom of the appliance. Remove the plug to allow water to flow out. Ensure the appliance is unplugged before draining.
- Regular Cleaning:
- Clean the interior and exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Periodically clean the ice basket and ice scoop with warm, soapy water, then rinse and dry thoroughly.
- For thorough cleaning, it is recommended to run the automatic cleaning cycle regularly.
- Storage: If the appliance will not be used for an extended period, drain all water, clean the unit, and ensure it is completely dry before storing it in a cool, dry place.
Image: Close-up of the drain plug for easy water drainage.
7. Troubleshooting
If you encounter issues with your ice cube maker, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not turn on | No power supply | Check if the power cord is securely plugged into a working outlet. |
| "ADD WATER" indicator is on | Water reservoir is empty | Fill the water reservoir with potable water up to the MAX line. |
| "ICE FULL" indicator is on | Ice basket is full | Remove ice cubes from the basket. |
| No ice production | Insufficient water, high ambient temperature, or air blockage | Ensure water reservoir is full. Place the unit in a cooler environment. Check for any obstructions in the ice-making mechanism. |
| Ice cubes are too small or melt quickly | Water temperature too high, or ambient temperature too high | Use colder water. Ensure the appliance is in a well-ventilated, cooler area. Select the large ice cube size. |
If the problem persists after attempting these solutions, please contact tectake customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | 405573 |
| Total Dimensions (L x W x H) | Approx. 24 x 30 x 29 cm |
| Weight | Approx. 6.2 kg |
| Ice Production Capacity | 12 kg / 24 hours |
| Ice Production Cycle | Approx. 6 - 13 minutes |
| Water Tank Capacity | Approx. 1.2 L |
| Ice Basket Capacity | Approx. 0.6 kg |
| Voltage | 220 - 240 V |
| Power | 100 Watts |
| Cable Length | Approx. 155 cm |
| Materials | Steel, Copper, Stainless Steel, Aluminum, Polypropylene, ABS Plastic |
Image: Technical specifications and dimensions of the ice cube maker.
9. Warranty and Support
For warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support or service inquiries, please visit the official tectake website or contact their customer service department directly. Keep your proof of purchase for warranty claims.
