Jordan 1 Low Alt Little Kids' Shoes Instruction Manual

Introduction

This instruction manual provides essential information for the proper use, care, and maintenance of your Jordan 1 Low Alt Little Kids' Shoes, model DR9748-042. Designed for comfort and durability, these shoes feature a convenient hook-and-loop closure system and robust construction suitable for active children.

Setup and Initial Use

The Jordan 1 Low Alt Little Kids' Shoes are designed for immediate use. Follow these steps for initial setup:

1. Unboxing: Carefully remove the shoes from their packaging. Inspect them for any visible damage or manufacturing defects.
2. First Fit: Open the hook-and-loop closure system completely to allow for maximum opening of the shoe. This system is designed to make it easy to put the shoe on and take it off little feet.
3. Using the Heel Pull: Utilize the heel pull tab located at the back of the shoe to assist in guiding the foot into the shoe.
4. Securing the Fit: Once the foot is comfortably inside, secure the hook-and-loop closure system to achieve a snug yet comfortable fit. Ensure it is not too tight to restrict circulation or too loose to cause slippage.

Figure 1: Side view of the Jordan 1 Low Alt Little Kids' Shoe, highlighting the overall design and hook-and-loop system.

Operating (Wearing) Instructions

These shoes are intended for everyday wear and athletic activities for children. To ensure optimal performance and comfort:

• Proper Sizing: Always ensure the shoes are the correct size for the child's foot. Refer to the size guide if available, or consult a professional for fitting.
• Secure Closure: Before any activity, ensure the hook-and-loop closure is firmly fastened to prevent the shoe from slipping off and to provide adequate support.
• Traction: The rubber outsoles are designed to provide ample traction on various surfaces. Exercise caution on wet or slippery surfaces.

Figure 2: View of the shoe's rubber outsole, designed for traction and durability.

Maintenance and Care

Proper maintenance will extend the lifespan and preserve the appearance of your Jordan shoes. The shoes are constructed from genuine and synthetic leathers.

• Cleaning:
  • For light dirt, wipe the surface with a soft, damp cloth.
  • For stubborn stains, use a mild leather cleaner specifically designed for genuine and synthetic leathers. Apply sparingly with a soft brush or cloth.
  • Avoid harsh chemicals, abrasive cleaners, or machine washing, as these can damage the materials and construction.
• Drying: Allow shoes to air dry naturally at room temperature. Do not expose them to direct heat sources (e.g., radiators, direct sunlight) as this can cause the materials to crack or warp.
• Storage: Store shoes in a cool, dry place away from direct sunlight when not in use. Using shoe trees can help maintain their shape.
• Odor Control: If odors develop, remove insoles (if removable) and air them out. You can also use shoe deodorizers.

Troubleshooting

Below are common issues and general advice:

• Shoe feels too tight/loose: Re-check the sizing. Ensure the hook-and-loop closure is adjusted correctly. If the issue persists, the shoe size may be incorrect.
• Squeaking noise: This can sometimes occur with new shoes or if moisture gets between the insole and the sole. Try removing and reinserting the insole, or apply a small amount of baby powder underneath it.
• Stains on material: Refer to the "Maintenance and Care" section for cleaning instructions. Act quickly on new stains.

Specifications

Warranty and Support

For information regarding product warranty, returns, or additional support, please refer to the retailer's or manufacturer's official website. Keep your proof of purchase for any warranty claims.

For general inquiries or further assistance, please contact the customer service department of the retailer where the product was purchased.