Onerbl AC-DC Adapter User Manual

Introduction

Thank you for choosing the Onerbl AC-DC Adapter. This power supply is designed to provide reliable charging and operation for your YaberAuto YA70 or YA80 Car Jump Starter. It converts standard AC power from an electrical outlet into the DC power required by your device. This adapter has been tested to ensure compatibility and performance.

Compatibility: This adapter is specifically compatible with YaberAuto YA70 and YA80 Car Jump Starters with a 21800 Milliamp Hours battery capacity, requiring 5V 2A (DC5V 2000mA, 5VDC 2.0A, 5.0V) power input.

Safety Information

• Read all instructions before using the adapter.
• Do not expose the adapter to rain, moisture, or extreme temperatures.
• Ensure the adapter is connected to a power outlet with the correct voltage (110 Volts AC).
• Do not use the adapter if the cord or plug is damaged.
• Keep the adapter away from children.
• Unplug the adapter from the power outlet when not in use or during electrical storms.
• This adapter features short circuit protection for enhanced safety.

Setup

1. Inspect the Adapter: Before first use, visually inspect the adapter and its cable for any signs of damage.
2. Connect to Jump Starter: Locate the charging port on your YaberAuto YA70 or YA80 Car Jump Starter. Insert the barrel connector of the Onerbl AC-DC Adapter firmly into this port.
3. Connect to Power Outlet: Plug the AC end of the adapter into a standard 110V AC electrical wall outlet.

Image: The Onerbl AC-DC Adapter with its barrel connector and AC plug, ready for connection. This image illustrates the physical appearance of the adapter.

Operating Instructions

Once the adapter is properly connected to both the jump starter and a power outlet, the jump starter will begin to charge. Refer to your YaberAuto jump starter's manual for specific charging indicators (e.g., LED lights) and expected charging times.

• Ensure the jump starter is powered off before connecting the charger, if recommended by the jump starter's manufacturer.
• Monitor the charging process. Disconnect the adapter once the jump starter is fully charged to prevent overcharging, if your jump starter does not have automatic charge termination.

Maintenance

• Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Storage: Store the adapter in a cool, dry place when not in use. Avoid wrapping the cable too tightly around the adapter to prevent damage to the wiring.
• Cable Care: Do not bend, twist, or pull the cable excessively. Avoid placing heavy objects on the cable.

Troubleshooting

• Jump Starter Not Charging:
  • Ensure all connections are secure between the adapter, jump starter, and wall outlet.
  • Try plugging the adapter into a different wall outlet to rule out a faulty outlet.
  • Important Note: Rechargeable batteries have a limited lifespan, typically 1 to 3 years. If the jump starter's battery is old or dead, it may not accept a charge, even with a functional charger. This is not an issue with the charger itself. To determine if the battery or charger is at fault, a voltmeter is required to test the charger's output.
• Adapter Feels Warm: It is normal for the adapter to feel slightly warm during operation. If it becomes excessively hot or emits smoke/odor, immediately unplug it and discontinue use.

Specifications

Warranty and Support

This Onerbl AC-DC Adapter is manufactured to high-quality standards. For any issues or support inquiries, please contact the seller or manufacturer directly. Please retain your purchase receipt for warranty claims, if applicable.