BuTure VAC Beta07 Portable Car Battery Jump Starter with Air Compressor Instruction Manual

1. Setup

1.1 Package Contents

Verify all items are present in the package:

• 8000A Jump Starter with 160PSI Air Compressor
• Detachable Extended Air Hose & 3 Air Nozzles
• Heavy-Duty Jumper Cables & 400V Insulated Gloves
• USB & USB-C Quick Charging Cables
• Instruction Manual & FAQ Card & Rugged Carrying Case

Image: The BuTure VAC Beta07 Jump Starter and all included accessories neatly organized within its rugged carrying case.

1.2 Initial Charging

Before first use, fully charge the jump starter. Connect the provided USB-C cable to the unit's PD45W USB-C IN/OUT port and to a compatible wall charger (not included). The display will show the charging progress. A full charge ensures optimal performance.

Image: The BuTure VAC Beta07 Jump Starter connected via USB-C cable for charging, displaying the charging status.

2. Operating Instructions

2.1 Jump Starting a Vehicle

The BuTure VAC Beta07 can jump start vehicles with up to all gas or 14L diesel engines, even with completely drained batteries.

1. Connect Clamps: Ensure the jump starter is off. Connect the red clamp to the vehicle's positive (+) battery terminal and the black clamp to the negative (-) battery terminal.
2. Connect to Jump Starter: Insert the blue plug of the jumper cables into the jump start port on the unit.
3. Activate Boost: Turn on the jump starter. If the vehicle battery is extremely low or completely dead, press and hold the 'BOOST' button until the display shows 'BOOST'.
4. Start Vehicle: Start your vehicle's engine within 30 seconds.
5. Disconnect: Once the engine starts, immediately remove the jumper cables from the jump starter, then disconnect the clamps from the vehicle battery.

Image: The BuTure VAC Beta07 Jump Starter connected to a car battery using the red and black clamps, ready for jump starting.

2.2 Using the Air Compressor

The unit features a 160PSI cordless inflator with smart preset and auto shut-off.

1. Connect Air Hose: Screw the detachable air hose into the air compressor port on the unit. Attach the other end to the tire valve.
2. Select Mode/Set Pressure: Turn on the jump starter. Press the 'M' button to cycle through 5 inflation modes (Car, Motorcycle, Bicycle, Ball, Manual) or use the '+' and '-' buttons to set the desired PSI. The large display shows real-time pressure.
3. Start Inflation: Press and hold the inflation button (often indicated by an air pump icon) to begin inflating. The unit will automatically stop when the preset pressure is reached.
4. Disconnect: Remove the air hose from the tire valve and then from the unit.

Image: The BuTure VAC Beta07 Jump Starter connected to a car tire, actively inflating it with the digital display showing pressure readings.

2.3 Using as a Power Bank

The unit features PD45W USB-C IN/OUT and two 18W USB-A fast output ports for charging multiple devices simultaneously.

• Connect your device's charging cable to the appropriate USB port on the jump starter.
• The unit will automatically begin charging your device.

Image: The BuTure VAC Beta07 Jump Starter connected to and charging a smartphone and a tablet simultaneously, demonstrating its power bank capabilities.

2.4 Using Emergency Lights

The 800 lumens LED lights offer four modes for various emergency situations:

• Flashlight: For general illumination.
• Strobe (White): For signaling.
• Warning (Orange Strobe): Can double as a warning triangle for roadside emergencies.
• SOS: For distress signaling.

Press the light button to cycle through the modes. Hold the button to turn off the light.

Image: The BuTure VAC Beta07 Jump Starter with its bright LED light illuminated, demonstrating its use as an emergency light source.

3. Maintenance

3.1 Charging the Unit

To maintain battery health, fully charge the unit every 3-6 months, even if not in use. The PD45W fast charging allows the unit to charge from 0% to 80% in approximately 1 hour.

3.2 Storage

Store the unit in its rugged carrying case in a cool, dry place. Avoid extreme temperatures. The unit has a standby time of approximately 24 months on a full charge.

4. Troubleshooting

4.1 Common Issues

• Unit Not Turning On: Ensure the unit is charged. If the battery is completely depleted, it may take a few minutes of charging before the display activates.
• Vehicle Not Starting: Check that the jumper cables are securely connected to both the jump starter and the vehicle battery terminals. Ensure the 'BOOST' function is activated if the battery is completely dead.
• Air Compressor Not Inflating: Verify the air hose is properly screwed in and the valve adapter is securely attached to the tire. Check that the correct inflation mode is selected and the desired PSI is set.
• Error Codes: Refer to the included FAQ card or the full instruction manual for specific error code meanings and solutions.

5. Specifications

6. Warranty & Support

BuTure VAC stands behind its products with a 2-year warranty, hassle-free returns, and lifetime technical support. For any issues or inquiries, please contact customer service.