Introduction
Thank you for choosing the Noise Buds VS601 True Wireless Earbuds. This manual provides essential information for setting up, operating, and maintaining your earbuds to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.
What's in the Box
The Noise Buds VS601 package includes the following items:
- 1N Bluetooth Headphone
- 1N Charging Case
- 1N Charging Cable (Type-C)
- 1N User Manual
- 1N Warranty Registration Card
Setup
1. Initial Charging
Before first use, fully charge the earbuds and the charging case. Connect the provided Type-C charging cable to the charging port on the case and a compatible USB power source. The indicator lights on the case will show the charging status. A full charge provides up to 50 hours of total playtime (7 hours on earbuds, 43 hours from case).
Image: Noise Buds VS601 charging case indicating 50 hours of total playtime.
2. Pairing with a Device
- Ensure both earbuds are charged.
- Open the charging case lid. The earbuds will automatically enter pairing mode.
- On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "Noise Buds VS601" from the list of detected devices.
- Once connected, you will hear a confirmation tone, and the earbuds will be ready for use.
Image: Overview of Noise Buds VS601 features, highlighting HyperSync for fast and stable connection.
3. Dual Device Pairing
The Noise Buds VS601 support dual device pairing, allowing seamless switching between two connected devices.
- Pair the earbuds with your first device as described above.
- Disconnect the earbuds from the first device's Bluetooth settings.
- Put the earbuds back in the case, close the lid, then open it again to re-enter pairing mode.
- Pair the earbuds with your second device.
- To switch between devices, simply play audio on the desired device. The earbuds will automatically connect to the active audio source.
Image: Noise Buds VS601 demonstrating simultaneous connection to a smartphone and a tablet for dual device pairing.
Operating Instructions
1. Wearing the Earbuds
Gently insert the earbuds into your ears, ensuring a comfortable and secure fit. Adjust them until the sound is clear and the fit is snug to optimize audio quality and noise isolation.
2. Touch Controls
The Noise Buds VS601 feature intuitive touch controls on each earbud. Specific functions may vary slightly based on your device and application, but common controls include:
- Play/Pause: Single tap on either earbud.
- Next Track: Double tap on the right earbud.
- Previous Track: Double tap on the left earbud.
- Answer/End Call: Single tap on either earbud.
- Reject Call: Long press on either earbud.
- Activate Voice Assistant (Siri/Google Assistant): Triple tap on either earbud.
3. Instacharge Feature
The Instacharge feature allows for quick power-ups. A 10-minute charge provides approximately 150 minutes of playtime, ensuring you can get back to your audio quickly.
Image: Noise Buds VS601 charging case, illustrating the Instacharge capability: 10 minutes of charge yields 150 minutes of playtime.
4. Quad Mic with ENC
The earbuds are equipped with a Quad microphone system and Environmental Noise Cancellation (ENC) for clear call quality, even in noisy environments.
Image: Close-up of a Noise Buds VS601 earbud, indicating the Quad mic with ENC feature for enhanced call clarity.
5. SonicBlend Drivers and Low Latency
Experience immersive audio with 10mm SonicBlend drivers, designed to deliver clear sound and deep bass. The earbuds also feature low latency, which is beneficial for gaming and video playback, minimizing audio delay.
Image: Noise Buds VS601 features, showing the 10mm driver for audio quality and low latency for gaming.
Maintenance
1. Cleaning
Regularly clean your earbuds and charging case to maintain optimal performance and hygiene. Use a soft, dry, lint-free cloth. Do not use abrasive cleaners or immerse the earbuds or case in water.
- Gently wipe the earbud surfaces and charging contacts.
- Remove any earwax or debris from the ear tips and speaker mesh using a small, soft brush or cotton swab.
2. Water Resistance (IPX5)
The Noise Buds VS601 are rated IPX5 water resistant, meaning they can withstand splashes of water and sweat. They are not designed for submersion in water or for use during swimming. Ensure the earbuds are dry before placing them back in the charging case to prevent damage.
Image: Noise Buds VS601 features, indicating IPX5 water resistance for protection against splashes and sweat.
Troubleshooting
If you encounter issues with your Noise Buds VS601, refer to the following common solutions:
1. Earbuds Not Pairing or Connecting
- Ensure both earbuds are charged.
- Place earbuds back in the case, close the lid, then open it again to reset pairing mode.
- Turn off and on Bluetooth on your device.
- Forget "Noise Buds VS601" from your device's Bluetooth list and attempt to pair again.
- Try pairing with a different device to rule out device-specific issues.
2. One Earbud Not Working
- Ensure both earbuds are charged.
- Place both earbuds in the charging case, close the lid, and then open it.
- Clean the charging contacts on both the earbuds and inside the case.
- Perform a factory reset (refer to the "Factory Reset" section if available in the full product manual, or contact support).
3. Charging Issues
- Verify the charging cable is securely connected to both the case and the power source.
- Try a different Type-C charging cable and power adapter.
- Ensure the charging contacts on the earbuds and case are clean and free of debris.
4. Poor Call Quality (ENC)
- Ensure the earbuds are properly seated in your ears.
- Check for any obstructions around the microphone areas.
- Test call quality in a quieter environment to determine if external noise is overwhelming the ENC.
5. Accidental Factory Reset
Some users have reported accidental factory resets due to sensitive touch controls. If this occurs, re-pair your earbuds with your device as per the "Pairing with a Device" instructions.
Specifications
| Brand | Noise |
| Model Name | Buds VS601 |
| Model Number | AUD-HDPHN-BUDSVS601-GRN |
| Ear Placement | In Ear |
| Form Factor | True Wireless |
| Bluetooth Version | 5.3 |
| Bluetooth Range | 10 Metres |
| Audio Driver Size | 10 Millimetres |
| Battery Average Life (Earbuds) | 7 Hours |
| Total Playtime (with case) | Up to 50 Hours |
| Instacharge | 10 min charge = 150 min playtime |
| Microphone | Quad mic with ENC |
| Water Resistance | IPX5 |
| Control Method | Voice, Touch |
| Compatible Devices | Cellphones, Desktops, Gaming Consoles, Laptops, Tablets |
| Charging Port | Type-C |
| Material | Polycarbonate (PC) |
| Item Weight | 50 Grams |
Warranty Information
The Noise Buds VS601 come with a 1-year warranty provided by the manufacturer from the date of purchase. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the Warranty Registration Card included in your package or visit the official Noise website.
Support
For any queries, technical assistance, or support, please contact Noise customer service:
- Manufacturer: Nexxbase Marketing Pvt. Ltd.
- Manufacturer Contact: 8882-132-132
- Importer: Nexxbase Marketing Pvt. Ltd.
- Importer Contact: 02268056289
- Address: 15th Floor, DLF City Phase 5, Two Horizon Center, Golf Course Road, Sector 43, Gurugram, Haryana - 122002, India
- Official Website: www.gonoise.com