Introduction
This manual provides detailed instructions for the safe and effective use of your KEMEI Professional Hair Clipper, Model KM-2035. Designed for precise hair cutting, this rechargeable, cordless electric clipper and trimmer offers convenience and performance for both home and professional use. Please read this manual thoroughly before operation and retain it for future reference.
Safety Information
Always use with caution near the face and eyes. Supervise children when in use.
Important Safety Precautions:
- Do not immerse the clipper in water.
- Keep the appliance away from water sources.
- Ensure the power adapter is compatible with your local voltage.
- Do not use if the cord or plug is damaged.
- Keep out of reach of children.
- Unplug the clipper before cleaning or maintenance.
- Only use attachments supplied by the manufacturer.
Product Overview & What's in the Box
Your KEMEI KM-2035 Hair Clipper package includes the following components:
Figure 1: KEMEI KM-2035 Hair Clipper with charging base, guide combs (3mm, 6mm, 10mm, 13mm), cleaning brush, blade oil, and USB charging cable.
- KEMEI KM-2035 Hair Clipper
- Charging Base
- 4 Guide Combs (3mm, 6mm, 10mm, 13mm)
- Cleaning Brush
- Blade Oil
- USB Charging Cable
- User Manual
Setup
1. Initial Charging
Before first use, fully charge the hair clipper. Connect the USB charging cable to the charging base and a compatible USB power source (e.g., computer, car charger, mobile power adapter). Place the clipper onto the charging base. The LED display will show the battery percentage and a charging reminder icon.
Figure 2: The clipper can be charged via USB cable directly or using the charging base. The LED display indicates charging status.
- Charging Time: Approximately 180 minutes for a full charge.
- Operating Time: Up to 100 minutes on a full charge.
2. Attaching Guide Combs
Select the desired guide comb (3mm, 6mm, 10mm, or 13mm) for your preferred hair length. Align the comb with the clipper blade and push it firmly until it clicks into place.
Figure 3: The adjustable lever allows for fine-tuning blade spacing, and guide combs provide specific cutting lengths.
To remove a guide comb, gently pull it away from the blade.
Operating Instructions
1. Power On/Off
Press the power button to turn the clipper on. Press it again to turn it off.
2. Adjusting Blade Length
The clipper features an adjustable lever on the side, allowing you to fine-tune the blade spacing for different cutting lengths without a guide comb, or to adjust the blend when using guide combs.
3. Using the Turbo Mode
Press the "Turbo" button to activate a higher speed setting for thicker hair or faster cutting. Press it again to return to standard speed.
Figure 4: The LED display provides real-time information on motor speed, battery percentage, and reminders for oiling and charging.
4. Hair Cutting Technique
- Start with clean, dry hair.
- Always cut against the direction of hair growth.
- Use smooth, overlapping strokes for an even cut.
- Begin with a longer guide comb and gradually switch to shorter ones if desired.
Maintenance
1. Cleaning the Blades
After each use, turn off the clipper and remove the guide comb. Use the provided cleaning brush to remove any loose hairs from the blades and the clipper body. For thorough cleaning, the blade assembly can be carefully detached (refer to Figure 5 for blade details) and rinsed under running water, ensuring the main body of the clipper does not get wet.
Figure 5: The sharp, R-shaped obtuse angle blades are designed for smooth cutting. Regular cleaning is essential.
2. Oiling the Blades
Regular oiling ensures optimal performance and extends blade life. After cleaning, apply a few drops of the supplied blade oil to the teeth of the blades. Turn the clipper on for a few seconds to distribute the oil evenly. Wipe off any excess oil with a soft cloth. The LED display will show an oil reminder icon when lubrication is needed.
3. Storage
Store the clipper in a dry, cool place, away from direct sunlight and moisture. Ensure the clipper is turned off and fully charged before storing for extended periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clipper does not turn on. | Low battery or no charge. | Charge the clipper fully. Ensure the charging cable and base are properly connected. |
| Clipper pulls hair or cuts unevenly. | Blades are dull, dirty, or not oiled. Hair is not clean or dry. | Clean and oil the blades. Ensure hair is clean and dry before cutting. Consider replacing blades if dull. |
| Clipper makes unusual noise. | Blades require oiling or are obstructed. | Apply blade oil. Clean any debris from the blade area. |
| LED display not working. | Unit is off or battery is completely drained. | Turn on the clipper. Charge the clipper. If the issue persists, contact customer support. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | KM-2035 |
| Product Dimensions | 7.2 x 1.97 x 1.57 inches |
| Weight | 11.71 ounces |
| Battery Type | Lithium-Ion (1 12V battery included) |
| Charging Time | 180 minutes |
| Operating Time | Approx. 100 minutes |
| Power Source | USB Charging |
| Manufacturer | KEMEI |
Official Product Videos
Watch these official videos for visual guidance on using your KEMEI Professional Hair Clipper.
KEMEI 2035 Professional Hair Clipper Overview
This video provides a detailed overview and demonstration of the KEMEI KM-2035 Professional Hair Clipper, including its features and operation.
KEMEI Professional Hair Clipper for Men Demonstration
A demonstration video showcasing the KEMEI Professional Hair Clipper in use for men's grooming, highlighting its cutting capabilities.
Customer Support
For further assistance, troubleshooting, or inquiries regarding your KEMEI Professional Hair Clipper, please refer to the contact information provided with your purchase or visit the official KEMEI website.
